• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3025-3027
• /
• 2000

본 논문에서는 변전소에서 수용가까지의 전력공급설비를 나타내는 도면인 배전설비도면의 주요 기호인 전주와 전선인식 방법에 관하여 기술한다 본 논문에서는 원형성에 근거하여 전주 후보를 추출한 후 이들 사이의 연결성에 근거하여 전선을 인식한 다음, 전주후보들 중에서 전주를 확인함으로써 전주와 전선을 인식하는 방법을 제안한다 제안된 방법은 다수의 배전 설비도면에 적용하여 실험하고 그 결과를 제시한다.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.651-654
• /
• 2010

In this paper, we propose two power randomization schemes for the random beamforming (RBF) based MIMO systems in cellular downlink. In the proposed system, a BS randomizes not only the pre-coding matrix but also the power allocation matrix, while the conventional RBF system allocates an equal power to each transmit stream. The proposed water-filling based power randomization scheme (Scheme-I) is proper in the low SNR values and the proposed random-power based randomization scheme (Scheme-II) is proper in the high SNR values. The proposed system with the power randomization outperforms the conventional RBF system which allocates the same power for each data stream.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.48-51
• /
• 2016

Many studies have been carried out in order to develop a frequency efficient communication system than the current communication system for satisfying the increasing demands of wireless data services in mobile communication systems. Service providers must maintain a lot of base station equipments to meet the increasing demands of wireless data service. Therefore service provider needs a system or method to reduce maintenance costs. The amount of wireless data service are changed according to the time of day, geographical location and so on. Power consumption can be reduced if the supplied power of communication systems is controlled by the amount of wireless data traffics. In this paper, power management system of base station's equipment for mobile communication is designed and implemented. The proposed power management system controls the power supplied to the mobile communication infrastructures depending on the service amount of wireless data. Field test result of the implemented system shows the proposed system saves 26% of the power consumption in the base stations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.413-420
• /
• 2020

The Tactical Information and Communication Network system provides real-time multimedia services such as voice and data by utilizing the Mobile Subscriber Access Point. At this time, an external transmission path is constructed through the Low Capacity Trunk Radio and the High Capacity Trunk Radio system. The communication devices of each wireless transmission system are mounted on a tactical vehicle and a secondary battery is used to prevent a power interruption when the supply power to the tactical vehicle is transferred to the integrated power control device. In this paper, the basic design of the Wireless Power Transfer device for charging the battery of the integrated power control system of the mobile base station system using the Loading Distribution Method and checking the number of primary windings and the core material selection by the air gap through the Finite Elements Method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.111-115
• /
• 2014

Power line communications can be utilized to build up the data transmission network wherever the electricity is available. This type of communication system could provide a basis for the network construction in many application areas which include the smart grid and home networks. On the other hand the power line communication is vulnerable to various types of interferences and noises. Also, its channel characteristics are constantly changing depending on the type and the amount of electrical loads connected to the network. Especially, the usage of DC power supply has been increased due to the explosive expansion of smart devices in our daily lives which result in the increased level of interferences on the power line channel. In this paper, the effect of the operation of the DC power supplies on the channel characteristics and the data transmission performance is analyzed through the experiments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2227-2235
• /
• 2009

This paper describes the system configuration and measured performances of a wireless power transmission system which utilizes microwave. The technically final target of this system is to provide DC power to various mobile terminals within limited spaces such as buildings, conference rooms, and so on. The prototype system is built using in-house designed and fabricated circuits such as microwave oscillator, high power amplifier, microstrip patch antenna, low pass filter, and detector/rectifier. The fixed RF power of 29.3dBm at 2.4GHz is produced from the high power amplifier and transmitted through the transmitting antenna, while the received RF power at the receiving antenna is transformed into DC power through the detector/rectifier. The measured change of DC voltage according to the distance between transmitting and receiving antenna is described.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.140-149
• /
• 2010

Green communication is a new paradigm of designing the communication system which considers not only the processing performance but also the energy efficiency. Power control management is one of the approaches in green communication to reduce the power consumption in distributed communication system. In this paper, we propose improved power control schemes for mobile satellite systems with ancillary terrestrial components (ATCs). In order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an efficient channel estimation method consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC). The OLPC works well if the forward and reverse links are perfectly correlated. The CLPC is sensitive to round-trip delay and, therefore, it is not effective in a mobile satellite system. In order to solve the above problem, we added monitoring equipment to both the OLPC and CLPC to use information about transmitting power that has not yet been received by the receiver over the satellite/ATC channel. Moreover, we adapted an efficient pilot diversity of both OLPC and CLPC in order to get a better signal to interference plus noise ratio estimation of the received signal.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2708-2710
• /
• 2001

한전에서는 판매업무의 혁신을 기하기 위하여 지리정보시스템(GIS)을 운영기반으로 하는 신배전정보시스템(NDIS : New Distribution Information System) 구축사업을 적극적으로 추진하여 현재 일부 지사 지점에서 시범운영중에 있으며, 향후 전국적인 운영확산이 예정되어 있다. NDIS에서는 국가기본도를 GIS의 기초도면으로 활용하고 있으나 DB구축시 기존 설비도면과의 상대위치오차가 발생되고, 설비가 누락 또는 오분류되어 있는 경우가 있어 이를 보정하는데 많은 노력이 드는 실정이다. 국가기본도 사용을 전제할 때 이러한 문제점은 피할 수 없는 현상이며, 한전에서는 이를 보다 효과적으로 해결하고자 배전설비에서 위치의 기준이 되는 전주를 중심으로 기초도면 변경에 따른 설비도면 보정기법연구와 시스템 개발을 수행하였다. 본고에서는 한전에서의 설비도 위치보정 적용환경과 함께 연구개발된 내용을 소개하고자 한다.

• Journal of Korea Multimedia Society
• /
• v.12 no.10
• /
• pp.1407-1417
• /
• 2009

Today is the Information age which Internet service acts a most important Information Source. So the Power Line Communication has been achieved to offer Internet service for Last-Mile area. And Research is achieved to frequence range from 30MHz to 80MHz for High-speed communication service. But, Power Line is not suitable for communication, So, electric wave is generated from flow of communication information. And the electric wave is interfered with Wireless Communication Service using the same frequence range. In this paper, a Notch Filter for reduce of interference between Power Line Communication and Wireless Communication Service is proposed. The proposed emulator is developed using TMS320C6416T DSP board of Texas Instruments.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.58-71
• /
• 2009

Today is the Information age which Internet service acts a most important Information Source. So A Power Line Communication has been achieved to offer Internet service for Last-Mile area. And Research is achieved to frequence range from 30MHz to 80MHz for High-speed communication service. But, Power Line is not suitable for communication, so, electric wave is generated from flow of communication information. And the electric wave is interfered with Wireless Communication Service using the same frequence range. In this paper, we calculated a 3 steps and 8 steps dynamic Notch Filter to consider the bandwidth of interference signals based on ETSI standard for reduce of interference between Power Line Communication and Wireless Communication Service. And we applied a Notch Filter and verified the application performance from Spectrum and BER.