• 한국전기전자재료학회논문지
• /
• 제35권3호
• /
• pp.223-231
• /
• 2022

분광학은 재료의 결정학적, 화학적 구조를 분석하기 위해 가장 보편적으로 활용되는 분석 기법이다. 이러한 기조에 따라 다양한 분석 소프트웨어와 peak fitting과 관련된 기술적 가이드라인이 보급되었지만, 정작 '왜' 중간 계산 과정을 거치고 해당 함수를 쓰는지에 대한 논의는 부족한 실정이다. 따라서 본 tutorial에서는 X선 기반 분광광도계를 통해 얻은 데이터 분석의 기초를 논하고자 한다. 이를 위해 관련된 peak fitting을 위해 필요한 실용적 배경지식을 제시하였다. 나아가, 하나의 예시로 임의로 선정한 X선 광전자 분광법 데이터에 대한 curve fitting 과정을 순서에 따라 알기 쉽게 소개하였다. 제시한 기초 이론은 특정 소프트웨어에 국한된 내용이 아니라 fitting tool이 있는 모든 소프트웨어에서 그대로 활용 가능할뿐더러 다른 분광법 데이터를 분석하는 데 적용 가능하기 때문에, 본 내용을 숙지한다면 보다 수월한 연구 진행을 위한 바탕이 될 수 있을 것이라 기대한다.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2023-2030
• /
• 2022

A novel pulse fitting analysis (PFA) method is presented for the acquisition of nuclear spectra. The charging process of the feedback capacitor in the resistive feedback charge-sensitive preamplifier is equivalent to the impulsive pulse, and its impulse response function (IRF) can be obtained by non-linear fitting of the falling edge of the nuclear pulse. The integral of the IRF excluding the baseline represents the energy deposition of the particles in the detector. In addition, since the non-linear fitting process in PFA method is difficult to achieve in the conventional architecture of spectroscopy system, a new multi-channel analyzer (MCA) based on Zynq SoC is proposed, which transmits all the data of nuclear pulses from the programmable logic (PL) to the processing system (PS) by high-speed AXI-Stream in order to implement PFA method with precision. The linearity of new MCA has been tested. The spectrum of ¹³⁷Cs was obtained using LaBr₃(Ce) scintillator detector, and was compared with commercial MCA by ORTEC. The results of tests indicate that the MCA based on PFA method has the same performance as the commercial MCA based on pulse height analysis (PHA) method and excellent linearity for γ-rays with different energies, which infers that PFA method is an effective and promising method for the acquisition of spectra. Furthermore, it provides a new solution for nuclear pulse processing algorithms involving regression and iterative processes.

• 디지털콘텐츠학회 논문지
• /
• 제11권3호
• /
• pp.299-306
• /
• 2010

인터넷과 컴퓨터 그래픽 기술의 발전으로 최근 디지털 패션 기술 분야에서는 의상을 3D로 재현한 가상 피팅 서비스를 가능하게 되었다. 본 논문에서는 매장, 인터넷 쇼핑몰, 광고 등 여러 상황에서 가상거울, PC, 모바일 등 다양한 장치에서 가상 피팅 서비스를 이용할 수 있는 통합 솔루션을 제안한다. 제안하는 통합 솔루션은 총 3가지 방법으로 다음과 같다. 첫 번째 방법은 매장에 비치된 가상 거울을 통해 터치를 통한 입력으로 가상 피팅을 이용한다. 두 번째 방법은 인터넷 쇼핑몰에 접속하여 의상 상품과 아바타를 이용한 가상 피팅을 체험한다. 마지막 방법은 모바일 어플리케이션에서 2차원 바코드로 의상 정보를 입력하여 디지털 패션을 위한 3D 가상 피팅 서비스를 체험할 수 있다. 또한 체험한 가상 피팅 결과를 이미지 파일 형태의 멀티미디어 메시지 서비스(MMS)로 다른 사람에게 전송할 수 있는 솔루션을 구축하였다.

