• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.120-125
• /
• 2002

AC powder EL devices were fabricated by screen printing method with the dielectric materials in insulating layer and the electrical resistivity of rear electrode. Brightness and current density were measured at voltage range of 50∼300 $V_{rms}$ to estimate optoelectrical properties of AC powder EL devices, respectively. Frequency generator was used as system producing frequency and voltage of a sine wave. Brightness and current density were measured by luminometer and multimeter. Also, dielectric constant for dielectric layer was measured by impedance analyser after preparing thick film. Dielectric constant was improved with amount of $TiO_2$ to $BaTiO_3$ powder. By applying such a process to dielectric layer of low cost AC powder EL device, brightness was improved to 50 cd/$m^2$ at similar current density. Dielectric constant $BaTiO_3$ powder by solution combustion process is better than commercial $BaTiO_3$ powder. By applying to that of low power consumption AC powder EL device, brightness was improved to 85 cd/$m^2$. Brightness of AC powder EL device was relatively decreased by control of electrical resistivity of rear electrode, current density was also decreased.

• Journal of Acupuncture Research
• /
• v.32 no.4
• /
• pp.91-102
• /
• 2015

Objectives : The Oriental medical device industry is expected to continue to experience significant growth. It should increase its global market share rather than focusing on the domestic market. Countries around the world self-regulate their domestic market, so this study aims to aid in the development of a particular overseas market by introducing the U.S.(the largest market) medical device registration and approval process. Methods : For an understanding of the US medical device licensing process, we researched the relevant regulatory organization (FDA), the history, definition and classification of medical devices, the approval and 510(k) submission process related to substantial equivalence, IEC 60601-1 Edition 3, usability tests, and so on. Results : Medical devices in the United States are assigned to one of three regulatory classes: Class I, Class II and Class III, based on the level of control necessary to assure the safety and effectiveness of the device. If a company's device is classified as Class II and if it is not exempt, a 510k will be required for marketing. 1) A 510(k) is a premarket submission made to the FDA to demonstrate that the new device to be marketed is "substantially equivalent" to a legally marketed device (predicate device) 2) The IEC 60601-1 Edition 3 preparation process, which contains information related to usability, is expensive and time-consuming but a critical requirement. Conclusions : Although the U.S. market has high barriers to entry, access to this, large overseas market will encourage development of the Oriental medical device industry and commercial value enhancement is expected.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.47-53
• /
• 2009

In this study, highly ordered AAO (Anodic Aluminum Oxide) with nanopores was prepared by commercial grade Al substrate containing 3.5 wt.% impurities through two step anodizing method. Nanopores of prepared AAO arrays were used as templates for preparing nanofiber. $TiO_2$ was deposited by using DP (deposition-precipitation) method into AAO pores to grow nanofiber. Au particles were loaded on this $TiO_2$ nanofiber which was grown vertically. Prepared 2 wt.% $Au/TiO_2$ nanofiber was characterized by XRD, SEM and Raman. The crystal structure was analyzed by the XRD. SEM was used to observe pore size and pore wall thickness. Photocatalytic activity of co-oxidation was compared with $TiO_2$ and $Au/TiO_2$ nanofiber on AAO arrays.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1265-1270
• /
• 2009

Pathogens contaminated on the surface of utensils could contribute to the occurrence of outbreaks due to cross-contamination to foods during the food preparation process. Therefore, the efficacy of chemical sanitizers (chlorine-based and alcohol-based commercial sanitizers) and dry-heat ($71^{\circ}C$) on inhibiting biofilms of five foodborne pathogens (Escherichia coli O157:H7, Salmonella Typhimurium, Pseudomonas aeruginosa, Listeria monocytogenes, and Staphylococcus aureus) on the surface of stainless steel and polypropylene were investigated in this study. Initial populations of pathogens were 8.8$\sim$9.3 and 9.4$\sim$10.3 log CFU/coupon on the surface of stainless steel and polypropylene coupon, respectively, and these populations were not significantly reduced when they were treated with water for 5 min at room temperature. Treatments with chlorine sanitizer and dry-heat were not effective on inactivating pathogens on the surfaces of stainless steel and polypropylene. In contrast, treatments with alcohol sanitizer were very effective on inactivating pathogens on the surfaced of stainless steel and polypropylene. Reduction levels ranged from 3.4 to 6.4 log and from 5.5 to 7.4 log CFU/coupon in stainless steel and plastic coupons, respectively. From these results, alcohol-based sanitizer could be used as a potential way for controlling microbial contamination on the surface of utensils, cooking equipment, and other related environments.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.456-470
• /
• 2013

