• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.475-486
• /
• 2020

Climate change scenarios are the basis of research to cope with climate change, and consist of large-scale spatio-temporal data. From the data point of view, one scenario has a large capacity of about 83 gigabytes or more, and the data format is semi-structured, making it difficult to utilize the data through means such as search, extraction, archiving and analysis. In this study, a tool for analyzing extreme climate events based on spatial information is developed to improve the usability of large-scale, multi-period climate change scenarios. In addition, a pilot analysis is conducted on the time and space in which the heavy rain thresholds that occurred in the past can occur in the future, by applying the developed tool to the RCP8.5 climate change scenario. As a result, the days with a cumulative rainfall of more than 587.6 mm over three days would account for about 76 days in the 2080s, and localized heavy rains would occur. The developed analysis tool was designed to facilitate the entire process from the initial setting through to deriving analysis results on a single platform, and enabled the results of the analysis to be implemented in various formats without using specific commercial software: web document format (HTML), image (PNG), climate change scenario (ESR), statistics (XLS). Therefore, the utilization of this analysis tool is considered to be useful for determining future prospects for climate change or vulnerability assessment, etc., and it is expected to be used to develop an analysis tool for climate change scenarios based on climate change reports to be presented in the future.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.1
• /
• pp.22-28
• /
• 2015

The design on a riser in 1MW OTEC system is performed. The minimum diameter of the riser is decided depending on intake quantity of deep-sea water to supply an OTEC cycle. An applicable pipe material is selected from analyzing the properties of commercial pipes. The selected HDPE pipe with the low density and strength is reinforced with a lumped block attached at the end of and wire ropes along the riser. A lumped block, connected to a floating structure by wire ropes, with 25% and 50% weight of a GFRP riser is designed to be attached the end of a riser. The structural safety of the HDPE riser with wire rope supporting axial loads induced by a lumped block is analyzed under the harsh ocean environmental condition near Hawaii ocean with the numerical method. The final dimension of the riser and accessories is determined considering the economic point of view. The designed riser will be applicable to the construction of the 1 MW OTEC pilot plant.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.34-46
• /
• 2005

For treating a huge amount of plastic waste with the environment problem, pyrolysis of plastic waste into alternative fuel oil is one of important issue in recycling methods. This study was introduced over the trend of generation of plastic waste, pyrolysis technology in domestic and foreign countries, basic technology in pyrolysis process and new technology of pyrolysis developed in KIER (Korea Institute of Energy Research). The characteristics of process developed in KIER are the continuous loading treatment of mixed plastic waste with an automatic control system, the minimization of wax production by circulation pyrolysis system in non-catalytic reactor, the reuse of gas produced and the oil recovery from sludge generated in pyrolysis plant, which have greatly the advantage economically and environmetally. The experiment result data in 300 ton/yr pilot plant showed about 81 wt% liquid yield for 3 days continuous reaction time, and also the boiling point distribution of light oil (LO) and heavy oil (HO) produced in distillation tower was a little higher than that of commercial gasoline and diesel, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.1-16
• /
• 2007

The incineration process has commonly used for wastes amount reduction and thermal treatments of pollutants as the technologies accumulated. However, the process is getting negative public images owing to matter of hazardous pollutants emission. Specially dioxins became a main issue and is mostly emitted from municipal solid wastes incineration. In this reason, pyrolysis/gasfication/melting process is presented as a alternative of incineration process. The pyrolysis/gasfication/melting process, a novel technology, is middle of verification of commercial plant and development of technologies in Korea. But the survey about the pollutant emission from the process, and background data in these facilities is necessary. So in this survey, it Is investigated that the behavior of dioxins in three pyrolysis/gasfication/melting plant (S, T, P) of pilot scale. In case of S plant, concentration of dioxins shows high at latter part of cogenerated boiler and stack which are operate on low temperature conditions than a latter parts of pyrolysis and melting furnace which are operate on high temperature condition. Concentration of gas phage dioxins had increased after combusted gas passed cogenerated boiler and this is attributed to react of precursor materials such as chlorobenzene and chlorophenol. Concentration of dioxins in T plant showed lower levels at latter part of cooling equipment which are operate with water spray type on low temperature conditions than a latter parts of gasfied melting furnace which are operate on high temperature condition. Removal efficiency of dioxins at gas treatment equipment was 78.8 %. Concentration of dioxins in P plant was low at latter part of SDA/BF which is operate at low temperature conditions than a latter parts of pyrolysis gasfied chamber which are operate at high temperature condition. Removal efficiency of dioxins of SDA/BF was 85.9 % and therefore, it showed high efficiency at those of stoker type incineration facility. However, concentration of dioxins which emitted at high temperature condition were low in three facilities and satisfied present standard emission level of dioxins. To consider the distribution ratio of dioxins, Particulate phase dioxins at S and P plants showed similar ratio with which shows in current stoker type for middle scale domestic waste incineration facility. It is necessary to continuos monitoring the ratio of distribution of dioxins in T plant in because ratio of gas phage dioxins showed high.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.667-679
• /
• 2010

