• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1672-1678
• /
• 2007

The communication systems and characteristics of transmit are very importance a serious view of ubiquitores society. The high rate systems have to construct for data of voice, graphics and moving-video with the multimedia to transmit on the low frequency band. The rate of data are relation that there are the bandwidth of line and channels, the bit per second and communication-systems. This paper study for the error performance of 2, 4 8 level FSK to transmit amount of data in the communication systems and design to FDM system.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.7-17
• /
• 2023

The error-rate floor of low-density parity-check (LDPC) codes is attributed to the trapping sets of their Tanner graphs. Among them, fully absorbing sets dominantly affect the error-rate performance, especially for short blocklengths. Efficient methods to identify the dominant trapping sets of LDPC codes were thoroughly researched as exhaustively searching them is NP-hard. However, the existing methods are ineffective for Raptor-like LDPC codes, which have many types of trapping sets. An effective method to identify dominant fully absorbing sets of Raptor-like LDPC codes is proposed. The search space of the proposed algorithm is optimized into the Tanner subgraphs of the codes to afford time-efficiency and search-effectiveness. For 5G New Radio (NR) base graph (BG) 2 LDPC codes for short blocklengths, the proposed algorithm finds more dominant fully absorbing sets within one seventh of the computation time of the existing search algorithm, and its search-effectiveness is verified using importance sampling. The proposed method is also applied to 5G NR BG1 LDPC code and Advanced Television Systems Committee 3.0 type A LDPC code for large blocklengths.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.735-745
• /
• 2016

The Paris agreement at the 21st Conference of the Parties (COP21) emphasizes the reduction of greenhouse gas emissions and increase in energy consumption in all areas. Thus, an important aspect is energy saving in buildings where the lighting is a major component of the electrical energy consumption. This paper proposes a building energy management system employing visible light communication (VLC) based on LED lighting. The proposed management system has key characteristics including personalization and localization by utilizing such VLC advantages as secure communication through light and location-information transmission. Considering the efficient implementation of an energy-consumption adjustment using LED luminaires, this paper adopts variable pulse position modulation (VPPM) as a VLC modulation scheme with simple controllability of the dimming level that is capable of providing a full dimming range. This paper analyzes the VPPM performances according to variable dimming for several schemes, and proposes a VPPM demodulation architecture based on dimming-factor acquisition, which can obtain an improved performance compared to a 2PPM-based scheme. In addition, the effect of a dimming-factor acquisition error is analyzed, and a frame format for minimizing this error effect is proposed.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.168-180
• /
• 2017

Purpose: In this research, we develop an effectiveness analysis simulation model using Agent Based Modeling with Communication Effects for the development of a new weapon system. Methods: To describe the future battlefield that has more complexity, we develop Agent Based Modeling to describe communication Effects. We use the communication theory (Path-Loss Model) and the real map. Results: We have compared simulation model with real map and simulation model without real map. The Blue Survival Ratio of simulation model with real map is worse than one without real map since the performance of communication gets lower. Conclusion: There are many studies about the effectiveness analysis of a weapon system. Most of previous researches assumed no communication error. In the real world, however, it's not appropriate assumption. Therefore, this study considers the communication error and shows that it is important factor in the effectiveness analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4957-4976
• /
• 2016

This paper investigates the error performance of the amplify-and-forward (AF) relaying systems in the context of full-duplex (FD) communication. In addition to the inherent self-interference (SI) due to simultaneous transmission and reception, coexistent FD terminals may cause crosstalk. In this paper, we utilize the information exchange via the crosstalk channel to construct a particular distributed space-time code (DSTC). The residual SI is also considered. Closed-form pairwise error probability (PEP) is first derived. Then we obtain the upper bound of PEP in high transmit power region to provide more insights of diversity and coding gain. The proposed DSTC scheme can attain full cooperative diversity if the variance of SI is not a function of the transmit power. The coding gain can be improved by lengthening the frame and proper power control. Feasibility and efficiency of the proposed DSTC are verified in numerical simulations.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.51-55
• /
• 2006

