• 방송공학회논문지
• /
• 제12권4호
• /
• pp.333-341
• /
• 2007

Multi-view video has recently gained much attraction from academic and commercial fields because it can deliver the immersive viewing of natural scenes. This paper presents multi-view video processing being composed of intermediate view reconstruction (IVR), graphics composition, and multi-view video viewer. First we generate virtual views between multi-view cameras using depth and texture images of the input videos. Then we mix graphic objects to the generated view images. The multi-view video viewer is developed to examine the reconstructed images and composite images. As well, it can provide users with some special effects of multi-view video. We present experimental results that validate our proposed method and show that graphic objects could become the inalienable part of the multi-view video.

• 전기학회논문지
• /
• 제60권8호
• /
• pp.1599-1605
• /
• 2011

From now on, power line communication was made use of controling using 450 kHz narrow band, but as the PLC technology developing, in the near future get to the commercial step that is broadband PLC upto 30 MHz. In this paper, analyze the possibility of moving picture transmission for adapting surveillance camera which is among of the application of PLC. To analyze characteristics of channel, estimate the noise and impedance of lab, office, home. In case of noise, there is no problem to communicate each other because of 20 ~ 50 dB gain. In case of impedance, average impedance is about 100 ohm, it satisfy standards of designing modem but because max and min values get out of expectation there are some problem to acquire fully capacity of modems. Its condition is the same as transmission of multimedia data. In this test as more packets, as more handling rate, in lab, for the case that transmit 1,518 byte as the speed of 6 Mbps handling rate is upto 100%, it means possibility of moving picture transmission as the 6 Mbps speed. For delayed time there is no relationship about transmitted packets. As a result, there is no problem about applying surveillance camera via the PLC. And more cameras can work within PLC for considering the number of transmitted frames.

• 방송공학회논문지
• /
• 제14권6호
• /
• pp.742-748
• /
• 2009

대부분의 상업적 디지털카메라들은 가격과 크기를 줄이기 위해서 Color Filter Array (CFA)를 사용한다. CFA를 통과한 이미지는 픽셀 당 오직 단일 칼라정보만 가지고 있기 때문에, 정보를 잃어버린 나머지 2개의 색 정보를 얻기 위해서 보간을 해야하는데 이 과정을 디모자이킹 (Demosaicing) 이라고 부른다. 수 많은 디모자이킹 알고리듬 방법들이 제안되어 왔음에도 불구하고, 여전히 무지개 형태의 에러 (rainbow artifact) 와 지퍼 모양의 에러 (zippering artifact) 의 문제를 가지고 있다. 본 논문에서는 향상된 가중치 함수를 이용하여 주변 픽셀값들의 경향성을 이용한 디모자이킹 알고리듬 방법을 제안한다. 실험결과, 우리가 제안한 알고리듬은 주관적 화질뿐만 아니라 객관적 화질에서도 기존의 방법들보다 뛰어다나는 것을 보여준다.

• 한국멀티미디어학회논문지
• /
• 제20권11호
• /
• pp.1741-1749
• /
• 2017

In commercial digital-cameras, color-filter filters light according to wavelength range of color filter array (CFA) and the filtered intensities contain color information of light. Then, output data of CFA is transformed to final rendered image through demosaicing process. In image processing of digital-camera, the quality of the final rendered image is affected by optical cross talk of CFA, kind of CFA pattern etc. Basically, pattern of CFA plays important role in image quality of final image rendered by digital-camera. Therefore, an evaluation system capable of quantitatively evaluating CFA is needed. This paper proposes a novel evaluation system using existing and proposed image metrics for evaluating CFAs of digital-camera. Proposed CFA evaluation system consist of color difference in CIELAB and S-CIELAB, Structure SImilarity (SSIM), MTF50, moire starting point (MSP), and subjective preference (SP). MSP and SP are newly designed for the proposed evaluation system. Proposed evaluation system is expressed in polar coordinates to analyze the characteristics of CFA objectively and intuitively. Through simulations, we confirmed that proposed CFA evaluation system can objectively assess performance of developed CFAs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.711-714
• /
• 2002

Thermal infrared camera have poor image qualities compared to commercial CCD cameras, as in contrast, brightness, and. resolution. To compensate the poor Image quality problems associated with the thermal infrared camera, the technique of superimposing thermal infrared image into real ccd image is proposed. The mobile robot KAEROT/m2, loaded with sensor head system at the mast, is entered to monitor leakage of heavy water and thermal abnormality of the calandria reactor area in overhaul period. The sensor head system is composed of thermal infrared camera and cod camera In parallel. When thermal abnormality on observation points and areas of calandria reactor area is occurred, unusual hot image taken from thermal infrared camera is superimposed on real CCD image. In this inspection experiment, more accurate positions of thermal abnormalities on calandria reactor area can be estimated by using technique of mapping thermal infrared image into CCD image, which include characters arranged in MPOQ order.