The distributed hydrologic model has been considerably improved due to rapid development of computer hardware technology as well as the increased accessibility and the applicability of hydro-geologic information using GIS. It has been acknowledged that physically-based distributed hydrologic model require significant amounts of data for their calibration, so its application at ungauged catchments is very limited. In this regard, this study was intended to develop a distributed hydrologic model (S-RAT) that is mainly based on conceptually grid-based water balance model. The proposed model shows advantages as a new distributed rainfall-runoff model in terms of their simplicity and model performance. Another advantage of the proposed model is to effectively assess spatio-temporal variation for the entire runoff process. In addition, S-RAT does not rely on any commercial GIS pre-processing tools because a built-in GIS pre-processing module was developed and included in the model. Through the application to the two pilot basins, it was found that S-RAT model has temporal and spatial transferability of parameters and also S-RAT model can be effectively used as a radar data-driven rainfall-runoff model.

• Journal of Radiation Protection and Research
• /
• v.38 no.2
• /
• pp.100-105
• /
• 2013

With the export of commercial nuclear power plants to UAE and that of a research reactor to Jordan, as well as the additional construction of domestic nuclear power plants, the demand of nuclear manpower is expected to increase sharply. Accordingly, nuclear manpower development is recently becoming an important issue. Major institutes involved in nuclear programs are well equipped with education and training procedures and resources. However, small and medium sized businesses have difficulties to educate their employees due to their limited resources and capacity for the education. Addressing the difficulties, this study is intended to develop and education course in accordance with the "Systematic Approach to Training (SAT)". For this, a survey is conducted on the need of education in small and medium sized businesses, based on which a pilot course on the basics of radiation is developed and operated. An assessment on the development and operation using a survey regarding participants response has shown high grades of performance, i.e. above 4.0 points (full mark: 5.0 points) on each level of expectancy, satisfaction and lecturers' capacity. The experience from this study will be used to develop other programs of nuclear power and ASME code, which are also identified from the need analysis.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.3
• /
• pp.165-173
• /
• 2015

This paper presents numerical results of static structural stability analysis in development of a vertical transfer device of a PRT(Personal Rapid Transit) vehicle. The vertical transfer of a fully occupied vehicle operating on a road network is the first attempt, which is expected to contribute to overcome the limitations of conventional 2-dimensional operation mode. In particular, the vertical transfer apparatus designed based on vertical circulating conveyors is capable of continuous transfer without time delay so that it enables to accommodate a high traffic density. This system has been frequently used in a logistics field; however, it is essential to assess a structural integrity because an external force by a vehicle weight is exerted on the conveyors in the form of a concentrated load unlike a conventional logistic transport. In this study, prior to the production process, the structural performance of the pilot design in an early stage is numerically evaluated using the commercial finite element method (FEM) solver (i.e., $Ansys^{(R)}$).

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.928-934
• /
• 2011

The objective of this study was to characterize the lactate metabolism and lipolysis in Emmental cheese made of Korean raw milk throughout the ripening periods; 14 d at $10^{\circ}C$, 42 d at $23^{\circ}C$, and 30 d at $4^{\circ}C$. Emmental cheese was made using a commercial starter culture with propionic acid bacteria (PAB) and without PAB as a control on the pilot plant scale. Changes in the contents of five organic acids (citric, lactic, formic, acetic, and propionic acid) and individual free fatty acids (FFAs) were measured using HPLC/PDA and GC/FID. As a result of propionic fermentation by PAB, the concentration of acetic acid and propionic acid increased up to 1.5 and 6.1 g/kg, respectively and the most dramatic increased occurred when incubated in the hot room ($23^{\circ}C$). Lactic, citric, and formic acid contents were 2.6, 2.5 and 0.8 g/kg at the end of ripening, respectively. As a result of lipolysis, the amount of total FFAs was 6,628.2 mg/kg. Compared to the control, levels of individual FFAs from butyric (C6:0) to linoleic (C18:2) acids increased significantly (p<0.05) during the ripening period. Especially, 65.1% of total FFAs was released in the $23^{\circ}C$ room and the most abundant FFAs were palmitic (C16:0), stearic (C18:0) and oleic acid (C18:1). These results demonstrated that the lipolysis of Emmental cheese was strongly affected by bacterial lipase from PAB.

