• 연구논문집
• /
• s.29
• /
• pp.123-130
• /
• 1999

Flow divider valve, a kind of hydraulic control valve to divide the flow from one input line to two output line uniformly, should be able to keep the constant flow to output lines despite of the change load or supply pressure. Having 5-10% flow diving error in commercial hydraulic products is one of main source of the accumulated error caused hydraulic system problem and demands the development of flow divider valve to control flow more accurately, In this paper, the dynamic characteristics of flow divider valve are investigated by the numerical estimation of the spool motion considered the external supply force. The optimum design of flow divider valve are proposed to reduce the flow diving error. For the dynamic characteristics analysis, the change of sectional area of fixed and variable orifice, and spool are studied when the input signal is accepted to a constant load.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.6
• /
• pp.429-436
• /
• 2010

Hydraulic experiments were conducted to analyze the characteristics of stem waves due to multidirectional random wave incidence with the different incident angles of main wave direction. Both multi-directional and uni-directional random waves were used to generate the stem waves and their results were compared with each other. The experiment shows multi-directional random waves developed along the vertical wall tend to increase as the incident angle increases similar to the uni-directional waves. Moreover, the stem wave widths were almost same as those in uni-directional random wave cases. However, the experiment demonstrate the stem wave heights were significantly smaller in multi-directional random wave cases than in uni-directional random wave cases.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.137-140
• /
• 2000

Numerous novel marine natural products have been discovered and isolated from varied marine organisms by the diligent bio-prospectors over the past decades. An assessment of the current status of commercial development of these natural compounds indicates only minimal commercialization due to the lack of sustainable supply. To bridge the gaps between discovery and commercialization of these tantalizing bioactive compounds, marine bioprocess engineering is the key for its success. The problems, challenges and opportunities for marine bioprocess engineers are examined for the timely transformation of the discovery into commercial reality. Marine bioprocess engineers will find it the most rewarding practice of their expertise in diving into the ocean.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.302-307
• /
• 2001

The underwater background noise measured in Geoje and Tongyoung diving fishing ground from May to December, 2000 and analyzed to get optimum carrier frequency and transmitter power level for underwater wireless telephone design. The results obtained are summarized as follows: 1. At the Geoje and Tongyoung diving fishing ground, the lowest ambient noise band was 25~30kHz with 57dB and 52dB re 1$\mu$Pa, respectively. 2. At the Geoje and Tongyoung diving fishing ground, the lowest noise band during fishing activity was 67dB and 62dB re 1$\mu$Pa, respectively. 3. At the Geoje diving fishing ground, the noise of water jetter which is a digging machine for subbottom shells was 102dB re 1$\mu$Pa. 4. Considering the design parameters of underwater wireless telephone, it is found that the optimum carrier frequency band is around 30kHz and the transmitter source level should be at least 131dB re 1$\mu$Pa for 500m range telephone.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.4
• /
• pp.127-142
• /
• 2020

This study compared the domestic and international commercial design patterns and domestic consumer preferences for wetsuit designs to develop a user-centered wetsuit design. An analysis of the domestic and international design elements for 1,802 wetsuits sold online over the past three years showed that the most frequent shapes, dominant colors, and patterns were the same, as consumers tended to buy full suits that were black or had geometric patterns. Dominant colors and assort/accent colors were different from the survey results. Men's wetsuits used fewer colors and patterns than women's suits. Domestic wetsuits used fewer patterns than those sold abroad; in addition, colors were applied differently. A consumer preference survey conducted on 213 male and female consumers in their 20s and their 50s in Korea indicated that 53.5% of respondents were the most affected by the shape when choosing a wetsuit design. The preferred color scheme was two colors, with a vivid tone used as an accent color. The factor analysis results on wetsuit design preference uncovered the six factors: individuality, display, function, acceptance, imitation, and comparison. An independent sample t-test also showed that men perceive individuality, imitations, and comparison factors higher than women.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.507-528
• /
• 2015

The Fish Collection Project collected 356 fish species from the Southern Sea of Korea during 2010-2012, 55 more than previously collected. The fishes belonged to 3 classes, 29 orders and 128 families. The 5 dominant orders, Perciformes, Scorpaeniformes, Pleuronectiformes, Tetraodontiformes, and Clupeiformes, accounted for ~80% of the identified species. Additionally, 126 species were collected from the Southern Sea for the first time, while 85 species that had been found in previous collections were not seen. The species variety of fish in the Southern Sea may be influenced by its unique oceanographic conditions such as increased water temperatures in coastal areas, so regular surveys would assist our understanding of the fish community. We suggest that various collection methods, including diving, be used to collect fish species inhabiting rocky shore or deep-sea areas, where commercial fishing gear is difficult to deploy.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.611-620
• /
• 2008

The process of sediment transport has a very complex mechanism due to waves, currents and bottom topography changes. Usually, beach erosion occurs from various causes such as non-equilibrium sediment transport condition, construction of seawall and rip currents. Therefore, when we try to reduce and develop countermeasures for beach erosion, we have to know the main mode and direction of sediment transport that causes beach erosion. In this study, the process of sediment transport on Jeonchon-Najung beach and main causes of beach erosion have been studied. Field investigation data, aerial photos and the results of numerical model test were used in the analysis. As a result, it was realized that the main causes of beach erosion at Jeonchon-Najung beach was due to the construction of fishery harbors and a seawall.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.6
• /
• pp.602-610
• /
• 2008

A beach has such functions as disaster prevention, providing an amenity place, attracting people and maintaining the coastal ecosystem. Already well known that a beach provides an amenity place, it has also been ascertained through various examples that a sand beach performs a very important function to maintain the coastal ecosystem as well. However, Beach erosion began to occur in Korea in the 1990's and posed a social problem in the late 1990's. Nowadays, along the shorelines of Korea's many beaches, about 400 beaches have reported erosion. This study demonstrate the Disaster Overall Prevention System for Beach Erosion and it's application. The Disaster Overall Prevention System for Beach Erosion is a coastal management system established for managing the implementation of long-term countermeasures to protect eroded beaches effectively in this study. Especially, the economic feasibility test and adaptive management for sustainable mitigation included in DOPS. The coastal prevention work applied to Namae beach is carried out by Disaster Overall Prevention System. Consequently, beach nourishment is proposed as a main countermeasure. Also, submerged artificial reefs and groin integrating artificial rock are proposed as secondary countermeasures for beach erosion. This resulted to be the optimal beach erosion countermeasure from DOPS, considering the economic and environmental conditions of the study area.