• Journal of Animal Science and Technology
• /
• 제62권2호
• /
• pp.276-291
• /
• 2020

This study was conducted to investigate behavioral changes in laying hens (Hy-Line Brown) after transfer to a multi-tier system from the floor system and to examine their production performance. The hens were randomly divided into two groups and were allocated to the multi-tier system and the floor system at a commercial farm. Behavior of the laying hens was recorded by CCD (charge-coupled device) cameras and a digital video recorder. The data were scanned every 2 min to obtain an instantaneous behavioral sample or were immediately counted whenever the hens exhibited a designated behavior. Behavior changed dramatically during the first seven days. Egg production was higher in the multi-tier system, while cracked and dirty eggs were more frequent in the floor system (p < 0.05). No differences in mortality rate or egg quality were observed between the groups. In conclusion, the hens needed at least seven days to adapt to the multi-tier system. The multi-tier system was more efficient than the floor system in terms of production performance.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.251-256
• /
• 2006

There is a great demand of micro-actuators for mobile information devices such as SFF optical drives and mobile phone cameras. However, the magnetic coils used in conventional electromagnetic motors are a major obstacle for the miniaturization because of their complicated structures and large power consumption. In this paper, a linear ultrasonic motor to actuate focusing lens of mobile devices is proposed. The new actuator uses a ring type bimorph piezoelectric material, and $d_{31}$ mode is adopted for applying linear motion. The interaction between inertia force and friction force makes linear motion by high-frequency saw signal input. The saw signal gives steady forces on the one direction by asymmetric inclination property of the signal itself on time domain. A commercial FEM(ANSYS) was used in this investigation for simulating structural analysis, identification of dynamic property, such as resultant displacement and coupled analysis with piezoelectric material. To evaluate the performance of the new design, a prototype was manufactured and experiments were carried out. Experimental results show the actuator motion of 5.4 mm/s at 10V saw signal of 41 kHz.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.166-172
• /
• 2004

An underwater motion measurement system was constructed for applications to the model basin. A commercial motion capture system, FALCON of Motion Analysis Corp., which corrects automatically the distortion caused by refraction of the light passing through water and air, was adopted for underwater motion measurement. The modifications of FALCON system were performed: waterproofing camera housings, markers, connectors, and a new blue ring lighter. the accuracy of the motion measurement was obtained within the calibration error of 0.87mm in average and 0.89mm in standard deviation for the distance of 500mm between two markers on the calibration device. the volume of $2100mm(length)\times2100mm(breadth)\times2300mm(Height)$ was covered with 4 cameras of the underwater motion measurement system. For the performance verification, motion measurement test of a vertical mooring chain model excited at the top end was carried out. The 3D motions of mooring model were measured with variable amplitude and period of the forced excitation. Higher order motions of the mooring model were observed as the excitation period decreases. the performance of the system was verified by successfully measuring 3D motion of mooring model.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.641-648
• /
• 2019

The authors investigate the feasibility of applying a vision-based displacement-measurement technique in the characterization of a SMA damper recently introduced in the literature. The experimental campaign tests a steel frame on a uni-axial shaking table driven by sinusoidal signals in the frequency range from 1Hz to 5Hz. Three different cameras are used to collect the images, namely an industrial camera and two commercial smartphones. The achieved results are compared. The camera showing the better performance is then used to test the same frame after its base isolation. U-shaped, shape-memory-alloy (SMA) elements are installed as dampers at the isolation level. The accelerations of the shaking table and those of the frame basement are measured by accelerometers. A system of markers is glued on these system components, as well as along the U-shaped elements serving as dampers. The different phases of the test are discussed, in the attempt to obtain as much possible information on the behavior of the SMA elements. Several tests were carried out until the thinner U-shaped element went to failure.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.159-166
• /
• 2008

최근 교통감시시스템은 실시간의 영상검지시스템(VIPS)을 가장 선호하고 있으며, 그 수요는 매년 증가하고 있는 추세이다. 일반적으로 영상검지시스템은 공간기반의 검지알고리즘을 사용하고 있으며, 교통량, 속도, 점유율 등의 교통정보를 제공하고 있다. 현재 전 세계적으로 이미 상용화되어 있는 대부분의 영상검지시스템들은 Tripwire기반의 검지영역 내 차량의 존재유무를 판단하여 교통정보를 수집하는 알고리즘으로 구성되어 있으나, 개별차량에 대한 걸지는 불가능한 한계를 갖고 있다. 반면 개벽차량의 추적시스템은 보다 구체적인 공간적 교통정보를 제공할 수 있어 사고검지, 급차선 변경 등 교통정보를 보다 다양화 할 수 있다는 장점이 있으나 추적길이가 불과 100미터이내이면, 그 이상 관측하기 위해서는 운영자가 카메라를 줌인을 하여 영상을 확대하여야 한다. 따라서 본 논문에서는 차량 추적의 효과를 높이기 위해서 기존의 100미터 이내 추적거리를 여러 대의 CCTV시스템을 이용하더라도 200미터이상으로 확대함으로써 사고 또는 비정상적 차량흐름을 검지할 수 있는 알고리즘을 제안한다.