• 한국분무공학회지
• /
• 제20권1호
• /
• pp.14-19
• /
• 2015

Recently, R&D demand for environmental friendly vehicle has rapidly increased due to its global environmental issues such as global warming, energy and economic crisis. Under this situation, the most realistic alternative way for environmental friendly vehicle is a clean diesel vehicle. The common-rail fuel injection system, as key technology of clean diesel vehicle, consists of a high pressure pump, common-rail, high pressure fuel line and electronic control injector. In common-rail high-pressure fuel injection system, high pressure wave of injection system and geometry of injector elements have a major effects on high-pressure fuel spray. Therefore, in this study, the numerical model was developed for analysis about the common-rail fuel pressure pulsation by using AMESim code. We could secure stability of common-rail high-pressure fuel injection system through optimal design of fuel line.

• 한국주조공학회지
• /
• 제21권5호
• /
• pp.290-295
• /
• 2001

We fabricated test samples containing various shape elements and surface roughness checking points for the jewelry cast master patterns by employing the 3D computer aided design (CAD), selective laser sintering (SLS) rapid prototype (RP) with the DuraForm powders. We varied the alignment angle from $0^{\circ}$ to $10^{\circ}$ at a given layer thickness of 0.08 and 0.1mm, respectively, in RP operation. Dimensions of the shape elements as well as values of surface roughness are characterized by an optical microscope and a contact-scanning profilometer. Surface roughness values of the top and vertical face increased as the alignment angle increased, while the other roughness values and shape elements variation were not depending on the alignment angle. The resolution of the shape realization was enhanced as the layer thickness became smaller. The minimum diameter of the hole, common in jewelry design, was 1.2 mm, and the shrinkage became 12% at the 1.6 mm-diameter hole, Our results implied that we face down the proposed design elements with $0^{\circ}$ alignment angle, and consider the shrinkage effect of each shape element in DuraForm RP jewelry modeling.

• 한국실내디자인학회논문집
• /
• 제19권6호
• /
• pp.249-256
• /
• 2010

For guaranteeing for security of nuclear power plant, ergonomic factors have been applied to design of main control room, core area for management and control of nuclear power plant, but design elements for performance of operators have been ignored. As the behaviors of operators are important for security of nuclear power plant, space design which makes them pleasant psychologically and makes them maintain attention on security equipments ceaselessly is required. Therefore, the purpose of this study is to analyze space characteristics of main control rooms according to regulations of nuclear power plant and general guidelines of space design, and to offer basic data for designing of main control room which makes operators pleasant psychologically and physically. At first, theoretical issues related with design of main control room are reviewed and several premises of space are developed by abstracting design elements from common space and regulations of nuclear power plant and, then integrating each design elements interactively. In short, the improvement of system environment based on human-machine interface space has brought about perceptual, cognitive, and spatial changes and has realized next generation of main control rooms. And, differences and similarities between ordinary space and main control room, which ergonomic sizes and regulations are applied and is VDT environment based on LDP, are discussed in relation to 13 design elements and 17 space premise.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.562-565
• /
• 2000

A data registry is a physical place to keep characteristics of classes of objects exist in the real world when they are chosen to record as data. It provides a centralized directory to describe the meaning, representation, and identification of data elements and their values. It assists to prevent redundancy and to preserve common understanding about the data described in a metadata set. In this paper, we investigate and classify various components of IBS(Intelligent Building Systems), specially HVAC in Building Automation Systems. We present IBSDR(Intelligent Building Systems Data Registry) model that specifies not only the detailed information on data elements but also the process of documenting data in IBS. It functions as the medium to create the data sharing environment to maintain exact meaning of data for every data elements so that database management designers or related users can create and exchange their DB without major modification. It also serves as a clearinghouse for information about IBS data. So all users can freely retrieve from and register data elements to IBSDR based on ISO/IEC 11179 through World Wide Web.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권3호
• /
• pp.1469-1472
• /
• 2016

Cancer pathology reports play an important role in choice of patient care. They provide crucial information concerning diagnosis, therapy options, and prognosis. Professional pathology institutions, such as the College of American Pathologists (CAP), have developed checklists to ensure the presence of all the required elements in reports. In this study, 438 surgical pathology reports of patients with breast (148), colon (147), and stomach cancer (143) were evaluated with respect to the presence of mandated elements according to CAP checklists. The most common missing element in all the three types of cancer was 'staging' (73.6, 53.1, and 56.6% in breast, colon, and stomach cancer reports missed 'staging', respectively). The second most missing element was 'tumor site' in breast (64.2%) and stomach cancer (30.1%), and 'procedure' in colon cancer (29.3%). 'Perineural invasion' was the third most missing element in the three types of cancer (25.7, 17.0, and 22.4% in breast, colon, and stomach cancer, respectively). Only 11.4% of reports included all key elements required by CAP. The use of checklists was associated with higher rate of completeness. This study demonstrates that the key elements requiring the information on the requisition forms from the clinicians are commonly missed, leading to ambiguity.

