• 제목/요약/키워드: Commercial vehicles

검색결과 479건 처리시간 0.023초

안전운전 관리시스템 개발 (Development of a Safe Driving Management System)

  • 조준희;이운성
    • 한국자동차공학회논문집
    • /
    • 제15권1호
    • /
    • pp.71-77
    • /
    • 2007
  • Dangerous driving is a major cause of traffic accidents in Korea. It becomes more serious for commercial vehicles due to higher fatality rates. The Safe Driving Management System (SDMS), developed in this research, is a comprehensive solution that monitors and stores driving conditions of vehicles, detects dangerous driving situations, and analyzes the results in real time. The Safe Driving Management System consists of a vehicle movement information controller, a dangerous driving detection algorithm and a vehicle movement data report and analysis program. The dangerous driving detection algorithm detects and classifies dangerous driving conditions into representative cases such as sudden acceleration, sudden braking, sudden lane change, and sudden turning. Both computer simulation and vehicle test have been conducted to develop and verify the algorithm. The Safe Driving Management System has been implemented on commercial buses to verify its reliability and objectivity. It is expected that the system can contribute to prevention of traffic accidents, systemization of safe driving management and reduction of commercial vehicle operation costs.

공기 저항력 저감을 위한 복합재 페어링 구조 설계 및 해석 연구 (A Study on Structural Design and Analysis of Composite Fairing to Reduce Air Resistance)

  • 이용규;박현범
    • 항공우주시스템공학회지
    • /
    • 제16권6호
    • /
    • pp.64-73
    • /
    • 2022
  • 페어링은 상용차가 주행 시 전면부에서 발생하는 유동박리의 저항을 제어하여 상용차 공기 저항력을 감소시키는 장치이다. 본 연구에서는 랭킨 반체 이론을 적용하여 3D페어링 형상을 설계하고 공력 해석을 통해 설계 결과를 검증하였다. 그리고 페어링의 구조적 안전성을 위해 상용차 과속조건과 돌풍 조건을 함께 고려하여 공력하중을 도출하였다. 이러한 공력 해석 결과를 기반으로 유리섬유/에폭시 복합재료를 적용하여 안전계수 3을 만족하는 페어링 구조 설계를 수행하였다. 최종 본 연구에서 가장 경량화된 페어링의 구조 해석을 수행하여 구조 안전성이 확인되었다.

전기철도 전원계통에서의 화재사고 사례 분석 (Analysis of Fire Accident on Power Line for DC Electric Traction Vehicles)

  • 송재용;조영진;남정우;김진표;박남규
    • 한국안전학회지
    • /
    • 제25권2호
    • /
    • pp.18-23
    • /
    • 2010
  • This paper describes a cause of fire accidents on power system fire DC electric traction vehicles. We investigated fire scene of power line for DC electric traction vehicles. From analysis results, the cause of fire on power line turned out line to ground fault between a feeder of electric power services(pantagraph) and DC electric traction vehicle roof. Fire accident of DC electric traction vehicles be assumed that electric sparks had been produced between the pantagraph and the power line conductor by repetitively making contact and separation, maybe if some material like branches get in between connecting rod it makes progress line to ground fault. ZnO arresters are widely used to protect DC electric traction vehicles against overvoltages caused by lightning or switching surges. However, the arresters are deteriorated by commercial overvoltages and/or lightning one. The deteriorated arresters could lead power failures, such as line to ground fault by a thermal runaway resulting from the increases in leakage current even in a nominal power system voltage. Finally, the power failures would be causative of the fire accident.

철도차량용 액슬 스프링의 유한요소 해석 (Finite Element Analysis of the Axle Spring for Railway Vehicles)

  • 우창수;권재도
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1999년도 춘계학술대회 논문집
    • /
    • pp.124-131
    • /
    • 1999
  • The axle spring is used in primary suspension component of railway vehicles. The most important factor of axle spring is to have adequate spring constant for comfortable feeling of ride. The non-linear properties of rubber which were important parameter to evaluate of rubber components, were determined by the characteristic test. The finite element analysis of the axle spring are executed to predict the behavior of deformation and stiffness by using commercial FEA code.

  • PDF

도로 위계에 따른 화물차량 용량과 허용비율을 고려한 화물 통행망 구축방안 연구 (Freight Network Build-up Based on Capacity and Acceptable Limits of Commercial Vehicles by Road Type)

  • 채찬들;오세창;이강대
    • 대한교통학회지
    • /
    • 제24권1호
    • /
    • pp.7-18
    • /
    • 2006
  • 오늘날 도시 지역의 화물차량의 통행은 통행의 제한이나 관리활동의 부재의 이유로 도로혼잡 문제화 환경 및 도로파손의 사회비용 증가의 문제점을 증가시키고 있다. 이러한 문제의 해결을 위해 본 연구에서는 도시 내 화물차량의 효율적인 관리를 위한 화물통행망 구축방안을 제안하고자 한다. 본 논문을 통해 제안된 화물 통행망 구축방안은 죤 들의 화물차량 유출입 통행량의 차이에 따라 나타나는 교차통행량을 수용할 수 있는 간선망을 배정하는 방법을 이용하였고, 간선의 기능을 수행하는 도로의 위계별로 나타나는 용량차이를 고려하기 위하여, 도로를 '도로용량편람'의 용량산정을 위한 분류방식을 적용하여 고속도로, 다차로 도로, 도시 및 교외 간선도로로 구분하였으며, 요구되는 차로수 별 통행 가능한 화물차량의 통행수를 산정하였다. 이때, 차로수 별 화물차량 통행량은 도시 계획자의 목적에 따라 적용 가능하도록 교통류 중 화물차량의 유입 허용비율에 따라 각각 산정하였다 최종적으로 개발된 화물통행망 구축방안을 서울시를 대상으로 적용해봄으로써 실질적인 효용과 적용 가능성을 확인하였다.