Digital satellite communication systems are usually integrated with terrestrial systems to provide various services. In these cases, they should satisfy the performance objectives defined by the terrestrial systems. Recommendation ITU-R S.1062 specifies the error performance objectives of digital satellite communication systems operating below 15 GHz. The error performance are given in terms of bit error probability divided by the number of the average bit errors in the burst ($\alpha$). This paper presents a theoretical method to estimate $\alpha$ that is a very important parameter in the satellite communication systems to analyze the error performance objectives. We show performance estimation result of DVB-RCS turbo code using the presented method, and verify them by comparing to the simulation results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.105-111
• /
• 2017

This paper compares the SE-MMA (Signed Error-MMA) and QE-MMA (Quantized Error-MMA) adaptive equalization algorithm in order to compensates the intersymbol interference due to channel in the transmission of spectral efficient nonconstant modulus signal such as 16-QAM. In the currently MMA adaptive equalizer, the error signal is needed for the updating the tap coefficient. The SE-MMA uses the polarity of error signal for reduce the computational operation in that process, the QE-MMA consider the this polarity and finite bit power-of-2 quantized component in that process, so they has different equalization performance. In order to comparing these performance, the computer simulation was performed in the same channel and environment, the output signal constellation of equalizer, residual isi and maximum distortion, MSE, SER were applied. As a result of computer simulation, the QE-MMA have more superior performance than the SE-MMA in every performance index.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.359-369
• /
• 2021

In underwater communications, to compensate performance degradation induced from rapidly changing channel transfer characteristic, multi-band communication method which allocate the same data to different frequency bands is used. However, the multi-band configuration may have worse performance than the single-band one because performance degradation in a particular band affects the output from the entire bands. This problem can be solved through a receiving end that analyzes error rates of each band, sets threshold values and allocates lower weights to inferior bands. Therefore, this paper proposed a weighting algorithm based on estimated Bit Error Rate (BER) which analyzes reliability of received data based on the performance difference between demodulated and decoded data. Employing turbo codes with coding rate of 1/3, we evaluate the performance of the proposed weighted multi-band transmission model in real underwater environments based on optimal simulation parameters. Through the sea trial experiment, we confirmed error performance was improved by applying the proposed weighting algorithm.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.37-42
• /
• 2019

In this paper, we propose a syndrome decoding scheme that can correct two errors for single error correcting Hamming codes within a code length. The decoding scheme proposed in this paper has the advantage of significantly improving the error rate performance compared to the decoder complexity by correcting multiple errors without substantially increasing the decoding complexity. It is suitable for applications in which the energy use of encoder/decoder is extremely limited and the low error rate performance is required, such as IoT communications and molecular communications. In order to verify the improvement of the error rate performance of the Hamming code with the proposed decoding scheme, we performed simulation on Hamming codes with short code length in the AWGN and BPSK modulation environments. As a result, compared with the conventional decoding method, the proposed decoding scheme showed performance improvement of about 1.1 ~ 1.2[dB] regardless of the code length of the Hamming code.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.67-72
• /
• 2021

This paper compare the adative equalization performance of the DSE-MMA (Dithered Signed-Error MMA) and QE-MMA (Quantized-Error MMA) which has a simplifies the computational operation of currently used MMA algorithm. The DSE-MMA possible to improve the rubustness to noise by using the dithered signal consider the polarity of error signal in the multiplication part. In QE-MMA, it use the polarity of error signal after performing the nonlinear power-of-two quantizing operation for easiness of H/W implementation. The same channel environment was applied, and it's performance of the output signal constellation, the residual isi and maximum distortion and MSE that means the convergence characteristics, the SER that means the robustness of external noise of algorithm were compared and evaluated. As a result of computer simulation, the QE-MMA has more good in constellation, residual isi, maximum distortion, MSE performanc than DSE-MMA. In SER, the DSE-MMA has more robust due to dither signal than QE-MMA.