• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.153-154
• /
• 2007

In this paper, we propose context information communication system using RF module to prevent railway cross accident. Since the communication module transmits to the train with high bit rate, OFDM(Orthogonal frequency division multiplexing) modulation method that distributes high speed data and transmits multiple times is applied. And image information is transmitted to the train's transceiver device by using ISM band (2.4GHz frequency band) that is proper to mobile communication. By using this system, we can deal with urgent situations at the railway cross and prevent railway cross accidents in advance.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.117-122
• /
• 2007

In this paper, we described a design and implementation of a sensor node for environmental monitoring. The main focus of design for sensor nodes is to isolate MCU for treating sensors from the RF module for considering various communication environment. The second is to make the interface between MCU and varity of sensor. In addition, we choose a narrow band communication module, cc1020, for the admittance of Korea government communication law. We also use a uC/OS-II as an operating system which is famous for 8bit MCUs. We showed that the communication performance is sufficient to use the communication module in a out-door environment through several experiments in that it is possible to transmit between 100m distance through experiments in a mountain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.708-713
• /
• 1997

A remote data communication system for monitoring of NC machine fault diagnosis and status is developed. This system communicates with host PC by using dial-up communication method on PSTN. The developed system consists of (1)remote communication module among NC's and host PC using PSTN, (2) 8 channels analog data sensing module, (3) digital I/O module for control of NC machine, (4) communication module between NC machine and remote data communication system using RS-232c, and (5) Software man-machine interface. This system may be applied for remote sensing of the status in Fms. To show the veridity of the developed system, several examples are illustrated.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.377-384
• /
• 2009

In this paper, leakage current sensing module of SoC(System on Chip)type and real time monitoring system under consideration of electromagnetic interface in power trunk line are developed. The first, leakage current sensing module of SoC type under consideration of electromagnetic interface is developed, and the developed sensing module of SoC type is composed of leakage sensing part, power supply part, interface part, communication part, AD(Alternating current to Direct current)convert part and amplification part. And also the electromagnetic compatibility is evaluated by conduction and radiation of EMI(Electromagnetic Interference) for developed sensing module. The developed system can have confidence, stability and do energy saving under mixed electric circumstance of the low voltage communication device and high voltage equipment. The second, the real time remote monitoring system is developed using designed wire and wireless communication module with leakage current sensing module of SoC type. The developed real time remote monitoring system can monitor sensing state, occurrence state of leakage current and alarm for each step etc.. And the device configuration, PCB layout for leakage current sensing module of system on chip type and the experiment configuration in consideration of EMI are presented. Also the measurement results of conduction and radiation for EMI are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.438-444
• /
• 2016

In this paper, A real-time channel module which can apply the wireless propagation channel was developed using USRP and Lab-VIEW. When the proposed channel module is used in conjunction with the implemented HW(hardware) simulators for cognitive radio and frequency interference analysis and so on, it can increase the reliability about wireless propagation environments. In addition, the proposed module overcomes the limit of existing HW simulator that data transfer rate is limitative in communication system through the design of the inner parts. Along with this, it is possible to apply channel parameters necessary to estimate the easier communication performance. Also, this has the advantage that it can be flexibly applied in implementing the communication channel with the upcoming new scenarios. The proposed module can estimate the communication performance via constellation and BER using the implemented module.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.51-56
• /
• 2013

In this paper, we had design the module of the LED-based media transmission mechanics visible light communication system. To implement the media transmission system through visible light communication transmitter, receiver module the using high brightness, we proposed visible light communication system to implement communication distance of up to a maximum transmitter-receiver distance using a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter. It was increased efficiency of approximately 20% by measuring the performance during lens wearing or not wearing on the LED module to improve the efficiency of the media transmission system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.9
• /
• pp.506-512
• /
• 2003

In this paper, a communication module between Relay agents in a multi-agent system based power distribution network protection system is realized using DNP3.0(Distributed Network Protocol), which is the standard communication protocol of distribution automation system in KEPCO. The key words for agent communication in the multi-agent based protection system are defined and represented by use of DNP application function code. The communication module developed based on the proposed communication scheme is tested by use of the Communication Test Harness, a test tool for DNP protocol, then used to the multi-agent system based power distribution net work protection system.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.65-70
• /
• 2023

In the paper, we propose a design method and process of a hybrid V2X communication module that combines WAVE communication, LTE-V2X communication, and legacy LTE communication in evaluating vehicle V2X electromagnetic compatibility. C-ITS is suitable for safety service applications due to its low latency, and legacy LTE is suitable for applications such as traffic information and infotainment due to its high latency and high capacity. In order to evaluate the V2X communication system, the evaluation equipment must have communication performance of the same level or higher. The main design contents presented in this paper will be applied to the implementation of a hybrid V2X communication module for electromagnetic compatibility evaluation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.103-110
• /
• 2013

WAVE system is a vehicle communication technology. The system provides the services to prevent vehicle accidents that might occur during driving. Also, it is used to provide various services such as monitoring vehicle management and system failure. In this paper, we divide module that manages WAVE MAC state into a WSMP base MLME module and IP base module and we design and implement a parameter environment between WME module to manage the state of the WAVE system and MLMEX module to mange IP base of WAVE MAC therefore the date to be processed.Also, in order to verify the validity, we have carried out experiments to compare the speed of data processing by dividing data of 5Mbyte, 10Mbyte, 20Mbyte into the packets of 2KByte and 4KByte. Therefore, in WAVE system, the Parameter environments and data processing speed between WME and MLMEX module can be utilized in the various service of vehicle communication technology depending on the speed of data processing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1513-1518
• /
• 2012

This paper is implemented media transmission system of VLC transmitter and receiver module using LED of White lighting that is based on PC module and to transmission technology for performance analysis. To realize LED visible light communication receiver is used 1~12 LED light-emitting device and transmitter is used a variable sensor. Developed initial distance of the tranceiver is more than 0~1m for LED VLC and the overall system transmission speed is achieved on variable having Visible light media transmission system. Composition to PC module with LED module and infrared sensor for performance analysis, predict and analyze the communication distance, check about the possibility of application methods. Measure each performance when the lens wearing and not wearing in order to increase the overall efficiency of the LED module, can know that increase efficiency of approximately 20%.