• 대한의용생체공학회:의공학회지
• /
• 제29권6호
• /
• pp.484-492
• /
• 2008

Sit to stand(STS) movement is one of the most common activity in daily life. In addition, Korean traditionally stand up from various sitting heights in one's daily life compared to other foreigners. As Korea enter rapidly to the aging society, needs of the elderly's independent life are increasing. Therefore the importance of research about the analysis of elderly's activity in daily life is rapidly increasing. In this study, we analyzed joint movements and changes of muscle length during STS(sit-to-stand) at various sitting heights(table seat, bath seat, bottom) in the Korean elderly's daily life by using the motion analysis and musculoskeletal modeling. Ten Korean elderly and young were participated in this experiment. Three heights of sitting posture which could represent typical sitting in Korean daily life were chosen as table seat(42cm), bath seat(21cm) and bottom(0cm). As the results, the elderly showed both smaller knee/hip flexion and larger trunk flexion relatively in comparison to the young during table seat STS. The elderly also showed larger dorsiflexion and smaller ROM of knee, hip, trunk compared to the young during bath seat STS. Additionally, the elderly showed larger plantarflexion, hip flexion, smaller knee flexion and trunk flexion during the first half of bottom STS and larger knee flexion, hip flexion and trunk flexion during the second half of bottom STS. In addition, we could know contraction and relaxation characters of major muscles in lower limb during various STS through the analysis of changes in muscle length by musculoskeltal modeling.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1999년도 봄 학술발표회 논문집
• /
• pp.300-304
• /
• 1999

A study is strength analysis of a filtering structure for a viscoelastic flowing substance. Conventional segment type filter units comprise an assembly of two or more individual disc segments stacked at their respective hubs on a central common filtrate collection tube within a filter housing. The conventional type's leaf disc is problem that it don't support a high pressure flows. Therefore, this study develope new structure filtering model to stand a high pressure flows.

• 한국항해학회지
• /
• 제6권1호
• /
• pp.19-39
• /
• 1982

There may be a lor of studies on the economic design of ship for the most favorable combination of design basis on the owner's request. However, there are few on the economical ship's size and speed for the ship owner's stand point. This paper describes on the optimal ship's size and speed to the given marine commercial environments for the owner's requirement to the shipyard. As the result of the paper, the criterion curve of bulk carrier will also be used to assess existing ships for their profitability.

• 한국임상수의학회지
• /
• 제4권1호
• /
• pp.433-438
• /
• 1987

A cheap, simple, and exact method for the preparation of handmade blowgun was studied. The blowgun-dart-adhesive -stand made of plastic syringe shaft was simple and convenient to make a blowgun dart accuratly. The needle end sealing method with wire-lead(solder) made the needle good to secure and simple to make. Because of easy exchangeability, the tail-piece made of yarn and a rivet is able to use permanently. And the materials of this blowgun were inexpensive, common and easily obtainable. This blowgun dart had various capacity up to 12ml.

• 대한물리치료과학회지
• /
• 제18권1호
• /
• pp.33-49
• /
• 2011

The process of physical therapy uses a problem-solving approach to enhance a patients's functioning status. The International Classification of Functioning, Disability and Health(ICF) is the common concept for the functioning in the world. Physical therapists require the ability to identify problems, formulate hypothesis, and plan intervention strategies through clinical reasoning. In the clinical process, physical therapists need to use standard and common languages in speech and in documentation. The purpose of this study was to suggest the process of making strategy for efficient intervention, examining and evaluating the functional problem of the person with stroke using ICF tools. For the first step in this process model, therapists could list the information relating to functional problems used by the ICF Core set and then could identify the interaction among the problems using the ICF assessment sheet. For the next step, therapist is needed to make the hypothesis and hypothesis testing, and then set a primary functional goals and therapeutic goals in detail after prioritizing the problems to be managed based on the problem list. Finally, after setting the identified problems as the purpose of intervention through the hypothesis testing, therapist could do some intervention after making a plan to solve these problems, and find out the outcomes using the ICF evaluation display. This report illustrates how to apply the process based on ICF concept into physical therapy practice. Making a decision for the most efficient intervention requires that therapists use the clinical reasoning process based on ICF concept.

• 항공우주시스템공학회지
• /
• 제1권4호
• /
• pp.37-41
• /
• 2007

Labyrinth seal is most common way to protect the bearings installed in Reaction wheel. In spite of wide applications, no such research was found about the sealing utility of the Labyrinth seal in the condition of vacuum and high temperature. In this research, we tried to verify the utility of Labyrinth seal. Numerical analysis had been executed to predict the benefit of the Labyrinth seal and also experiments were performed to verify the utilization. Two Bearings were installed at the vacuum chamber, one was assembled with Labyrinth seal and the other was stand alone. After executing the vacuum test, it was found to be the stand alone bearing had lost more weight than the one that was assembled with the labyrinth seal. In this result, it is verified that the Labyrinth seal has useful function to preserve the lubricant that affects to the life-cycle of the Bearing.