• Journal of Nutrition and Health
• /
• v.37 no.8
• /
• pp.688-700
• /
• 2004

This study was conducted to analyze how appropriate the on-line nutrition information was externally as a web information. Four-hundred-ninety-seven web sites from 5 internet search engines (Yahoo, Empas, Nate, Hanmir, Naver) were selected on the basis of April 25th, 2004. The skillful personnels monitored them about 8 evaluating categories: clarity, purpose, authority, durability, advertisement, privacy and/or security, responsibility, and contents. Forty percent of the selected web sites were operated by the companies which had commercial purpose like internet shopping malls and 5.6% by academies, societies, research institutions, schools/colleges and public institutions. Most of web sites (76.1 %) were managed for advertisements and sales of companies' commodities, and 32.6% had the food and nutrition information as first purpose. Ninety-three percent of web sites were targeted to healthy individuals through whole life cycle. Specifically, there were lots of web sites for the obesity which were offered by diet related companies. Of the 497 web sites, 193 mentioned the name providing the nutrition information, but only 1/3 had reliability on their specialty. As a source of nutrition information, 52.7% of web sites were using 'books of the major field' and 42.0% 'newspapers' and 23.7% 'broadcasting', respectively. Most web sites mentioned 'setting-up date' but not 'renewal date'. Thirty-six percent of web sites took '2 - 3 days' for the operators to answer the questions through the bulletin. Forty-seven percent of web sites answered' 1 - 10 questions' per 1 week, but 40.1 % of them didn't answer for a week at all. There were 118 web sites (23.7%) to record the connected frequencies and 36.0% of them put the advertisements. Around 96% of web sites mentioned feedback addresses. Among the menus of web sites, 68.0% were about self-advertisement and 64.0% about nutrition information. Each web site was scored to judge its external quality according to the operators by selecting 13 items. Web sites managed by public institution had highest scores (9.5), and lowest in private vendors', food companies' and individual web pages. Among search engines, Naver got the highest score of 7.0 and Nate the lowest one of 6.1. As it was only the pilot study, there were several limits in evaluating tools, time and monitored quantity. To make monitoring of on-line nutrition informatiions actively, standardized monitoring forms might be developed under the integrated studies.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.352-360
• /
• 2012

Bacillus clausii I-52 which produced SDS- and $H_2O_2$-tolerant extracellular alkaline protease (BCAP) was isolated from heavily polluted tidal mud flat of West Sea in Incheon, Korea and stable strain (transformant C5) of B. clausii I-52 harboring another copy of BCAP gene in the chromosome was developed using the chromosome integration vector, pHPS9-fuBCAP. When investigated the production of BCAP using B. clausii transformant C5 through pilot-scale submerged fermentation (500 L) at $37^{\circ}C$ for 30 h with an aeration rate of 1 vvm and agitation rate of 250 rpm, protease yield of approximately 105,700 U/mL was achieved using an optimized medium (soybean meal 2%, wheat flour 1%, sodium citrate 0.5%, $K_2HPO_4$ 0.4%, $Na_2HPO_4$ 0.1%, NaCl 0.4%, $MgSO_4{\cdot}7H_2O$ 0.01%, $FeSO_4{\cdot}7H_2O$ 0.05%, liquid maltose 2.5%, $Na_2CO_3$ 0.6%). The enzyme stability of BCAP was increased by addition of polyols (10%, v/v) and also, the stabilities of BCAP towards not only the thermal-induced inactivation at $50^{\circ}C$ but also the SDS and $H_2O_2$-induced inactivation at $50^{\circ}C$ were enhanced. Among the polyols examined, the best result was obtained with propylene glycol (10%, v/v). The BCAP supplemented with propylene glycol exhibited extreme stability against not only the detergent components such as ${\alpha}$-orephin sulfonate (AOS) and zeolite but also the commercial detergent preparations. The granulized enzyme of BCAP was prepared with approximately 1,310,000 U/g of granule. Wash performance analysis using EMPA test fabrics revealed that BCAP granule exhibited high efficiency for removal of protein stains in the presence of anionic surfactants as well as bleaching agents. When compared to Savinase 6T$^{(R)}$ and Everlase 6T$^{(R)}$ manufactured by Novozymes, BCAP under this study probably showed similar or higher efficiency for the removal of protein stains. These results suggest that the alkaline protease produced from B. clausii transformant C5 showing high stability against detergents and high wash performance has significant potential and a promising candidate for use as a detergent additive.