• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.185-190
• /
• 2001

The severe shortage of the available sites in the highly developed downtown area in Korea necessitates the construction of high-rise buildings which meet the need of residence and commercial activity simultaneously. The objective of this study is to investigate the seismic performance of this type of building structures. For this purpose, two 1:12 scale 17-story reinforced concrete model structures were constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2-story frames with infilled shear wall have two different layouts of the plan : The one has symmetric plan and the other has unsymmetric plan. Then, this model was subjected to a series of earthquake excitations. The test results show that the layout of shear wall has the negligible effect on the natural period and the base shear coefficient, but great effect on the failure mode of beam-column joint at flexible side frame.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.406-409
• /
• 2005

Since 2003, Korean government has restricted landfill application of organic waste, which shares approximately 56% of total waste sludge from municipal and industrial wastewater treatment plants. In addition, enforcement of the ocean disposal prohibition law is effective from 2005. Organic sludge was composted for the purpose of converting to organic fertilizer. After moisture content was regulated with bulking agents aerobic treatment performed. When composting was conducted, commercial and activated microbe materials, identified from soil were seeded in sewage sludge. Carbon dioxide production was increased sharply after 24 hours. Temperature and pH of compost reached to $66.2^{\circ}C$ and 8. Heavy metals were lower than their regulatory limits, which enable it to utilize as organic fertilizer.

• Journal of Pharmaceutical Investigation
• /
• v.1 no.1
• /
• pp.47-52
• /
• 1971

Application of the spectrophotometer to the analysis of 17 ${\alpha}-ethinyl$ estradiol and $17{\alpha}-ethinyl-19-nortestosterone$ acetate mixture in oral contraceptive has been accomplished. It is used Beckman Du Spectrophotometer as a apparatus. The petroleum ether extract of ethinyl estradiol is determined at $535\;m{\mu}$ and the chloroform extract of norethindrone acetate is determined at $380\;m{\mu}$ respectively. This analytical method is formed Lambert Beer's law. This method can be used to the analysis of ethinyl estradiol aid norethindrone acetate mixture in commercial dosage form of routine assay.

• Computers and Concrete
• /
• v.9 no.5
• /
• pp.341-355
• /
• 2012

Numerical studies are performed to predict the stress-strain behavior of rectangular RC columns confined by multi-spiral hoops under axial and eccentric compressions. Using the commercial finite element package ABAQUS, the Drucker-Prager criterion and the yield surface are adopted for damaged plasticity concrete. The proposed finite element models are compared with the published experimental data. Parametric studies on concrete grades, confinement arrangement, diameter and spacing of hoops and eccentricity of load are followed. Numerical results have shown good agreements with experimental values, and indicated a proper constitutive law and model for concrete. Cross-sectional areas and spacing of the hoops have significant effect on the bearing capacity. It can be concluded that rectangular RC columns confined by multi-spiral hoops show better performance than the conventional ones.

• The Journal of Industrial Distribution & Business
• /
• v.4 no.1
• /
• pp.11-14
• /
• 2013

Purpose - The objective of this paper is to explain how the Chinese distribution market will continue to bring tremendous business opportunities to commercial enterprises given the relatively strong economic fundamentals and substantial government-led measures for boosting domestic demand. Research design, data, and methodology - The study conducted a survey on China's 2011 retail market data. After empirically analyzing the data on retail sales, online retail markets, and franchises, we believe that online retailing in China will maintain its growth momentum. Results - This study shows that 2012 is expected to be a challenging year for the retail sector, as both external and internal pressures are likely to persist. Some of the major challenges facing retailers in China are mentioned below. Conclusions - Retailers in China face several major challenges. First, the uncertain economic outlook is having a considerable impact on China's retail market. Second, China's retailers face an unfair competition environment. Third, they are suffering the impacts of product safety problems.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.149-154
• /
• 1993

