• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.74-80
• /
• 2006

1980년대부터 민간에 개방된 GPS는 C/A코드의 도달시간을 측정하여 위치를 계산하고, 반송파의 도플러 주파수를 측정하여 속도를 계산한다. 위치정확도를 향상시키기 위하여 공통오차를 제거하는 DGPS 기법과 반송파 위상을 이용하여 수cm 내의 정확도를 가질 수 있는 CDGPS 기법이 1990년대부터 개발되기 시작하였다. 본 논문에서는 CDGPS를 위해 LSAST 미지정수 추정기법을 개선하여 계산효율 및 신뢰도를 높이고, 단일 주파수 GPS 수신기를 이용하여 움직이는 항체의 상대위치를 수cm 내의 정확도로 측정한 실험결과를 INS의 위치와 비교하여 제시한다. 이러한 결과는 추후 정밀관성항법장치, 무인자율주행, 측지 및 정밀지도제작 등에 유용하게 쓰일 수 있다.

• Structural Engineering and Mechanics
• /
• 제46권5호
• /
• pp.629-644
• /
• 2013

This paper concerns about the raking damages on the ultimate residual hull girder strength of bulk carriers by applying the modified R-D diagram (advanced method). The limited raking damage scenarios, based on the IMO's probability density function of grounding accidents, were carried out by using sampling technique. Recently, innovative method for the evaluation of the structural condition assessment, which covers the residual strength and damage index diagram (R-D diagram), was proposed by Paik et al. (2012). This concept is applied in the present study and modified R-D diagram, which can be considered vessel size effect, is then proposed. Four different types of bulk carrier structures, i.e., Handysize (37K), Supramax (57K), Kamsarmax (82K) and Capesize (181K) by Common Structural Rule (CSR), were applied to draw the general tendency. The ALPS/HULL, intelligent supersize finite element method, was employed for the ultimate longitudinal strength analysis. The obtained empirical formulas will be useful for the condition assessment of bulk carrier structures. It can also cover different sizes of the bulk carriers in terms of ultimate longitudinal strength. Important insights and findings with useful guidelines developed in this study are summarized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.170-173
• /
• 2007

Cruciform conjugated molecule, 4(DP3T)-benzene bearing terthiophene moieties has been synthesized through Horner-Emmons Reaction using 5-dodecyl-5"-aldehyde-[2,2';5',2"] terthiophene as dendrons and octaethyl benzene- 1,2,4,5-tetrayltetrakis(methylene)tetraphosphonate as the core unit; this molecule has been fully characterized. The terthiophene-based molecule exhibits good solubility in common organic solvents and good self-film forming property. They are intrinsically crystalline as they exhibit well-defined X-ray diffraction patterns from uniform orientations of molecules. Thus, intermolecular interaction can be enhanced to affect the carrier transport phenomena after annealing at $148^{\circ}C$. The semiconducting property of 4(DP3T)-benzene have been evaluated in organic field-effect transistors. 4(DP3T)-benzene exhibit carrier mobility as high as $(6.6{\pm}0.5)$ ${\times}$ $10^{-6}cm^2V^{-1}s^{-1}$.

• International Journal of Computer Science & Network Security
• /
• 제23권5호
• /
• pp.121-127
• /
• 2023

A 500 km/h linear motor high speed terrestrial transportation service is planned to launch 2027 in Japan. In order to support 5G service in the train, the Sub-carrier spacing frequency of 30 kHz is planned to be used instead of common 15 kHz sub-carrier spacing to mitigate Doppler effect in such high-speed transportation. In addition, to increase the cell size of 5G mobile system, plural Base Station antenna will transmit the identical Down Link (DL) signal to form the expanded cell size along the train rail. In this situation, forward and backward antenna signals will be Doppler shifted by reverse direction respectively and the receiver in the train might suffer to estimate accurate Channel Transfer Function (CTF) for its demodulation. In this paper, Delay and Doppler Profiler (DDP) based Channel Estimator is proposed and it is successfully implemented in signal processing simulation system. Then the simulated performances are compared with the conventional Time domain linear interpolated estimator. According to the simulation results, QPSK modulation can be used even under severe channel condition such as 500 km/h, 2 path reverse Doppler Shift condition, although QPSK modulation can be used less than 200 km/h with conventional Channel estimator.

• 한국음향학회지
• /
• 제33권4호
• /
• pp.255-261
• /
• 2014

본 논문에서는 수중음향통신에서 비선형 chirp 변조 신호를 사용하는 방법을 제안한다. 과거 대부분의 수중음향통신에서는 반송파의 크기, 주파수 또는 위상에 정보를 실었다. 이에 반해 제안된 방법은 심볼 내에서 반송파의 주파수 변화율에 정보를 포함하게 된다. 특히, 반송파로 비선형 chirp 신호의 일종인 하이퍼볼릭 주파수 변조 신호를 사용하는 경우, 도플러 채널에서 강한 특성을 가진다. 제안된 방법은 시뮬레이션을 통해 기존 방법과 비교 및 분석하였다. 제안된 방식과 선형 주파수 변조 신호를 갖는 기존 방식을 비교하였을 때 도플러 편이가 있는 경우 제안된 방법의 오차 확률이 평균 5~12 % 감소하는 것을 확인할 수 있었다. 또한 제안된 방법의 성능을 분석하기 위해 해상실험이 수행되었다.

