• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1101-1110
• /
• 1998

Computational investigation was conducted to examine the performance of a high pressure common-rail fuel injection system which is used to power a passenger car direct injection (Dl) diesel engine. The pipe flows were modeled by one dimensional wave equation and solved by implicit FDM Each volume of injector was considered as chambers with orifice nozzle in connections. These simulation results were compared with the experimental data of Ganser Hydromag. The comparison of needle life and rate of injection between simulation data and experimental data showed quite a good agreement Different shape of injection rate can be made by adjusting the size of inlet orifice and exit orifice in the piston chamber The pilot injection was accomplished by adjusting command signal.

• Communications for Statistical Applications and Methods
• /
• 제17권5호
• /
• pp.679-688
• /
• 2010

Lee (2010) developed a confidence interval for the difference of binomial proportions in two doubly sampled data subject to false-positive errors. The confidence interval seems to be adequate for a general double sampling model subject to false-positive misclassification. However, in many applications, the false-positive error rates could be the same. On this note, the construction of asymptotic confidence interval is considered when the false-positive error rates are common. The coverage behaviors of nine likelihood based confidence intervals are examined. It is shown that the confidence interval based Rao score with the expected information has good performance in terms of coverage probability and expected width.

• 혜화의학회지
• /
• 제18권2호
• /
• pp.105-111
• /
• 2009

Melasma is a common disorder that causes dark colored patches. It generally causes brown spots on the face, especially on the forehead, cheeks, and upper lips. The pattern of patches has bilateral symmetry in yellowish-brown to gray-brown colors. It is much more common in women than in men. Melasma is considered to be caused by environmental and physical constitutional factors and often occurs when a woman's hormone changes by pregnancy or the use of oral contraceptive pills. It is important to combine oriental medicine and Sasang constitutional medicine for treatment of Melasma. Normal treatment of Melasma includes warming oneself, removal of the emotional stress factors, and good nutrition.

• 대한두경부종양학회지
• /
• 제12권1호
• /
• pp.52-57
• /
• 1996

Since the upper lip does not receive direct actinic radiation, only 5% of lip tumors develop in the upper lip, while the lower lip is the site of the remainder. Among the lower lip cancer, squamous cell carcinoma is the most common tumor, especially the vermillion border of lower lip is the most common site. The aims of reconstruction of the lip are both aesthetic effect and functional restoration and the ideal procedure must produce a aesthetically normal, not-tao-tight lip and a good sensation and muscle tone of the lip. We have a satisfactory reconstruction of a subtotal loss of lower lip after squamous cell carcinoma extirpation using Gillies fan flap and the case is presented with reviewing a many published reports.

• Journal of Korean Neurosurgical Society
• /
• 제41권3호
• /
• pp.193-195
• /
• 2007

Middle cerebral artery [MCA] aneurysms are a common source of subarachnoid hemorrhage [SAH]. But, ruptured distal MCA aneurysm is very rare, and their clinical and radiological features are poorly understood. Microsurgical repair remains the most common method used to treat distal MCA aneurysm, even though endovascular coiling has been favored recently. We report our experience of successful coiling for ruptured distal MCA aneurysm, In selected patients, coiling may be a good treatment option for ruptured distal MCA aneurysm.

• Journal of Yeungnam Medical Science
• /
• 제30권2호
• /
• pp.124-127
• /
• 2013

Talus fracture is less common than most fractures, and bilateral talar neck fracture is extremely rare. Complications associated with talus fractures are generally deemed common because of the anatomical characteristics of the talus, but few reports have described the methods of treating such complications and the results of bilateral talar neck fracture. We report here a case of bilateral Hawkins type II talar neck fracture that had good clinical results without complications after early surgical treatment.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.89-98
• /
• 2014

Platform-based product family design is recognized as an effective method to satisfy the mass customization which is a current market trend. In order to design platform-based product family successfully, it is the key work to define a good product platform, which is to identify the common modules that will be shared among the product family. In this paper the clustering analysis using dendrogram is proposed to capture the common modules of the platform. The clustering variables regarding both marketing and engineering sides are derived from the view point of top-down product development. A case study of a cordless drill/drive product family is presented to illustrate the feasibility and validity of the overall procedure developed in this research.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.76-82
• /
• 2000

In this study, three-dimensional heat flow in laser beam welding for deep penetration was analyzed by using F.E.M common code, and then the results were compared with the experimental data. The models for analysis are full penetration welds and are made at three different laser powers (6, 9.9, 4.5 kW) with two different welding speeds (5.8mm/s, 5mm/s). The characteristics of thermal absorption by the workpiece during deep penetration laser welding can be represented by a combination of line heat source through the workpiece and distributed heat source at the top surface due to the plasma plume above the top surface. This gives an insight into the way in which the beam interacts with the material being welded. The analyses performed with the combined heat source models show comparatively good agreement between the experimental and calculated melt temperature isotherm, i.e, the fusion zone boundary. The results are used to explain the "nail head" appearance of fusion zone, which is quite common in laser beam welds.eam welds.

• 한국식품영양학회지
• /
• 제3권1호
• /
• pp.13-22
• /
• 1990

Nangmyun-broth was collected as samples from 25 common restaurants in Bucheon to examine it's sanitary condition. The main course of bacterial contamination was persuited for it's sanitary improvement. Bacterial count in summer sample was not greatly different from that in winter, resulting in total count 1.7$\times$10i1m1, lactic acid bacteria 8.7$\times$106/ml, coliform group 1 2$\times$105/ml, Staphylococcus aureus 6.5$\times$102/ml. Bacterial contamination occurred remarkably with the use of storage barrel in which remnent Nangmyun-broth was still resting, because the remnant Nangmyun-broth contained high level of bacteria Good santary condition in Nangmyun-broth was obtained by the use of clean barrel which had been washed with tap water or sterilizied with steam before filling fresh Nangmyun -broth for cold storage. The growth of Escherichia coli and Staphylococcus aureus was inhibited in the presence of acetic acid(0.01~0.05%) or mustart(0.1~0.5%)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1923-1929
• /
• 2003

The present study investigated the microcirculation of blood in the left common artery (LCCA). In order to develop a mathematical model for microcirculation in LCCA, the present study adopted preexisted set of measured morphological data on anatomy, mechanical properties of the coronary vessels, viscosity of blood, the basic laws of physics, and the appropriate boundary conditions. In this study, the statistical distribution of blood pressure, blood flow, and blood volume in the LCCA were determined based on the anatomical branching pattern of the coronary arterial tree and the statistical data of blood vessel dimensions. Our calculations were in good agreement with the previous studies. The present results showed that the mean longitudinal pressure drop profile was function of the vessel order numbers. It was found that the normalized pressure drop was a logarithmic function of the compliance.