• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.562-566
• /
• 2007

In apartment house renovation project, the project progress held up in perception gap or conflict of interest with residents as usual. These dispute occurs ambiguous borderline ordistinction of Common Useing) Parts and Exclusive Possessed Private Parts. The Maintenance Covenant now in force in Korea and Japan are considered in this paper about theses item. Summarizing the conclusion is as below. 1) In The Maintenance Covenantnow in force, in definition of Ownership, Utilization, Maintenance, Japan is more ostensive than Korea. 2) The Borderline of Common Using Parts with Exclusive Possessed Parts is [Inner line of Exterior Wall] in Korea and in Japan also. But in Korea it is not in unity in purpose and action or definition and description. 3) In Japan, the Subject of Ownership is defined with hierarchically, as Housing complex-residential Building-individual dwelling, But not in Korea. 4) In Japan, [Exclusively using Common Owned Parts] are defined, But not in Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.644-650
• /
• 2001

A remotely located synchronization system which is locked to the remote master clock has been implemented by using GPS Common-View technique. The measurement results showed that the accuracy of the remote synchronization system could be kept within a few parts in $10^{-12}$ and MTIE(Maximum Time Interval Error) met the ITU-T Recommendation(G.811). A prototype system having fully automatic operational functions has been realized up to now and is expected to be used in the network synchronization in the near future.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1023-1033
• /
• 2014

In this paper, performance improved hole-filling algorithm which includes the boundary noise removing pre-process that can be used for an arbitrary virtual view synthesis has been proposed. Boundary noise occurs due to the boundary mismatch between depth and texture images during the 3D warping process and it usually causes unusual defects in a generated virtual view. Common-hole is impossible to recover by using only a given original view as a reference and most of the conventional algorithms generate unnatural views that include constrained parts of the texture. To remove the boundary noise, we first find occlusion regions and expand these regions to the common-hole region in the synthesized view. Then, we fill the common-hole using the spiral weighted average algorithm and the gradient searching algorithm. The spiral weighted average algorithm keeps the boundary of each object well by using depth information and the gradient searching algorithm preserves the details. We tried to combine strong points of both the spiral weighted average algorithm and the gradient searching algorithm. We also tried to reduce the flickering defect that exists around the filled common-hole region by using a probability mask. The experimental results show that the proposed algorithm performs much better than the conventional algorithms.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.176-179
• /
• 2005

In this paper, we propose the new method that separate the existing common VQ code book into two parts, one is the common VQ code book which is the half of existing common VQ code book, another is the personal speaker VQ code book which accommodate the personal speaker characteristic, variation to improve the performance of the text-dependent speaker verification system using discrete HMM. We apply the propose method m this paper to the text-dependent speaker verification system using discrete HMM and have the improvement performance of about 0.24% compared to existing method

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.25-34
• /
• 1999

In spite of the advance of 3D solid modeling technology, there are some distinct areas where 2D CAD S/W are still dominant, and more competent comparing with 3D CAD S/W. For example, in the manufacturing of 2D-shaped electrical parts, most related manufacturing tools have 2D geometric features by nature, and 3D solid models applied to these parts have substantial overheads. Nevertheless, most 2D CAD S/W have no topological inquiry services because they have no such information on their geometrical database inherently. Thus, it is needed to extract such information from 2D CAD database for developing more advanced application such as automated drafting/design S/W. In this paper, the extraction of topological information from 2D CAD has been performed in general way using concept of B-rep. A general extraction algorithm, data structure and meta file format for 2D topological object have been developed and successfully applied to the development of the automated lead frame die design system in Samsung Aerospace. it is also possible to provide a flexible, powerful topology-oriented functionality on any common 2D CAD S/W.

• Journal of the Korean association of regional geographers
• /
• v.7 no.3
• /
• pp.29-43
• /
• 2001

This paper examined characteristics of folk houses related to climate in Cheju island using climate data, documents and field survey data. Precipitation and humidity affect characteristics of folk houses in the southern parts of the island during summer while in winter, northern parts are mainly affected by wind. Chuck-gub has been shown through all over Cheju island due to the characteristics of precipitation. Jaechangmoon exists in southern parts of the island and these parts are experienced high humidity in summer The double-row room houses, the low eaves, gentle slop roof and stone wall are distributed through Cheju island and is related to wind. The double door is common in the northern parts because of strong winter monsoon, and Yimoonkan exists in the coastal area of the northern parts. Outer wall, Pung-Che and Gorangche are affected by winter monsoon and abundant precipitation. Gorangche has shown through both the northern parts and southeastern parts. Folk houses in the southern parts are more open than in northern parts. Folk houses in the northern parts are divided into the coastal type and the piedmont type. In the southern parts, they are subdivided the eastern type and the western type by the appearance of Gorangche.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.4
• /
• pp.28-40
• /
• 2005

This paper focuses on a BOM(Bill of Materials) management problem for a small and medium manufacturing company that produce automobile parts. Automobile part's manufacturers produce various products due to various automobile characteristics such as types, colors, and the other options of car. These products are classified into product groups with common parts. And each product group is regarded as a product family. This paper proposes an efficient and effective EXCEL-based BOM management scheme using characteristics of the product family. And we have implemented the practical EXCEL-based BOM management system for real small and medium automobile part's manufacturing companies.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.59-67
• /
• 1999

The lead time for new products is very limited in the current manufacturing processes, therefore the Rapid Prototyping process has been introduced and generally used in the industry. Fused Deposition Manufacturing (FDM) is one of the most common methods in this field. In the FDM process, the patterns are made of Wax of ABS and ABS shows better quality of the patterns. To date, the FDM/ABS patterns are used in investment casting for making silicon moulds to produce was patterns because it is very difficult to dewax FDM/ABS directly. The aim of this paper was to propose a feasibility of using FDM/ABS parts as wax-pattern substitutes in the investment casting process. The effects of casting conditions, such as pre-heat temperature and casting temperature, are provided. Comparisons with the conventional investment casting processes using the wax-patterns under the same prototype are made. Lead-time and saving cost are discussed in using FDM/ABS parts as was-pattern substitutes compared with the products from other rapid prototype systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.227-230
• /
• 2002

New polishing technique for small parts has been tried out using the principle of particle electromechanics. Common fine abrasives such as alumina, diamond, silicon carbide are dielectric materials which are polarized under an electric field, and a non-uniform electric field makes abrasive particles translate along the field line. Using this principle, We make abrasive particles aggregate in the vicinity of the micro tool which is fir the surface finishing of a small part without contact with it. The behavior of particles is optically measured, and the machined depth of glass is examined.

• International Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.85-94
• /
• 2005

The purpose of this study is to analyze the preference of spatial elements for common space planning in senior congregate housing. For the study, 500 potential consumer's residing in Seoul was surveyed using the questionnaire in the social survey methodology. As for the common spaces, gardens, treatment, and exercise rooms were preferred. A combination of both separate and group arrangement of the buildings was preferred, indicating that people wanted separation of the common space and the individual living units. Second, people preferred sharing parts of the common space with their neighbors and as is the traditional custom, preferred to take off their shoes at the entrance to individual units. Third, for the furniture and facilities, they wanted the manager room in the lobby, the small meeting rooms in the public dining room, a fitness center in the activity room, the rack or alcove to store items in front of an individuals unit in the hallway, a chair to sit down in the elevator, and the chair to rest on the stairway landing. Fourth, in terms of priority for planning the senior citizens' community housing, safety, familiarity like a regular home, reduced isolation and loneliness, sense of belonging, economic factors, aesthetic appreciation, daily life supplement, variety, and self-identity were answered in that order.