• 한국전자파학회논문지
• /
• 제16권3호
• /
• pp.319-326
• /
• 2005

고속 데이터 전송을 목표로 하는 다중 반송파 시스템인 OFDM통신 시스템에서는 송수신단의 발진기에서 발생하는 위상잡음이 인접 채널간 간섭(ICI: Inter-sub-carrier-interference)을 야기시켜 통신성능에 악영향을 끼친다. 본 논문에서는 ICI 영향을 효과적으로 줄일 수 있는 새로운 data-conjugate 형식의 ICI 제거방법을 제안하고, 위상잡음 선형 근사화 기법을 이용하여 위상잡음에 의해 발생하는 CPE(common phase error), ICI 그리고 CIR(carrier to interference ratio)를 분석한다. 그리고 원래의 OFDM, 기존의 data-conversion 형식의 ICI 제거방법 과 비교하였을 때의 위상잡음에 의한 성능 개선 효과를 분석한다. 결과적으로 ICI 제거방법을 사용하였을 때 성능개선 효과를 얻을 수 있으며, 종전에 연구된 data-conversion 형식의 ICI 제거방법보다 본 연구에서 제안한 data-conjugate 형식의 ICI 제거방법을 사용하였을 때 더 좋은 통신 성능을 얻을 수 있다.

• 한국전자파학회논문지
• /
• 제16권10호
• /
• pp.1043-1049
• /
• 2005

대용량 고속 광대역 전송에 적합한 OFDM(Orthogonal Frequency-Division Multiplexing) 통신 시스템에서 위상 잡음에 의해 발생하는 ICI(Inter-Sub-Carrier-Interference)는 부반송파 사이의 직교성을 깨뜨려 시스템 성능을 현저히 저하시킨다. 본 논문에서는 ICI 제거 기 법과 안테나, 시간, 주파수 다이버시티를 혼합한 새로운 STFBC(Space Time Frequency Block Coding) 방법을 이용하여 ICI를 효과적으로 제거한다. 먼저 위상잡음 선형 근사화 기법을 이용하여 제안한 STFBC OFDM 시스템에서 발생하는 CPE(Common Phase Error) 성분과 ICI 성분을 분석하고 PLL(Phase Locked Loop) 위상잡음에 의해 발생하는 시스템 성능 저하를 비교 분석하기 위하여 CIR(Carrier to Interference Ratio), PICR(Peak Interference to Carrier power Ratio) 그리고 BER(Bit Error Rate)을 토론한다. 분석 결과 제안한 STFBC 방법에서는 ICI를 뚜렷이 제거할 뿐만 아니라 기존의 STBC(Space Time Block Coding), SFBC(Space Frequency Block Coding) 등 다이버시티 코딩 기법에서 나타나는 SCI(Self Channel Interference)를 효과적으로 피면할 수 있다.

• Journal of Genetic Medicine
• /
• 제11권2호
• /
• pp.63-68
• /
• 2014

Purpose: The mutation of the SLC26A4 gene is the second most common cause of congenital hearing loss after GJB2 mutations. It has been identified as a major cause of autosomal recessive nonsyndromic hearing loss associated with enlarged vestibular aqueduct and Pendred syndrome. Although most studies of SLC26A4 mutations have dealt with hearing-impaired patients, there are a few reports on the frequency of these mutations in the general population. The purpose of this study was to evaluate the prevalence of SLC26A4 mutations that cause inherited deafness in the general Korean population. Materials and Methods: We obtained blood samples from 144 Korean individuals with normal hearing. The samples were subjected to polymerase chain reaction to amplify the entire coding region of the SLC26A4 gene, followed by direct DNA sequencing. Results: Sequencing analysis of this gene identified 5 different variants (c.147C>G, c.225G>C, c.1723A>G, c.2168A>G, and c.2283A>G). The pathogenic mutation c.2168A>G (p.H723R) was identified in 1.39% (2/144) of the subjects with normal hearing. Conclusion: These data provide information about carrier frequency for SLC26A4 mutation-associated hearing loss and have important implications for genetic diagnostic testing for inherited deafness in the Korean population.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.352-359
• /
• 2017

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.917-924
• /
• 2019

This paper presents a wideband low noise amplifier (LNA) that is suitable for LTE-Advanced and 5G communication standards employing carrier aggregation (CA). The proposed LNA encompasses a common input stage and a dual output second stage with a buffer at each distinct output. This architecture is targeted to operate in both intra-band (contiguous and non-contiguous) and inter-band CA. In the proposed design, the input and second stages employ a gm enhancement with resistive feedback technique to achieve self-biasing, enhanced gain, wide bandwidth as well as reduced noise figure of the proposed LNA. An up/down power controller controls the single input single out (SISO) and single input multiple outputs (SIMO) modes of operation for inter-band and intra-band operations. The proposed LNA is designed with a 45nm CMOS technology. For SISO mode of operation, the LNA operates from 0.52GHz to 4.29GHz with a maximum power gain of 17.77dB, 2.88dB minimum noise figure and input (output) matching performance better than -10dB. For SIMO mode of operation, the proposed LNA operates from 0.52GHz to 4.44GHz with a maximum voltage gain of 18.30dB, a minimum noise figure of 2.82dB with equally good matching performance. An $IIP_3$ value of -6.7dBm is achieved in both SISO and SIMO operations. with a maximum current of 42mA consumed (LNA+buffer in SIMO operation) from a 1.2V supply.