• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.309-310
• /
• 2014

Commercial gas burning appliances are classified by KGS AB338. Even though there are many types of gas appliances with different purposes and uses, common standards are applied to the appliances. Manifold of commercial gas range could often be corroded by salt water. Gas leaks and accidents could be occurred by the corrosion. According to suggestion of detailed material standards for manifold of commercial gas range, it could help to use safely and prevent gas accidents.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.568-572
• /
• 2003

The height of valve body is limited to 30mm in the cook-top style gas valves for the domestic gas ranges. But the all the safety specifications of KS should be fulfilled and the magnetic power unit(MPU) should be installed in the valve body for the safety reason. The length of MPU body is longer than the 30mm that it should be located in the square direction of the knob shaft and therefore the implementation of the lever mechanism to transmit the press motion of the knob to the MPU valve is very difficult. In this paper, the hinged lever with inclined plate is used to transmit the press motion of the knob to the MPU valve. The analysis of the gas flow with using the commercial software of FLOW-3D shows that the gas flow capacity is fit for the domestic gas range. The performance and responsibility of the valve is tested for the mass production and the test results shows that the valve can be installed in the commercial gas range.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2228-2231
• /
• 2007

Water gas shift reactor in fuel processing is an important part that converts carbon monoxide into hydrogen. Fuel processing system for PEMFC usually has two stages of WGS reactors, which are high temperature and low temperature shifter. In this study we prepared noble metal catalysts and compared their performances with that of a commercial iron chromium oxide catalyst. Noble metal catalysts and the commercial catalyst showed quite different temperature dependence of carbon monoxide conversion. The conversion of carbon monoxide at the commercial catalyst was very low at medium temperature(${\sim}300^{\circ}C$) and increased rapidly as temperature increased while the conversion at noble metal catalysts was high in the medium temperature range and decreased as temperature increased, which is thermodynamically expected. Their characteristics agreed well with the literature published, and we are accomplishing further study for improvement of the noble metal catalysts.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.118-125
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quality alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70 t/y and the pilot plant of 360 t/y had been developed. Main research contents in this step were the process performance test of pilot plant of 360 ton/year and the development of demonstration plant of 3,000 t/y, which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/y showed about 80% yield of liquid product, which was obtained by both light gas oil(LGO) and heavy gas oil(HGO), The boiling point range distribution of LO product that was mainly consisting of olefin components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.57-62
• /
• 2010

MW-class gas turbines are suitable for distributed generation systems such as community energy systems(CES). Recently, biogas is acknowledged as an alternative energy source, and its use in gas turbines is expected to increase. Steam injection is an effective way to improve performance of gas turbines. This study intended to examine the influence of injecting steam and using biogas as the fuel on the operation and performance a gas turbine combined heat and power (CHP) system. A commercial gas turbine of 6 MW class was used for this study. The primary concern of this study is a comparative analysis of system performance in a wide biogas composition range. In addition, the effect of steam temperature and injected steam rate on gas turbine and CHP performance was investigated.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.820-824
• /
• 2004

An optical purity test was indirectly performed on (S)-ibuprofen as its diastereomeric (R)-(+)-1-phenylethylamide derivative using achiral gas chromatography (GC). The method for the determination of trace (R)-ibuprofen (optical impurity), within the range 1.0 to 50 ng, from a racemic ibuprofen standard was linear (r＝0.9997) with acceptable precision (％ $RSD{\leq}5.3$) and accuracy (％ RE＝0.7~-3.9). Similar results were obtained with the method validation for the quantification of (S)-ibuprofen within the range 0.1 to 2.0 $\mu\textrm{g}$ using a (S)-ibuprofen stan-dard. When applied to seven different commercial (S)-ibuprofen products, their optical purities (98.7~99.1％) were determined with good precision (％ $RSD{\leq}4.0$).

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.439-444
• /
• 2008

The oyster shell adsorbents were prepared by steam activation method to evaluate their adsorption characteristics. Washed and pulverized waste oyster shells were prepared by steam activated process in converter at the temperature range of about $700{\sim}800^{\circ}C$ after carbonized at the range of $600{\sim}1000^{\circ}C$. The shell carbonized at $1000^{\circ}C$ showed the best performance among those of other temperature ranges. Also, comparison between gas and liquid phase adsorption was performed to verify adsorbent possibility of waste shell. In case of gas phase, the adsorbent showed lower performance than existing commercial adsorbents. On the other hand, the liquid phase, they showed similar adsorption performance to commercial adsorbents when benzene was used.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.511-514
• /
• 2007

Gas hydrate has a unique property that can store a large volume of gas in water as a solid form. Even though investigations for natural gas storage technology have been carried out for several decades, there are still a lot of unsolved problems due to complex formation process, low formation speed, high energy consumption and so on. So, lots of experiments were conducted to overcome these weaknesses and to develop artificial NGH formation technology applicable to industrial-scale storage and commercial transport. In this study, some series of experiments were performed to analyze both stirred and unstirred system especially about the influences of several gas hydrate formation factors such as agitation speed, system temperature, SDS concentration, etc. As a result, optimum range of SDS concentration and temperature that could enhance the storage capacity and shorten the formation time were found. And it is obviously presented that SDS such a kind of surfactant promotes gas hydrate formation dramatically and the quantity of stored gas are proportional to agitation speed in stirred system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.87-97
• /
• 2013

Recently the use of gas spring in the combat and commercial vehicle's suspension is increasing. Because of its nonlinear characteristics, the gas spring can support wide range of dynamic loads and gives good ride quality. In design of gas spring, isothermal and adiabatic processes are applied generally, but those processes could not produce heat transfer effect in the simulation. So in this study, heat transfer differential equation and BWR/Ideal state equation are used to calculate the pressure of gas spring which is changing with time. The numerical analysis showed that the pressure of gas spring forms a hysteresis loop in the both of the state equations. But the peak pressure value of BWR equation over 0.1Hz frequency are higher than that of adiabatic process. And the test results showed that the differences between test results and ideal gas equation are smaller than those of BWR equation, so the ideal equation is more accurate than BWR equation in this case.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.465-473
• /
• 2011

To find the optimum mixing ratio of WGS catalyst with $CO_2$ absorbent for SEWGS process, water gas shift reaction tests were carried out in a fluidized bed reactor using commercial WGS catalyst and sand (as a substitute for $CO_2$ absorbent). WGS catalyst content, gas velocity, and steam/CO ratio were considered as experimental variables. CO conversion increased as the catalyst content increased during water gas shift reaction. Variations of the CO conversion with the catalyst content were small at low gas velocity. However, those variations increased at higher gas velocity. Within experimental range of this study, the optimum operating condition(steam/CO ratio=3, gas velocity = 0.03 m/s, catalyst content=10 wt.%) to get high CO conversion and $CO_2$ capture efficiency was confirmed. Moreover, long time water gas shift reaction tests up to 20 hours were carried out for two cases (catalyst content = 10 and 20 wt.%) and we could conclude that the WGS reactivity at those conditions was maintained up to 20 hours.