• 전자공학회논문지
• /
• 제53권9호
• /
• pp.54-61
• /
• 2016

본 논문에서는 6 Gbps 고속 double data rate(DDR) 인터페이스를 위한 기준 전압 발생기와 선형 등화기를 포함하는 단일 종단 수신기를 제안한다. 제안하는 단일 종단 수신기는 낮은 전압 레벨의 입력 신호에 대해 전압 이득을 증가시키기 위해 공통 게이트 증폭기를 사용한다. 저주파의 이득을 줄이고 고주파 피킹 이득을 발생시키는 연속 시간 선형 등화기가 공통 게이트 증폭기에서의 구현을 위해 제안된다. 또한, 공통 게이트 증폭기의 오프셋 노이즈를 줄임으로 전압이득을 극대화하기 위해 기준 전압 발생기가 구현된다. 제안하는 기준 전압 발생기는 디지털 평준화 기법에 의해 2.1 mV의 해상도로 제어된다. 제안된 단일 종단 수신기는 공급전압 1.2 V의 65 nm CMOS 공정에서 설계되었으며 6 Gbps의 동작속도에서 15 mW의 전력을 소모한다. 설계된 등화기는 저주파에서의 이득 대비 3 GHz 주파수에서의 피킹 이득을 5 dB 이상 증가시킨다.

• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.482-487
• /
• 2005

본 연구에서는 distributed amplifer를 구성하는 cascode 단위이득단의 공통게이트의 게이트 단자에 가변 커패시터를 연결함으로써 출력 저항 값을 조절하는 방법을 제안한다. Cascode 이득단은 공통 소스 이득단에 비해 높은 이득, 높은 출력저항, 부성저항을 제공하는 등 여러 장점이 있지만 설계시 사용한 트랜지스터 모델이 부정확하고 공정변수가 달라진다면 이득이 떨어지기 시작하는 band edge에서 발진할 위험이 있다. 그러므로 회로가 제작된 이후에도 발진을 막을 수 있는 조절회로가 필요하게 되는데, cascode단위 이득단의 공통 게이트 단자에 연결된 가변 커패시터가 그 역할을 할 수 있다. 제작한 distributed amplifier를 측정해본 결과 가변 커패시터를 조절함으로써 이득 특성을 변화시킬 수 있었으며, 이는 회로의 안정도를 보장할 수 있음을 알 수 있었다. 49GHz의 밴드폭내에서 이득은 $8.92\pm0.82 dB$이며, 군지연은 41GHz 이내에서 $\pm9.3 psec$ 범위 이내였다. 사용된 모든 transistor는 GaAs 기반의 $0.15{\mu}m$ 게이트 길이를 가지 는 p-HEMT이며, distributed amplifier는 총 4개의 이득단으로 구성되어 있다.

• 전자공학회논문지A
• /
• 제31A권2호
• /
• pp.125-134
• /
• 1994

This paper proposes a new top-down technology mapping algorithm for minimizing the chip area and the path delay time of lookup table-based field programmable gate array(FPGA). First, we present the decomposition and factoring algorithm using common subexpre ssion which minimizes the number of basic logic blocks and levels instead of the number of literals. Secondly, we propose a cube packing algorithm considering the decomposition of gates which exceed m-input lookup table. Previous approaches perform the cube packing and the gate decomposition independently, and it causes to increase the number of basic logic blocks. Lastly, the efficiency.

• 드라이브 ㆍ 컨트롤
• /
• 제12권4호
• /
• pp.15-20
• /
• 2015

Unlike a typical metal spring, a gas spring uses compressed gas contained in a cylinder and compressed by a piston to exert a force. A common application includes automobiles where gas spring are incorporated into the design of open struts that support the weight of tail gate. They are also used in furniture such as office chairs, and in medical and aerospace applications. The gas spring works by the application of pressurized gas (nitrogen) contained in a cylinder. The internal pressure of the gas spring greatly exceeds atmospheric pressure. This differential in pressure exists at any rod position and generates an outward force on the rod, making the gas spring extend. In this paper, we investigated the dynamic characteristics of a gas spring on an automotive tail gate system.

• 대한안전경영과학회지
• /
• 제6권4호
• /
• pp.215-226
• /
• 2004

This study develops a improved gate assignment algorithm and decision support system using its algorithm to extract a assignment result minimizing a walking distance of passengers in airport and maximizing the utilization rate of avaliable gates in domestic airports. By operation support system, it may contribute greatly in efficient enlargement of airport operation and increase the airport reliability through quickly coping with takeoff and landing delay of flight due to weather change, preservation and repair of gate, etc. Also, passengers who use airport terminal can minimize time and walking distance for departure, arrival, and transit, and it may greatly reduce the additional operation cost for common gates through maximizing the utilization rate for exclusive usage gates for airplanes which use gates.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.221-227
• /
• 2004

