• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.265-274
• /
• 2015

International organizations and classification societies established rules and regulations to which shipbuilders and ship operators should comply during design, construction, even operation keeping from hazard to life of crews and ocean environment. Hence, rules and regulations could be guidelines for design and construction of ship sometimes. In practical wise, ship structure designers be predisposed to design lightest and easy-to-product structures which satisfy rules and regulations. Therefore, changes of rules and regulations are remarkably important issue to related industries. In 2006, IACS established and released Common Structural Rules for Bulk Carrier and Common Structural Rules for Double Hull Oil Tanker. These CSRs are consolidated and unified rules of class society's rules. But these two rules are different from each other. IACS has plan to release unified rule of two ship type called Harmonized Common Structural Rule for Bulk Carriers and Oil Tankers. This new rule will be effective from July 2015. Hence, bulk carrier and double hull oil tanker whose contract date is on and thereafter July 2015 should be complied with CSR-H. Therefore, it is highly important to be aware of consequences and cause of consequences with respect to CSR-H. The object of this research is to compare requirements of structure scantling in way of midship area for selected target ship according to CSRs and CSR-H and to analysis cause of deviation between two rules.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.117-126
• /
• 2011

The buckling assessment of plate panels described in common structural rules (CSR) is to be determined according to the buckling utilization factor with hull girder stresses calculated on net hull girder sectional properties. As the thickness requirement for the buckling assessment of plate panels is not explicitly given in CSR, a lot of time is spent to find the proper thickness of plate panels until reaching to an allowable buckling utilization factor. In this study, in order to reduce time and cost, the thickness requirement of plate panels satisfying buckling assessment was derived. The structural design system included with the thickness requirement for buckling assessment was developed. The system is called as Oil-tanker Automated Structural Investigation System (OASIS). The design result of longitudinal strength members using OASIS was verified by Nauticus Hull which is the rule scantling software of DNV. Finally, optimum design of a double hull tanker for the minimum weight using OASIS was presented.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.73-79
• /
• 2017

IACS enacted Harmonized CSR(CSR-H) to meet the IMO GBS applied from 1 July 2016. CSR-H is clearly complement and integrate than present CSR-BC & CSR-OT. One of the biggest issue in new rule is structural analysis. In CSR-H, structural analysis must carried out entire each cargo area including the aft bulkhead of the aftermost cargo hold and the collision bulkhead. Accordingly, new load and boundary conditions are present, an additional structural reinforcement is required by the structural analysis result for each cargo hold. In this study, we applied CSR-H to existing 158K DWT CLASS CRUDE OIL TANKER in order to compare and analyze the hull changes. It is useful for the application of the CSR-H to the similar vessel and helpful in finding the optimized structural design.

• 해양환경안전학회지
• /
• 제28권7호
• /
• pp.1259-1266
• /
• 2022

최근, 구조설계 기준 및 평가방법의 전문화로 인하여, 선급 규칙의 통합화가 이뤄졌었다. 그 좋은 일례가 국제공통규칙(CSR, Common Structural Rule)이다. 그러나, 종강도 하중이 크게 작용하는 화물창 구역에만 국한하여 세부규정이 제시되어 있고, 선수와 선미부 구조에는 별다른 평가 지침이 없다. 언급한 구역의 구조설계는 조선사의 설계 경험에 의존하여 진행하고 있으며, 선급에서도 명확한 기준이 없으므로 구조 손상 문제가 발생하더라도 근본적인 원인을 파악하기가 힘들다. 본 연구에서는 선미부에 주로 발생하고 있는 좌굴 손상의 대표적인 사례에 대한 근본적인 원인을 파악하기 위한 엔지니어링 기반의 해법을 제시하였다. 유한요소해석 모델링 기반 구조 강도 검증을 위하여, 하중 조건, 경계조건, 모델링 방법 그리고 평가 기준에 대한 합리적인 해법을 제시하였다. 선미부에 작용하는 휨 모멘트에 의하여 높이 방향으로 압축하중에 의해서 좌굴이 발생할 가능성이 있으며, 좌굴 강성 증가를 위하여 판 두께 증가 혹은 수직 보강재의 추가가 필요하다. 앞으로도 이 결과는 유사 운반선의 선미부 구조 강도 검토 시 도움을 줄 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.507-530
• /
• 2012

