• Journal of Environmental Health Sciences
• /
• v.2 no.1
• /
• pp.37-48
• /
• 1975

Air pollutants were measured to get useful data in preventing and controlling the pollution at industrial and semi-industrial, commercial, cross-road and residential areas by season in Busan from September 1973 to June 1974. Teated were dustfalls(ton/$km^2$/month)by Deposit Gauge method, sulfuric anhydride(mg $SO_3/day/100cm^2 PbO_2$) by Lead Peroxide candle method. The relations between pollution and metherologlcal factors and source of pollution were discussed, The findings are as follows: 1. The mean value of dustfalls was 24.8 tons rangi~ng from 12.5 tons to 44.5 tons. The highest amount of dustfalls of 29.0 tons was measured in crossroad areas while the 1oeest of 22.7 tons in commercial areas, and Winter the highest of 27.7 tons while in Spring the lowest of 21.2 tons. 2. The mean value of water soluble substances was 31.7 per cent, and seasonal variation of pH was shown as 4.20 in Autumn, 3.85 in Summer and 2.76 in Winter. 3. The mean value of sulfuric anhydride was 1.54mg ranging from 0.197mg to 4.162 mg. The highest concentration of sulfuric anhydride of 2.03mg was detected in cross-road areas while thelowest of 1.23mg in residential areas, and Summer the highest of 2.18mg while in Spring the lowest of 1.09mg(0. 92mg in Nov. 1973) 4. Dustfalls are more with the decreased of relative humidity and precipitation while concentrat:on of sulfuric anhydrides are more with the increased of relative humidity. 5. There is a probability of occuring chronic symptoms(respiratory and others) as the dustfalls with 24.8 tons and sulfuric anhydride with 1.54mg in Busan. According to this, it is the time to discuss monitoring system and systematic preventing methods.

• KIISE Transactions on Computing Practices
• /
• v.22 no.1
• /
• pp.8-19
• /
• 2016

Potholes are caused by the presence of water in the underlying soil structure, which weakens the road pavement by expansion and contraction of water at freezing and thawing temperatures. Recently, automatic pothole detection systems have been studied, such as vibration-based methods and laser scanning methods. However, the vibration-based methods have low detection accuracy and limited detection area. Moreover, the costs for laser scanning-based methods are significantly high. Thus, in this paper, we propose a new pothole detection system using a commercial black-box camera. Normally, the computing power of a commercial black-box camera is limited. Thus, the pothole detection algorithm should be designed to work with the embedded computing environment of a black-box camera. The designed pothole detection algorithm has been tested by implementing in a black-box camera. The experimental results are analyzed with specific evaluation metrics, such as sensitivity and precision. Our studies confirm that the proposed pothole detection system can be utilized to gather pothole information in real-time.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.83-88
• /
• 2015

Agricultural tractors are utilized on rough road such as rice paddy field. Therefore, static and dynamic load should be considered when simulating structural analysis with finite element analysis (FEA). But it consumes a lot of time and effort to measure dynamic load because of difficulty and complexity in modeling various field working load conditions and kinematics of machinery. In this paper, to reduce the efforts, 4-post road simulator is developed for agricultural tractor like modeling commercial vehicle. In proving ground test in our facility, I measured acceleration of front/rare axle and strain of body frame to validate input loads. The acceleration is used for defining input loads. And strain is validated with dynamics analysis including mode superposition method. As a result, I was able to calculate 4-post input road profiles, which represent similar proving ground profile with good reliability.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.85-95
• /
• 2009

According to the accident statistics published by the National Police Agency in 2007, the number of commercial vehicle accidents explains 3.5 percent of the total number of traffic accidents of the year. Compared to other types of vehicles commercial vehicles may provide more serious damages to both driver himself and passengers. Thus, they generate more serious social and economic problems. There have been various forms of systems such as a digital speedometer or a black box to meet the social requirement for reducing traffic accidents and improving safe driving. However, since the current systems are based on the data often accidents happened, there are lots of limitations to control drivers in real-time. Also, the current speedometers provide drivers with only speeds of vehicles and RPM information regardless of actual dangerous drive behaviors. Therefor, they lack of the effectiveness in terms of safety. In this research, real-time information systems for improving driver safety based on automatic risky driving behaviors, and thresholds to determine risky driving patterns were studied.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.305-310
• /
• 2003

This study is intended to outline the lessons that can be learned from European experience of the opportunities and challenges involved in operating train ferries to carry freight. The study considers the various train ferry routes that have operated over recent years in Europe, examines their characteristics, and then proceeds to evaluate the economic viability of train ferries in general. On the basis of this analysis, we have attempted to outline the conditions that appear to be required under which Train Ferries may be competitive. This study shows that long crossing train ferries in Europe have survived where the adjacent railway systems handle a significant volume of domestic traffic and do themselves playa serious role in the transport industry. There is no reason to suppose railway wagons cannot be carried economically over long distances. Experience in Western Europe is that they are best operated as mixed road trailer and rail wagon services. Only the lower deck need carry railway wagons, which greatly simplifies loading and the physical construction of the ship. Existing road based ro-ro ferries can be adapted to become rail ferries. It is, however, essential that there is commercial clarity as to the responsibility for ensuring the overall service is viable. To that end, the ferry company is responsible for marketing the service and managing relationships between the two railway authorities.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.5
• /
• pp.463-471
• /
• 2013