• 복식문화연구
• /
• 제9권6호
• /
• pp.855-871
• /
• 2001

The purposes of this study were to compare the marketing compose elements of Apgujung and Shinchon branch of Hyundai Department Store and to suggest desirable fashion marketing strategies for other Department Stores and retailing stores. The results were as follows: Two kinds of factor were classified form this study; one was Hardware elements such as Trading Area Site, Store Composition, Scale, and Subsidiary facilities etc., another was Software elements like Store Concept, Image, and Merchandising and so on. The followings were suggested from Hardware elements; 1) Trading Area could be classified'local type'and 'spread type'. 2) Each branch was differentiated from store formation of conventional department store which had food department in basement. There were the most powerful women's fashion brand to lead costumers in second basement. 3) In accordance with the position of subsidiary facilities of Hyundai Department Store,'Water Jet Effect'strategy and'Show Effect'strategy could be usefully applied for other Department Stores and retailing stores. 4) The strategy of approaching easily to the target floor which was located in lower floor, could be applied to various retailing stores. The followings were suggested from Software elements; 1) Stores management coping with poles-apart in costumer could be needed to other Department Store and retailing stores. 2) It also could be needed to find and maintain effective ratio between common brand and differentiated brands in the other Department Stores.

• 한국기록관리학회지
• /
• 제19권3호
• /
• pp.71-96
• /
• 2019

북한인권기록은 가해자 처벌 및 피해자 보상의 목적으로 수집되며, 다양한 기관에서 생성되는 만큼 체계적이고 통합적인 관리가 필요하다. 따라서 본 연구에서는 북한인권기록을 위한 메타데이터를 제안하는 것을 목적으로 두고 있다. 국내외 3개 기관과 2개의 인권기록 소프트웨어를 분석하여 인권기록 관리를 위한 공통요소와 필요 요소를 도출하였으며, 부족한 부분은 UN의 가이드라인을 참고하였다. 메타데이터는 총 15개의 상위요소와 그에 따른 하위요소로 구성하였다. 제안된 상위요소는 각각 13개의 필수요소와 2개의 해당요소로 구성하였다.

• 디지털융복합연구
• /
• 제4권1호
• /
• pp.17-30
• /
• 2006

Recently, Modeling and Simulation, which have been received attention in various in dustries such as national defence, eduction and entertainment, have been researched, and related applications have been developed actively. Especially, it is focused on the to chnology of a virtual reality and a virtual simulation which represents the implementation technology for the simulation education related to the e-Learning industry. However, a solution is needed to fulfill the lack of technology and research about standardize d data elements which could be applied to virtual simulation technologies in common. Therefore, this article suggests the virtual simulation data elements to increase the educational effect of a virtual simulation and interoperability of data among LMS through reference to korean and international standards and the result of related area analysis. In other words, this article aims to define the expression of data element and to propose the guideline elements in the virtual simulation scope.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 추계학술발표대회 논문집
• /
• pp.189-192
• /
• 2006

Nowadays great changes arises from the digital environment and technology. And Also, our living environment are changes very rapidly. The purpose of this study was to analyze the characteristics and trends of future housing reference to ubiquitous housing cases in U.S.A, Japan and Korea. From these cases, reorganized ubiquitous-apartment elements are suitable to our housing environment. To search them, it is investigated to 4 ubiquitous housing examples, such as Aware Home, Toyota's PAPI, samsung raemian's housing gallery and GS E&C's apartment. In this study, we could get types and characteristics and planning elements of ubiquitous housings. The findings showed that many kinds of common network systems were suggested and were acted in limited spaces. In conclusion, it was considered as the one of the most suitable future housing type that had a special feature of the demands of residence and life with free accessibility of information and data. Especially, it is necessary to prepare for coming aging society.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.736-740
• /
• 2007

It is not always convenient to consider isotropic meshes where the edge length depends on the orientation of the edge. It is desirable to go for anisotropic mesh strategy instead. There are many instances where the solution shows directional features such as great variations along certain directions with less significant changes along other ones. Anisotropic meshes considered to be worthy in these cases. By using anisotropic elements we can resolve the solution accurately with few elements. Many techniques have been used as a common feature that the shape, size and orientation of the triangle elements are controlled by specifying metric tensor. This paper attempts at clear understanding of the estimation and equidistribution of the error and discusses the parameters like reliability and effectivity of an anisotropic mesh in a mathematical manner. Also we study some of applications of anisotropic mesh.