• 제목/요약/키워드: Communication Structure

검색결과 4,663건 처리시간 0.028초

CMOS 구조를 이용한 DAC의 자체 테스트 기법에 관한 연구 (Built-In Self-Test of DAC using CMOS Structure)

  • 조성찬;김인수;민형복
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1862-1863
    • /
    • 2007
  • Testing the analog/mixed-signal circuitry of a mixed-signal IC has become a difficult task. Offset error, gain error, Non-monotonic behavior, Differential Non-linearity(DNL) error, Integral Non-linearity(INL) error are important specifications used as test parameters for DAC. In this paper, we propose an efficient BIST structure for DAC testing. The proposed BIST adds the circuit which uses the capacitor and op-amp, and accomplishes a test.

  • PDF

Performance Study of Defected Ground Structure Patch Antenna with Etched psi (ψ) Shaped Stubs

  • Nadeem, Iram;Choi, Dong-You
    • Journal of information and communication convergence engineering
    • /
    • 제16권4호
    • /
    • pp.203-212
    • /
    • 2018
  • In this article, a novel design of patch antenna with wide band characteristics is presented. The proposed antenna is having electrical dimensions of $0.14{\lambda}{\times}0.11{\lambda}$ (at lower initial frequency) and footprints of $150mm^2$. Structural parameters optimization shows 3.1-23.5 GHz frequency range for a (reflection coefficient) $S_{11}{\leq}-10dB$ and simulated gain 6.8 dB is obtained. An equivalent circuit model is proposed to get an insight view of antenna. Advanced Systems Design (ADS) simulation results are obtain which confirm the validity of proposed model. Degenerated foster canonical form has been used to explain the reactance and capacitive behavior idea of simulated proposed antenna's input impedance later on an equivalent circuit model and smith chart is also suggested. HFSS and CST have been used to analyze antenna behavior. The proposed antenna can be further used for microwave image detection applications.

대형전동커튼 타임제어 시스템 설계 및 개발 (Design and Development of Large Electric Curtain Control System for Time Controlled)

  • 정석;정용택;박상범
    • 한국기계가공학회지
    • /
    • 제18권3호
    • /
    • pp.1-6
    • /
    • 2019
  • The purpose of this paper is to design a curtain control system for centralized management of large curtains, which includes curtain structure, electric curtain controller, communication system, user interface and remote control. Curtain structure is designed to avoid using limit switch. The system is based on microprocessor, determined the stop position and complete running time of electric curtain through time control, and achieved remote control of curtain opening and closing through wired and wireless communication modes. By establishment of a mathematical model to calculate the inertia compensation time of the electric curtain, the electric curtain can be stopped ahead of time, and the curtain can be completely closed by the inertia. The result of test experiment of 32 electric curtain controllers shows the communication success rate reached 100%.

A Unit-Cell Varying Pattern Reconfigurable Zeroth-order Resonance Antenna

  • Hyeon-Cheol Ki
    • International journal of advanced smart convergence
    • /
    • 제13권2호
    • /
    • pp.1-6
    • /
    • 2024
  • Reconfiguration and miniaturization of antennas have become key attributes in modern wireless communication systems. Reconfiguration of radiation pattern can alleviate the problems encountered in modern wireless communication systems such as multi-path problems. Physical limitation of miniaturization also can be overcome by using a zeroth-order resonance (ZOR) antenna based on metamaterial. In order to achieve reconfiguration and miniaturization of antennas at the same time, we propose a new pattern reconfigurable zeroth-order resonance (ZOR) antenna that reconfigures the radiation patterns by varying the position and the number of unit cells comprising the antenna. The antenna is fabricated in an equilateral triangular shaped symmetrical structure to increase pattern variety. This structure can easily provide eight different radiation patterns (two omnidirectional and six monopole like patterns).

분석/합성 구조의 저 전송률 변환여기 광대역 음성/오디오 부호화기 설계 (Design of Low Bits Rate Transform Excitation Wide Band Speech and Audio Coder of Analysis-by-Synthesis Structure)

  • 장성훈;홍기봉;이인성
    • 한국음향학회지
    • /
    • 제31권7호
    • /
    • pp.472-479
    • /
    • 2012
  • 본 논문은 음성과 오디오의 혼합 콘텐츠를 대상으로 하는 9.2 kbps 저 전송률 변환여기 부호화기 설계를 목표로 한다. 저 전송률 환경을 위하여 주파수 영역 신호의 중요도에 따른 Band-Selection 방법과 Gain-Shape 양자화를 이용한 Analysis by Synthesis(AbS) 구조를 이용한다. AbS 구조를 이용하는 과정에서 발생하게 되는 연산량을 감소시키기 위하여 밴드별 IDFT를 취하고 합성하는 방법을 이용한다. 전송 되지 않는 구간에 대하여 Comfort Noise를 삽입함으로써 음질 저하 없이 설계한다. 기존의 TCX모드와 비교하여 저 전송률에서 성능의 저하 없는 부호화기를 제안한다.

밀리미터파 이미징을 위한 이중 곡률 렌즈의 설계 (Design of Dual Curved Lens for Millimeter-Wave Imaging)

  • 이원희;표성민
    • 한국인터넷방송통신학회논문지
    • /
    • 제16권6호
    • /
    • pp.239-242
    • /
    • 2016
  • 본 논문에서는 이중 곡률을 갖는 오목 렌즈를 제안하였다. 이중 곡률 렌즈는 HDPE (High Density Polyethylene)를 이용하여 제작하였다. 이중 곡률 렌즈는 두 개의 오목 구조로 구성되었다. 두 개의 오목 구조의 역할은 빔을 균일하게 넓게 보내기 위함이다. 작은 오목 구조는 큰 오목 구조 보다 더 큰 곡률 반경을 갖는다. 이러한 이중 곡률 렌즈는 밀리미터파 이미징 시스템에 적용 가능하다. 제작된 이중 곡률 렌즈를 250 GHz VDI 소스를 이용하여 검증하였다. 광학 시뮬레이션 툴인 ZEMAX를 이용하여 설계하고 제작된 렌즈는 균일한 빔과 확장 성능을 충분히 수행함을 확인하였다.