This study develops a improved gate assignment algorithm and decision support system using its algorithm to extract a assignment result minimizing a walking distance of passengers in airport and maximizing the utilization rate of avaliable gates in domestic airports. By operation support system, it may contribute greatly in efficient enlargement of airport operation and increase the airport reliability through quickly coping with takeoff and landing delay of flight due to weather change, preservation and repair of gate, etc. Also, passengers who use airport terminal can minimize time and walking distance for departure, arrival, and transit, and it may greatly reduce the additional operation cost for common gates through maximizing the utilization rate for exclusive usage gates for airplanes which use gates.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.27-36
• /
• 2014

The purpose of this study is to provide necessary information for the establishment of remodeling range needed first to support the future remodeling of rural housing. For this, this study examined landscape characteristics of rural housing such as an outer wall, a roof, a fence, and a gate which are main elements of forming the landscape of a rural village and rural residents' perception for remodeling. The results were as follows. The subject rural housing mostly had a timber structure and a masonry structure. Common roof types were a hip-and-gable roof and a gable roof. Frequent materials were a panel, a tile, and slate and common colors were primary colors such as reddish brown, black, and gray. A fence made of cement blocks and finished by a white paint was often found. A closed gate with iron frames was common. A standup kitchen and a flush toilet inside the house were common. The family members of rural residents were mostly two including a farmer husband and his wife. Elderly people of sixty and over were the most common. For residential environment satisfaction, a half of respondents were not unsatisfied with residential environment mostly due to an old house. Most respondents who were not satisfied with residential environment had high perception for the need of remodeling. The most commonly asked remodeling part was a roof, followed by a toilet, and an outer wall, indicating that the need of exterior remodeling was higher than that of interior remodeling. For a remodeling method, a total improvement was preferred. Although some rural village housing was improved by support of the government, local governments, or social groups, there are still many old houses. As this co-existence of improved houses and old houses hinders the landscape of rural village, it is necessary to give a support. But rural residents' requests should be first actively reflected to establish a guideline of supporting rural house remodeling.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.369-372
• /
• 1999

In this paper, we propose a new method for power estimation in nodes of multi-level combinational circuits and describe its application to the extraction of common expressions for low power design. It is assumed that each node is implemented as a complex gate and the capacitance and the switching activity of the nodes are considered in the power estimation. Extracting common expressions which is accomplished mostly by the extraction of kernels, can be transformed to the problem of rectangle covering. We describe how the newly proposed estimation method can be applied to the rectangle covering problem and show the experimental results with comparisons to the results of SIS-1.2.

• 한국실내디자인학회논문집
• /
• 제17권5호
• /
• pp.72-79
• /
• 2008

Nagaya is one of the traditional Japanese housing types in which multiple houses are attached together. In Nagaya, walls are shared by several houses but entrances are privately owned by houses. Nagaya consists of many wooden houses for common people located in parallel with narrow alleys between them. Nagaya was one of the representative housing types in Japanese architectural history. This research is to study the background of the origination of Nagaya in Japan, the characteristics of space and land planning, the features and causes of the changes in the space and land planning. In this research, we observed and analyzed unit plans of a block of gate-type Nagayas in Hanan, Osaka. The results are as follows. First, as the inner alleys(Roji) are closed, the number of entrances to each housing lot decreased from two to one since one entrance that used to be open to inner alleys(Roji) are permanently closed. Second, walls between streets and housing lots which used to be one of the outstanding characteristics of gate-type Nagayas are disappearing. Third, as the bathrooms are added to houses, the front gardens are being degraded to empty spaces or sometimes totally removed. Fourth, the space in the first floor of houses become family spaces, and that in the second floor is divided into private rooms for individuals.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2070-2078
• /
• 2014

In this work, the frequency response of gate-all-around (GAA) Ge/GaAs heterojunction tunneling field-effect transistor (TFET) with hetero-gate-dielectric (HGD) and pnpn channel doping profile has been analysed by technology computer-aided design (TCAD) device-circuit mixed-mode simulations, with comparison studies among ppn, pnpn, and HGD pnpn TFET devices. By recursive tracing of voltage transfer curves (VTCs) of a common-source (CS) amplifier based on the HGD pnpn TFET, the operation point (Q-point) was obtained at $V_{DS}=1V$, where the maximum available output swing was acquired without waveform distortion. The slope of VTC of the amplifier was 9.21 V/V (19.4 dB), which mainly resulted from the ponderable direct-current (DC) characteristics of HGD pnpn TFET. Along with the DC performances, frequency response with a small-signal voltage of 10 mV has been closely investigated in terms of voltage gain ($A_v$), unit-gain frequency ($f_{unity}$), and cut-off frequency ($f_T$). The Ge/GaAs HGD pnpn TFET demonstrated $A_v=19.4dB$, $f_{unity}=10THz$, $f_T=0.487$ THz and $f_{max}=18THz$.