상업용 공기정화기 사용 차량 내 휘발성 유기물질 수준 (Volatile Organic Compound Levels inside Vehicles using Commercial Air Cleaning Devices)

  • Wan-Kuen Jo;Kun-Ho Park
    • 한국환경과학회지
    • /
    • 제6권6호
    • /
    • pp.659-670
    • /
    • 1997
  • 차량 내부의 높은 휘발성 유기물질 농도와 이들 휘발성 유기물질의 독성 때문에 휘발성 유기물 질에 대한 차량 내부에서의 노출이 주요한 관심을 받고 있다. 본 연구에서는 115회의 도시 지역 (대구 광역시) 출퇴근과 9회의 정차 실험을 통해 상업용 공기정화기의 6 종류 휘발성 유기물질에 대한 제거 효율이 평가되었다. 네 종류의 운전 조건에서 수행된 정차 및 출퇴근 연구 결과, 본 연구에서 이용된 두 개의 시중 시판 차량용 공기정화기는 휘발성 유기물질에 대해 제거 효율이 없는 것으로 나타났다. 벤젠을 제외한 다섯 종류의 휘발성 유기물질의 농도는 최근 차량보다 오래된 차량 내부에서 높게 나타났다 (p<0.05). 본 연구에서 측정된 벤젠과 톨루엔의 평균 농도는 로스앤젤레스에서 측정된 값과 유사하게 나타났고, 그 이외의 미국내 비교지역의 측정 값보다는 높게 나타났다. 휘발성 유기물질에 대한 노출 및 해당 발암 위해성은 차량 내부에서 실외 공기의 약 8배 정도 높게, 그리고 실내 공기의 약 절반 정도로 산정 되었다.

  • PDF

250 km/h급 전철설비의 비전기반 검측 기술 구현 (An Implement of Vision based Measurement Technology for Traction Power System up to 250 km/h)

  • 박영식;나경민;박영
    • 전기학회논문지
    • /
    • 제67권7호
    • /
    • pp.976-980
    • /
    • 2018
  • The traction power system is configured to transmit electricity to the vehicles through mechanical contact between the OCL (Overhead Contact Line) and the pantograph. The system measures the current collection performance of the OCL, or the OCL installation condition is examined through maintenance for commercial operation. Maintenance continues to check the conditions through visual inspection by walking and inspection vehicles. The current collection performance is divided into the percentage of arcing(%), the contact force, and the uplift. The percentage of arcing is composed of a vision based system and used to verify the performance of a new OCL. However, it is not always possible to measure the current collection performance during commercial operation, and maintenance based on human resources can not be replaced. This paper presents the minimum performance condition of video devices in the current collection system of commercial vehicles. In addition, a continuous arcing was measured, and current collection performance was examined on the traction power system at the 250 km/h. It was analyzed with a minimum duration of arc of 1 ms. The frame rate is then shown by comparing the number of frames in the image at the time intervals of the number of the arcing. It is expected that the result of this study can be used for examining the minimum performance of video devices depending on their purpose.

사업용 차량 기반 도로위험정보 제공의 상용화를 위한 통합 평가 (Integrated Assessment for Commercialization of Road Hazardous Information Colleted by Commercial Vehicles)

  • 유경수;정경민;채찬들
    • 한국ITS학회 논문지
    • /
    • 제20권2호
    • /
    • pp.30-42
    • /
    • 2021
  • 전국 고속도로의 포트홀 발생으로 인한 보상금액과 건수는 2015년 대비 2019년에 각각 약 4.2배, 3.5배 수준으로 증가하고 있으며, 이러한 도로 위 위험요소들로 인한 피해 증가로 국토교통부는 사업용 차량 내 장치(운행기록계, 블랙박스, ADAS)가 수집하는 정보를 활용하여 도로위험정보를 수집하고 제공할 수 있는 기술 및 서비스를 개발 중에 있다. 본 연구는 이러한 기술개발을 대비하여 운전자 및 도로관리자에게 도로위험정보를 제공하기 위해서 연속류 및 단속류를 대상으로 개발한 알고리즘에 대한 통합평가를 실시하여 설정한 3개 시나리오들을 검증하였다. 그 결과, 통합평가 전체 정확도가 81.88%로 도출되었고 통합평가의 목적과 가정을 고려하여 1분 미만 데이터의 누락, GPS 좌표 위치와 알고리즘 관련 오류들만 본 통합평가 시 발생한 오류로 간주하였다. 그 중에서 GPS 오류 데이터들을 보정하여 전체 90.15%(도로파손의 확률: 99.38%, 결빙: 84.45%,안개: 94.42%)의 정확도로 도출하였다. 본 연구결과는 사업용 차량이 수집할 위치기반 정보 정확도 향상 및 정책개발의 기초자료로 활용될 수 있을 것이다.