Hollow-fiber membranes, is one of the new technologies that is growing rapidly in the past few decades. In addition, separation membranes using polymer materials, have attracted attentions in various fields including gas separation, fuel cells, water treatment, wastewater treatment, and organic separation. Nanofiltration (NF) membranes having the separation characteristics in the intermediate range between ultrafiltration and reverse osmosis (RO) membranes for liquid separation, with relatively low investment cost and operating pressure lower than that of RO membranes, have high permeance and rejection performance of multivalent ions as well as organic compounds of molecular weight between $200{\sim}1000gmol^{-1}$. In this paper, we would like to review the research trends on the various structure control and characterization of NF hollow fiber membranes with respect to materials and the methods of preparation (phase inversion method and interfacial polymerization method). Currently, most of NF membranes have been manufactured by plate and frame types or spiral wound types. But hollow fiber types have delayed in commercial products, because of the weak strength when to produce on the basis of the existing materials, therefore the development of new materials or improvement of existing materials will be needed. If improving manufacturing technology is available, hollow fiber types will replace spiral wound types and gradually show a higher market share.

• The Plant Pathology Journal
• /
• v.33 no.3
• /
• pp.337-344
• /
• 2017

To develop a commercial product using the mycoparasitic fungus Simplicillium lamellicola BCP, the scale-up of conidia production from a 5-l jar to a 5,000-l pilot bioreactor, optimization of the freeze-drying of the fermentation broth, and preparation of a wettable powder-type formulation were performed. Then, its disease control efficacy was evaluated against gray mold diseases of tomato and ginseng plants in field conditions. The final conidial yields of S. lamellicola BCP were $3.3{\times}10^9conidia/ml$ for a 5-l jar, $3.5{\times}10^9conidia/ml$ for a 500-l pilot vessel, and $3.1{\times}10^9conidia/ml$ for a 5,000-l pilot bioreactor. The conidial yield in the 5,000-l pilot bioreactor was comparable to that in the 5-l jar and 500-l pilot vessel. On the other hand, the highest conidial viability of 86% was obtained by the freeze-drying method using an additive combination of lactose, trehalose, soybean meal, and glycerin. Using the freeze-dried sample, a wettable powder-type formulation (active ingredient 10%; BCP-WP10) was prepared. A conidial viability of more than 50% was maintained in BCP-WP10 until 22 weeks for storage at $40^{\circ}C$. BCP-WP10 effectively suppressed the development of gray mold disease on tomato with control efficacies of 64.7% and 82.6% at 500- and 250-fold dilutions, respectively. It also reduced the incidence of gray mold on ginseng by 65.6% and 81.3% at 500- and 250-fold dilutions, respectively. The results indicated that the new microbial fungicide BCP-WP10 can be used widely to control gray mold diseases of various crops including tomato and ginseng.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1632-1638
• /
• 2010