• 한국산림과학회지
• /
• 제99권3호
• /
• pp.312-322
• /
• 2010

한국에서 비자나무는 남해안 및 제주도의 온난 기후대에 주로 분포하고 있으며, 사찰과 향교 주변 등에서 주로 보호림으로 조성되어 오고 있다. 본 연구의 주된 목적은 한반도의 대표적 비자나무 임분에서 식생구조분석을 실시함으로서 현재 비자나무 식생군락의 동태를 파악하고 이로부터 적절한 임분 보전대책을 수립하는데 있다. 비자나무 임분 내에서 조사된 종수는 총 148종이었으며, 교목층 임분에서 출현수종 28종, 아교목층 출현수종 38종, 그리고 관목층 출현수종 82종의 목본 관속식물이 생육하고 있는 것으로 나타났다. 조사된 비자나무 임분에서 공통적으로 나타난 종은 쥐똥나무, 송악 및 마삭줄이었다. 조사지역 모든 층위에서 비자나무가 우점종 이었으나, 아교목층 및 관목층에서는 그 우점치가 다소 떨어져 임분 쇠퇴현상이 나타났는데, 이러한 사실은 교목층 임분의 수관발달 및 아교목층에서의 생장편의에 의한 결과이다. 비자나무림의 교목층과 아교목층은 천연발아에 의해 조성된 임분이 대부분이다. 따라서 조사된 우리나라 비자나무림에 대한 건강한 임분을 유도하기 위해서는 도태 간벌시업을 응용함으로서 과도한 수관경쟁의 조정이 필요할 것으로 판단되는 바이다.

• 한국분무공학회지
• /
• 제18권1호
• /
• pp.55-60
• /
• 2013

In this study, injection flow rates and material of the solenoid sealing of the injectors were improved for the development of a di-methyl Ether(DME) common-rail system. To deliver the same amount of energy provided by injection pressure of diesel $P_{inj}$ = 160 MPa, the DME injectors need to have larger diameter of nozzle hole and more No. of hole at low injection pressure of $P_{inj}$ = 40~50 MPa. The simplified nozzle flow model, which takes account of nozzle geometry and injection condition, was employed in order to design the concept of a injector nozzle such as No. of hole, diameter of hole and diameter of needle seat, etc. Injection amount and rate were tested by diesel and DME test stand. As a result, the diameter of nozzle hole were enlarged by 0.25 mm. The diameter of the orifice in the high pressure line was increased by 1.0 mm to maintain hydraulic force in the nozzle. The material of the solenoid sealing was changed to HNBR, which was strong against the corrosive. Experimental results showed that the injection amount of the DME injector drastically increased by 191.9% comparison to that of diesel at $P_{inj}$ = 40 MPa.

• 한국식생활문화학회지
• /
• 제28권4호
• /
• pp.356-370
• /
• 2013

The purpose of this study is to examine the Western perspective on the food and food culture of Modern Times in Korea (from the late of Joseon Dynasty until Japanese colonial era). Literature and written records were analyzed. This analysis revealed that the heart of the mill in this period involved rice, and that a common beverage was sungnyung made from boiled scorched rice (in contrast to tea as the common beverage in Japan or China). The most important subsidiary food in Joseon was vegetables, especially Kimchi. Westerners viewed Kimchi as a smell symbolizing Joseon and their meal times. Even though both Kimchi and cheese are fermented food, just like Westerners could not stand the smell of Kimchi, Koreans viewed the smell of cheese unpleasant. Westerners viewed German sauerkraut as Western food counterpart to Kimchi, as sauerkraut is also fermented food made of cabbage. Regarding the eating of dog meat in Joseon, most Westerners viewed it as brutal; however some interpreted it as a difference in food culture. In addition, the eating of raw fish and its intestines felt crude to Westerners. The biggest difference between Joseon's food and Western food was that Joseon had no dairy products and no sugar. The most highly preferred fruit for Westerners was the persimmon, and ginseng was already widely recognized and recorded as a medicinal plant. Joseon's desserts were also favorably evaluated. In contrast, the excessive gluttony, heavy drinking, and unsanitary conditions in Joseon were problems pointed out in many records.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.171-177
• /
• 2004

Many instrumentations have been used to acquire the performance data of military systems fer many years. But they could not satisfy environmental specifications(vibration, shock, temperature) and processing speed to apply for the performance test of military systems because of having developed as common vehicles/fixed installation equipments. Thus a new rugged embedded measurement system is required to process large data in high processing speed(Maximum sample rate:1.25Mhz/ch) with rugged environmental specifications. We have developed embedded measurement systems by using PXI(PCI extension for Instrumentation)bus interface composed of a stand alone controller and versatile data acquisition boards(analog, digital, vision, temperature and small signal conditioner) on PC-based environment to solve these problems. Operation programs have been developed using Lab_View and the performances have been validated experimentally.