구조물 변형 모니터링을 위한 FBG센서 네트워크 시스템 구현 (Implementation of FBG Sensor Network System for Monitoring Structure Deformation)

  • 박장식;박근수
    • 한국전자통신학회논문지
    • /
    • 제9권8호
    • /
    • pp.841-846
    • /
    • 2014
  • FBG센서는 터널, 교량, 선박과 같은 구조물의 변형을 측정하고 활용된다. 본 논문은 구조물의 상태를 FBG센서를 이용하여 원격모니터링 하기 위한 광전변환시스템의 개발 구현에 관한 것이다. 개발한 광전변환시스템은 원격 모니터링을 위하여 유선과 무선통신 기능으로 각각 CAN과 Zigbee를 포함한다. 광전변환시스템은 광회절격자에 의하여 분광된 FBG센서의 반사광을 선형 이미지센서로 입사하여 파장의 변이를 FPGA를 이용하여 측정한다. FBG센서신호에 대한 처리와 원격모니터링을 위한 데이터 전송을 위하여 DSC(digital signal controller)를 이용한다. 개발한 광전변환시스템이 구조물 변형 측정에 효율적임을 실험을 통하여 확인하였다.

새로운 DIT Radix-4 FFT 구조 및 구현 (A New DIT Radix-4 FFT Structure and Implementation)

  • 장영범;이상우
    • 한국산학기술학회논문지
    • /
    • 제16권1호
    • /
    • pp.683-690
    • /
    • 2015
  • FFT(Fast Fourier Transform) 알고리즘에는 DIT(Decimation-In-Time)와 DIF(Decimation-In-Frequency)가 있다. DIF 알고리즘은 Radix-2/4/8 등의 다양한 종류와 그 구현 방법이 개발되어 사용되고 잇으나, DIT 알고리즘은 순차적인 출력을 낼 수 있는 장점이 있음에도 불구하고 다양한 알고리즘이 연구되지 못하였다. 이 논문에서는 새로운 DIT Radix-4 FFT의 나비연산기(butterfly) 구조를 제안하고 검증하였다. 제안 구조를 사용하여 64-point FFT 구조를 설계하고 Verilog로 코딩하여 구현함으로써 제안 구조의 효용성을 입증하였다. 48개의 곱셈기를 사용하여 합성하였으며 678만 게이트 수를 나타내었다. 따라서 제안된 DIT Radix-4 FFT 구조는 순차적인 FFT 출력을 필요로 하는 OFDM 통신용 SoC(System on a Chip)에 사용될 수 있을 것이다.

이공계 Technical Writing 기본과정 내용에 대한 고찰 (A Study on the Contents of a Basic Technical Writing Course for Engineering Students)

  • 조진호
    • 공학교육연구
    • /
    • 제15권5호
    • /
    • pp.131-139
    • /
    • 2012
  • This paper emphasizes writing education for engineering students should be communication driven writing education based on KEC2005. Communication driven writing for engineering students is essentially same as Technical Writing(TW) developed on the basis of ABET. Considering the current writing capability of engineering students and social need for various types of writing, TW education should be divided into two courses: basic and advanced. This paper deals with contents of a basic TW course in Myongji University, as a model case of a basic TW course for engineering students. It underlines various methods of prewriting that should be stressed and practiced in the TW class, because the prewriting step in the writing process determines the overall direction and structure of an essay. In particular, this paper introduces Power Writing(PW) which uses the structure of a paragraph as a means for providing building-blocks for the essay, employing logic, and ordering information arrangement in a paragraph. This paper also deals with important guidelines about sentence structure and word selection and proposes various applications of TW such as resume, interview, proposal, report, and presentation as a latter part of the basic course. Finally this paper highlights the etics of writing, such as plagiarism and the basic principles of quotation.

단말 간 직접 통신을 위한 효율적인 동기 프리앰블 설계 및 성능비교 (Design and Performance Comparison of Synchronization Preambles for Device-to-Device Communications)

  • 김종훈;성기영;정영호
    • 한국위성정보통신학회논문지
    • /
    • 제12권1호
    • /
    • pp.125-131
    • /
    • 2017
  • 본 논문에서는 이동통신, 무인기 통신, 차량 간 통신 등에 이용될 수 있는 효율적인 단말 간 직접통신 (D2D: device-to-device)을 위한 동기 프리앰블 (preamble) 구조를 제안하고 성능을 비교한다. 단말 간 직접 통신을 위해서는 향상된 주파수 및 시간 동기 요구 성능을 만족 시킬 수 있어야 하며, 본 논문에서는 이를 위한 프리앰블 구조를 제안한다. 주파수 영역에서 하나 걸러 하나씩의 부반송파에는 신호를 전송하지 않는 대신, 나머지 부반송파에서는 심볼 당 에너지를 2배로 전송하는 제안하는 구조가 기존 LTE D2D 프리앰블 구조에 비해 주파수 옵셋 추정 성능은 유지하면서도 시간 옵셋 추정 성능을 크게 향상시킴을 확인하였다.