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.1-7
• /
• 2013

In past decades, a maximum standard vessel size for chemical tankers is not normally larger than 55,000 TDW due to the characteristic of chemical product shipment which is so variable but small quantity unlike single product carries such as crude oil tankers. These days, as demand of very large chemical tanker is rising due to the change of market trend of chemical product shipment, 75,000 TDW class chemical tanker has been developed. The newly developed vessel's structure has been designed based on CSR (Common Structural Rule) for double hull oil tankers (hereafter CSR) published by IACS (International Association of Classification Societies). However, due to the large difference from typical oil tankers, many items should be specially considered such as on deck transverse and corrugated bulkheads. In addition, two longitudinal bulkheads without upper stool have been constructed in order to maximise the number of cargo tanks and the volume of each cargo tanks. In this study, key word of the vessel has been briefly reviewed and the structural reliability of the proposed vessel has been investigated.

• 한국CDE학회논문집
• /
• 제21권2호
• /
• pp.186-195
• /
• 2016

The finite element modeling of a ship for hull structural analysis on the basis of new harmonized common structural rules (CSR-H) is to be extended to the cargo holds in fore and after body of a ship. Unlike the parallel middle-body where the external and internal features of hull are equal along to the longitudinal direction of a ship, in fore and after body, the external and internal features of hull vary linearly or even irregularly in forms of a surface or a curve along to the longitudinal direction of a ship. Thus, it needs lots of design man-hours for the modeling for structural analysis. In order to save man-hours in initial structural design phase of a ship, the specified 3D CAD system has been adopted in shipbuilding industry. Through the interface between CAD and CAE (rule scantling and direct strength assessment), design man-hour in initial design phase can be saved even under the environment of CSR-H.

• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.31-42
• /
• 2009

Common structural rule (CSR) doesn' t provide any other specific regulations for permanent means of access (PMA) platform structure in a cargo oil tank. The PMA platform is recommended to comply with scantling requirement of local support member. However, it leads to too conservative scantlings compared with actual loads imposed on the platform. This paper proposes a strength assessment procedure for the PMA structure based on a nonlinear ultimate strength. The ultimate strength is evaluated in a sufficiently conservative way. The first linear buckling mode is used as an initial imperfection shape and its magnitude is determined using the definitions of DNV PULS. Since the same imperfection mode as the failure mode of the ultimate limit state is assumed, it can accelerate the failure. Au ultimate strength capacity curve obtained from a series of nonlinear FE analysis is compared with actual stresses calculated by CSR cargo hold analysis.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.26-31
• /
• 2007

After CSR is in effect, a matter of concern is how many to increase in terms of weight due to apply it to the ship and what difference it is comparing between existing rule and CSR rule. The concepts of CSR are to make the ship safer, more robust. and the design requirement clearer. Furthermore it pursues longer life of ship in fatigue strength. By reasons of those, most of requirements are stronger than before. Therefore many part of ship should be reinforced and the weight of ship can be increased. Under those circumstances, the builder should make an effort to define the CSR and to find the methods to manage well this situation. In this study, we performed 3D Cargo hold and Fine-mesh F.E analysis and deduced a conclusion and introduced new detail design.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.340-350
• /
• 2006

This paper is concerned with a practical guide for the ultimate longitudinal strength assessments of ships' hull structure. Rigorous non-linear structural analysis for three tanker models has been carried out to examine the ultimate strength behavior. Formula of estimating the ultimate longitudinal strength has been proposed which is modified with the results of non-linear finite element analysis of hull girders. Computational reliability and accuracy of the large-scale non-linear finite element analysis and the proposed simplified formula are verified through comparing their results with that of 1/3 scale frigate model test and DNVs program. Additionally, the ultimate longitudinal strength for ten tanker models is compared with those by the method specified in the 2nd Draft of common structural rule for tankers, which is being developed by IACS.