This paper presents design and control of electronic control suspension(ECS) equipped with controllable magnetorheological(MR) damper for passenger vehicle. In order to achieve this goal, a cylindrical type MR fluid damper that satisfies design specification of a middle-sized commercial passenger vehicle is proposed. After manufacturing the MR damper with design parameters, their field-dependent damping forces are experimentally evaluated and compared with those of a conventional damper. A quarter-vehicle MR ECS system consisting of sprung mass, spring, tire, controller and the MR damper is established in order to investigate the ride comfort performances. On the basis of the governing equation of motion of the suspension system, five control strategies(soft, hard, comfort, sport and optimal mode) are formulated. The proposed control strategies are then experimentally realized with the quarter-vehicle MR ECS system. Control performances such as vertical acceleration of the car body and tire deflection are evaluated in frequency domains on random road condition. In addition, performance comparison of WRMS(weighted root mean square) of the quarter-vehicle MR ECS system on random road are undertaken in order to investigate ride comfort characteristics.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.107-114
• /
• 2009

Human walking is essential and important mean of transportation. Pedestrian safety is recently important because accidents often happen while walking. This research is showing that Walking-environmental factors have effect on safety while walking. At first, exact 15 factors and conduct survey in the preceding research. After that, exact 4 important factors through factor analysis. At result of Multiple regression analysis, null hypothesis has proved to be true by satisfying therms which is F-value 9.211 and P-value 0.000. and come to the conclusion that walking-environmental factors influence pedestrian safety. 4 important factors can be listed by below. Pedestrian-road characteristic, landscape characteristic, commercial characteristic, walking characteristics by following influence. Especially, landscape characteristic and pedestrian-road characteristic can be vital factors.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.77-85
• /
• 2010

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. Gas welding is very important and useful technology in fabrication of a railroad car and vehicles structure.However fatigue strength of the gas welded joints is considerably lower than parent metal due to stress concentration at the weld, fatigue strength evaluation of gas welded joints are very important to evaluate the reliability and durability of railroad cars and to establish a criterion of long life fatigue design. In this paper, $({\Delta}{\sigma}_a)_R-N_f$ curve were obtained by fatigue tests. Using these results, the accelerated life test(ALT) was conducted. From the experimental results, an acceleration model was derived and acceleration factors are estimated. So it is intended to obtain the useful information for the fatigue lifetime of plug and ring gas welded joints and data analysis by statistic reliability method, to save time and cost, and to develop optimum accelerated life prediction plans.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.178-186
• /
• 2002

3-D numerical studies are performed to investigate the effect of the trunk height and approaching air velocities on the pressure distribution of notchback road vehicle. For this purpose, the models of test vehicle with four different trunk heights are introduced and PHOENICS, a commercial CFD code, is used to simulate the flow phenomena and to estimate the values of pressure coefficients along the surface of vehicle. The standard k-$\xi$ model is adopted for the simulation of turbulence. The numerical results say that the height variation of trunk makes almost no influence on the distribution of the value of pressure coefficient along upper surface but makes very strong effects on the rear surface. That is, the value of pressure coefficient becomes smaller as the height is increased along the rear surface and the bottom surface. Approaching air velocity make no differences on pressure coefficients. Through the analysis of pressure coefficient on the vehicle surfaces one tried to assess aerodynamic drag and lift of vehicle. The pressure distribution on the rear surface affected more on drag and lift than pressure distribution on the front surface of the vehicle does. The increase of trunk height makes positive effects on the lift decrease but negative effects on drag reduction.

• Acta Via Serica
• /
• v.2 no.1
• /
• pp.85-108
• /
• 2017

This paper details the advance of the "Hui" (回) people to Korea and their socioeconomic activities in forming their own community during the late Goryeo and early Joseon period. Hui (回) or Hui Hui (回回) is generally recognized as representative of Muslim culture in Chinese and Korean sources. From the $8^{th}$ century, Korean-Muslim cultural relations accelerated as an outcome of ancient Chinese-West Asian commercial transactions along the Silk Road. These contacts between Muslims and Koreans on the Korean peninsula are borne out by references to Korea found in 23 Islamic sources written between the $9^{th}$ and $16^{th}$ centuries by 18 Muslim scholars, including Ibn Khurdadbih, Sulaiman al-Tajir, and Mas'ud1 i. Ibn Khurdadbih was the first Arab who wrote of Muslims' residence in the Unified Silla Kingdom (661-935CE). However, in the period of Silla, we could not find any reliable written documents in Korea to show encounters between Korea and the Muslim world. In the Goryeosa (GS) chronicle, Muslim merchants who came to Korea were described as "Daesik" (大食: Tashi). Daesik (Tashi) is most probably derived from "Tajir", which means "trader" in Muslim language. Muslims' mass influx and their wide ranging influence on Korean society manifested from the late $13^{th}$ century when the Goryeo Dynasty first came under Mongol control and afterward in the early $15^{th}$ century with the new dynasty of Joseon in Korea.