• 센서학회지
• /
• 제27권4호
• /
• pp.242-248
• /
• 2018

Bicycle fittings have been used to ride bicycles comfortably while minimizing non-traumatic injuries. To analyze the cause of non-traumatic injuries, it is necessary to measure the body weight distribution in various biking positions. In this study, a weight distribution measurement system was implemented by installing five weighable devices on the saddle, both pedals, and both handle grips of a bicycle. To measure the body weight applied through the saddle, the structure of a commercial seat post was modified and a load cell was installed inside. Weighable pedals and handle grips were designed using a 3D modeling program and fabricated by employing a 3D printer. The body weight distribution for ten bicycle riders was measured when the two pedals were aligned horizontally and vertically. Experimental results showed that the body weight distribution varied significantly depending on human body shape, even after the bicycle fitting was completed. The difference between the body weight measured by the proposed system and a commercial scale was less than 3 %.

• 복식
• /
• 제56권7호
• /
• pp.121-132
• /
• 2006

The feeling of self-confidence, the sense of well-being and of social acceptance that comes from the wearing clothes that is functional, appropriate, and attractive, is important to all the people, but to those with physical limitations, it is much more important. Finding well-fitting clothing can be a big challenge for them. This study focus on the cut of present available ready-to-wear garments and commercial patterns giving better fit and greater comfort and satisfaction. Subjects were limited to the people with body deformities caused by the brain injury. This can also meet the needs of silver groups in the aging society under the terms of human values and human rights. This study is based on the questionaires and interviews to identify the problems of ready-to-wear or commercial patterns, purchasing behaviors, and the demand for the functional clothes. This study focused on following objectives; 1) to discover what the problems are which confront the people with body deformity, 2) to find the problems in ready-to-wear garments or commercial patterns, 3) to provide information of pattern alteration f3r people with body deformities. A major limitation to the study is that the subjects numbers are limited and the distribution is not even. For the future study, large database with wide varieties of age and fitting test are suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.677-684
• /
• 2006

An ejector is a fluid transfer device to be used for mixing of fluids, maintaining vacuum, and overcoming a poor suction condition. To date, most ejectors have been made from the casting process. which is time-consuming and high-cost process. Therefore, a new production method of ejectors is desired if any. In this experimental study, we proposed a new type ejector manufactured from the commercial fitting materials and the welding process, which is equipped with an orifice type nozzle. The proposed ejector has a good integrity compared with the conventional ejector because the fittings have manufactured by forging and they have more strength than the casting materials. Furthermore we adopted a multi-opening orifice type nozzle for improving a suction capacity and compared with a single-opening orifice type nozzle. From the experimental results. we confirmed that the multi-opening nozzle had a food suction capacity than the single-opening nozzle and the proposed new type ejector showed higher vacuum than the conventional type ejector in non-load condition. These improved characteristics suggests that a new type ejector by using the commercial fittings opens the feasibility to be adopted in various industry fields and that the increased suction capacity can be achieved by altering the nozzle design of a conventional ejector.

• 동력기계공학회지
• /
• 제18권1호
• /
• pp.22-31
• /
• 2014

This paper introduced the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new velocity data reduction method using both a commercial two-dimensional curve-fitting program and the zone partition method of a calibration map was firstly introduced in this study. This new calibration method can be applied up to the wide flow angle of ${\pm}80^{\circ}$ despite of using a five-hole pressure probe because this data reduction method showed a comparatively good performance in calculating yaw and pitch angles from the calibration map.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.179-180
• /
• 2012

Back ferrule is a circular ring shaped metallic object which is used for fastening, joining or reinforcement during the tube fitting as well as to prevent leakage. Therefore, during tube fitting the leading edge of the back ferrule should be sufficiently hard enough to prevent leakage. In our research, we concentrated the improvement of two major factors. Firstly, to improve the surface hardness of the back ferrule made by AISI 316 Stainless Steel. Secondly, the enhancement of corrosion resistance of back ferrule after plasma treatment. Initially, the corrosion resistance and hardness of the back ferrule (both commercial and without treated) was not good enough for tube fitting but after applying plasma treatment with suitable conditions on ferrule, we improved the corrosion resistance and hardness of the back ferrule dramatically.