Authors investigated on the content of tin metals in 108 samples of tinplated canned fruit commercial. 1. The highest concentration of tin in 11 kinds of samples of canned fruit that is, apricot nectar was 114ppm and lowest of that 2.5∼3ppm. 2. There was 48.6ppm of tin content in orange nectar A that of pineapple nectar 56.6ppm in higher remarkably and that of the other samples was no appearance difference. 3. There was 114ppm(number 10), 5.3∼56.6ppm(number 8) and 8.7∼48.6ppm(number 3) of tin content in minimum between maximum concentration for difference remarkably and that of others there was no difference considerably, The highest concentration in detection frequency of content range was 8∼ 14ppm in 41. 7% and 2.5"6.6ppm in 36.1% and that of concentration was lower for comparison the others. 5. There was lower contration of tin in all samples for law of food hygiene in limitation 150ppm.

• Journal of Arbitration Studies
• /
• v.26 no.4
• /
• pp.63-82
• /
• 2016

In order to cope with the changes of International Commercial Arbitration, the Shanghai International Economic and Trade Arbitration Commission (SHIAC) regulated an Emergency Arbitrator for the first time, implementing the arbitration rules in China (Shanghai) Pilot Free Trade Zone on May 1, 2014. Moreover, the China International Economic and Trade Arbitration Commission (CIETAC) also regulated the Emergency Arbitrator in the revised arbitration rules on January 1, 2015. However, it caused considerable contradiction that SHIAC and CIETAC admitted an interim measure decision by the Emergency Arbitrator under the circumstance that the Chinese court can impose a preservative measure in the Civil Procedure Code (CPC) and Arbiration Act. This study attempted to compare the main contents of an Emergency Arbitrator regulated in the arbitration rules of SHIAC and CIETAC with arbitration rules of representative arbitral institutions which operate an Emergency Arbitrator. In addition, this study verified the application features and problems through comparing the rule of SHIAC and CIETAC with the rule related to the preservative measure in Chinese law.

• Transactions of Materials Processing
• /
• v.24 no.5
• /
• pp.323-331
• /
• 2015

Impact extrusion is an economical and productive process that can replace the multistage deep drawing process for producing deep rectangular cases. In the current work, a three-dimensional finite element analysis of the impact extrusion process of a commercial purity aluminum alloy (AA1070) was performed to predict loads, material flow, and deformed shapes using the Hansel-Spittel rheology law, which describes the flow stress at various temperatures and strain rates. The role of various process parameters such as friction, clearance between punch and die, aspect ratio and thickness of billet on the process and the shapes was analyzed.

• International Commerce and Information Review
• /
• v.9 no.4
• /
• pp.177-198
• /
• 2007

Since 1970s, there are many tries to realize electronic bills of lading(e-B/L) in the world and great attention has been shown to the question of law, international trade customs and realizing strategy concerned that instrument. However that tries, include Bolero which is most famous company serving e-B/L, don't succeed yet. Meanwhile, Korean government amended commercial code in order to realize e-B/L on August 3, 2007. Also The Korea Paperless Trade Center set to develop the e-B/L system by spring of 2008. So far, however, no definitive answer has been given to the way of realization of e-B/L in Korea. Getting bigger the importance of analysis to the ways of realization of e-B/L in Korea, in this paper the author attempt to examine the requirements after briefly outlining and analysing the results and problems of the tries and suggest thereby policy and strategy about the realization classified three categories.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.135-139
• /
• 1992

Control of tool-environment interaction force to comply the robot system to an environment is of vital in many automated process. This paper presents the implementation of an adaptive force control with commercial robot system in two dimensional contour following task. A model reference adaptive control system, combined with the linear compensators, is implemented. That is, a use of adaptive control is to provide an auxiliary control system so that the contour following performance can be improved from that of using linear control system only. Hyperstability is used to derive the adaptive control law. Experimental verification of the proposed control system is obtained using PUMA 560 robot system. Data obtained experimentally shows that the use of additional adaptive control system improves the contour following performance about 30% in RMS contact force errors upon that of the system controlled by the linear compensators only.