Two experiments with growing pigs were conducted to investigate the effects of two distinct multienzyme preparations on nutrient digestibility, growth performance and blood profiles. In Exp. 1, a total of 96 pigs ($29.7{\pm}0.69\;kg$) were utilized in a 42-day performance and digestibility trial using four dietary treatments: CON (control diet), ENDO (control+0.10% Endopower), NSPase1 (control+0.10% NSPase) and NSPase2 (control+0.20% NSPase). Endopower was a commercial multienzyme preparation which contained ${\alpha}$-galactosidase, galactomannase, xylanase and ${\beta}$-glucanase. NSPase mainly contained ${\alpha}$-1,6-${\beta}$-galactosidase, ${\beta}$-1,4-mannanase and ${\beta}$-1,4-mannosidase. There were six replication pens per treatment with four pigs per pen. Pigs fed NSPase1 diet had a higher ADG (p<0.05) and G:F (p<0.05) than those fed the control diet. There were no significant differences in growth performance among the multienzyme treatments (p>0.05). Compared with CON, apparent digestibility of DM was increased (p<0.05) by ENDO treatment. N digestibility was improved (p<0.05) in response to multienzyme treatments during the experimental period. Blood urea nitrogen (BUN) was higher (p<0.05) in ENDO treatment than in CON and NSPase1 treatments at the end of the experiment, while the glucose level improved (p<0.05) due to ENDO and NSPase2 treatments. In Exp. 2, four ileal-cannulated, growing barrows ($20.17{\pm}1.31\;kg$) were housed in individual metabolism crates and randomly assigned to 1of 4 treatments (same as Exp. 1) within a $4{\times}4$ Latin square design. Enzyme supplementations improved the majority of apparent ileal amino acid digestibilities (p<0.05). It is concluded that the supplementation of NSPase1 improved growth performance as well as N digestibility and partially improved apparent ileal amino acid digestibility in growing pigs fed a diet based on corn and soybean meal.

• Fisheries and Aquatic Sciences
• /
• v.19 no.10
• /
• pp.40.1-40.14
• /
• 2016

Background: Due to the paucity of oceanic resources utilized in the preparation of diets for cultured fish, commercial feed producers have been trying to replace fishmeal (FM) using alternative protein sources such as vegetable protein meals (VMs). One of the main drawbacks of using VMs in fish feed is related to the presence of a variety of anti-nutritional factors, which could trigger an inflammation process in the distal intestine. This reduces the capacity of the enterocytes to absorb nutrients leading to reduced fish growth performances. Methods: We evaluated the mitigating effects of butyrate and taurine used as feed additives on the morphological abnormalities caused by a soybean meal (SBM)-based diet in the distal intestine of sea bass (Dicentrarchus labrax). We used three experimental diets, containing the same low percentage of FM and high percentage of SBM; two diets were supplemented with either 0.2% sodium butyrate or taurine. Histological changes in the intestine of fish were determined by light and transmission electron microscopy. Infiltration of $CD45^+$ leucocytes in the lamina propria and in the submucosa was assessed by immunohistochemistry. We also quantified by One-Step Taqman$^{(R)}$ real-time RT-PCR the messenger RNA (mRNA) abundance of a panel of genes involved in the intestinal mucosa inflammatory response such as $TNF{\alpha}$ (tumor necrosis factor alpha) and interleukins: IL-8, IL-$1{\beta}$, IL-10, and IL-6. Results: Fish that received for 2 months the diet with 30% soy protein (16.7% SBM and 12.8% full-fat soy) developed an inflammation in the distal intestine, as confirmed by histological and immunohistochemistry data. The expression of target genes in the intestine was deeply influenced by the type of fish diet. Fish fed with taurine-supplemented diet displayed the lowest number of mRNA copies of IL-$1{\beta}$, IL-8, and IL-10 genes in comparison to fish fed with control or butyrate-supplemented diets. Dietary butyrate caused an upregulation of the $TNF{\alpha}$ gene transcription. Among the quantified interleukins, IL-6 was the only one to be not influenced by the diet. Conclusions: Histological and gene expression data suggest that butyrate and taurine could have a role in normalizing the intestinal abnormalities caused by the SBM, but the underling mechanisms of action seem different.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.180-187
• /
• 2010

Since the introduction of restorative dental composites, their physical properties have been significantly improved. However, polymerization shrinkage is still a major drawback. Many efforts have been made to develop a low shrinking composite, and silorane-based composites have recently been introduced into the market. In addition, many different methods have been developed to measure the polymerization shrinkage. In this study, we developed a new method to measure the linear polymerization shrinkage of composites without direct contact to a specimen using a particle tracking method with computer vision. The shrinkage kinetics of a commercial silorane-based composite (P90) and two conventional methacrylate-based composites (Z250 and Z350) were investigated and compared. The results were as follows: 1. The linear shrinkage of composites was 0.33-1.41%. Shrinkage was lowest for the silorane-based (P90) composite, and highest for the flowable Z350 composite. 2. The new instrument was able to measure the true linear shrinkage of composites in real time without sensitivity to the specimen preparation and geometry.