• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.34-41
• /
• 1996

The heat of evaporation (cold energy) of LNG is the energy consumed in the production of LNG. This energy amounts to 14% of the NG. In Pyungtak LNG terminal, it is about 96 MW in 1993. In order to utilize the cold energy, the cold power generation systems are investigated: The Rankine cycle using the low temperature energy, the partial expansion cycle using the pressure energy, and the Linde process which is a combined cycle of the Rankine and the partial direct expansion cycle. The commercial simulator, ASPEN Plus, is used. The conceptual design data are obtained from the current facilities of the Pyungtak LNG terminal. The performances of three systems are evaluated. The amount of electric power ranges iron 3 MW to 6MW. The optimum energy efficiency is about 37%. The optimum design conditions are obtained for the partial direct expansion (PDE) cycle. The performance of the PDE cycle is supposed to be comparable to that of the Rankine cycle if the areas of the total heat exchanger of the both cycle are equal.

• Journal of the Korean housing association
• /
• v.24 no.5
• /
• pp.57-67
• /
• 2013

The purpose of this study is to find out distributional principles of the shop-houses in residential district through physical composition of residential area. Through the research that are based on literature and field survey, it analysed the relation between physical composition of residential area and the shop-houses of selected four sites under similar urban condition where land readjustment project were held. The consequences of this study are summarized as follows; 1) A road that is not penetrating the inside a residential area is seemed to have low occupancy of shops comparing to other roads with similar hierarchy. And the shops functions as convenience facilities. It can be inferred from the statement above that even a road with higher hierarchy is not easy to form commercial area if without penetrating the residential area. 2) According to the size and the arranged method of Inner blocks of residential area towards major roads, distribution of shop-houses appear to be different. In other words, when shop-houses are located along the roads, the proportion of shop was higher than when located perpendicular to the roads. 3) When the number of average lots are little and the size of block is small, usually, street ratio and the number of corners gets higher, which eventually increases the number of shop-houses.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.571-574
• /
• 1997

Attempts were made in the laboratory to produce bypass fat using acid oil by precipitation and fusion methods. The degree of saponification by both of these methods was above 80 percent. Where heating facilities are not available, precipitation method could be used, otherwise, fusion method of bypass fat production is found to be more convenient, especially for commercial scale operations as handling of large volume of solutions is eliminated. Bypass fat thus produced was tested in vitro for rumen fermentation. Incorporation of acid oil in the incubation medium reduced TVFA conc. from 127.06 to 124.09 mM/l SRL and increased ammonia-N levels from 210.50 to 223 mg/l SRL indicating that the microbial activity was affected on incorporation of acid oil in the incubation medium. However, incorporation of bypass fat in the incubation medium did not significantly affect TVFA conc. as well as ammonia-N levels. In another experiment, nine rumen fistulated sheep in three groups of three each were fed bypass fat at two different levels. Dry matter disappearance in 24 h from the nylon bags suspended in the rumen of animals under different groups was found to be $47.74{\pm}1.10$, $47.55{\pm}0.21$ and $50.74{\pm}1.11$ in group I (control), group II (fed bypass fat 50 g/day) and group III (fed bypass fat 100 g/day), respectively. These studies indicated that it is possible to produce bypass fat from acid oils, a by-product of oil refining process, and its feeding did not affect rumen fermentation.

• Korean Institute of Interior Design Journal
• /
• v.18 no.4
• /
• pp.3-10
• /
• 2009

Domestic distribution market is in a time of transition for the present. With consumers' diverse demands, the growth of department stores, shopping malls, specialized shops and so on has been taken place radically and the competition among them also has become severe. In order to promptly and positively cope with the radically changing trend of market and the generation of competing business entities, they are necessary to establish a discriminated indoor space plan. With such desires as the expansion of leisure activities based on the increase of personal income and the up-gradation, diversification and individualization of living standard based on economic growth, the dining-out space, one of people's life environments, need a variety of changes. In the past, the specialized restaurants of composite shopping malls and department stores were a mere mediating space of food sale between producers and consumers, but today they become a discriminated and creative indoor space which representing customers' lifestyle. The purpose of this study was to examine the characteristic of public space of specialized restaurants at composite shopping malls and department stores and then present a discriminated spatial marketing strategy in order to find out the direction of its proceeding in the future. Therefore, the purpose of this study was to work out basic data for the development of dining-out contents at the time of appearing diverse composite dining-out spaces in the future and of establishing a renovation plan of specialized restaurants at composite shopping malls and department stores in order to provide customers a space which could satisfy their desires. In this vein, the characteristic and composition of necessary space was analyzed based on the examination of cases. The investigator hopes that study findings are used as basic data for the study on the interrelationship between the sale space and dining-out space of composite commercial facilities and for the establishment of marketing strategy to attract customers.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.85-90
• /
• 2013

This study is an attempt to quantify rainwater utilization and miscellaneous water demand in Tokyo's 23 special wards, the core of the urban area in Tokyo, Japan, in order to elucidate the potential of further rainwater utilization. The rainwater utilization for miscellaneous appropriate water demands, including toilet flushing, air conditioning, and garden irrigation, were calculated for six different types of building: residential house, office, department store, supermarket, restaurant, and accommodation. Miscellaneous water demands in these different types of building were expressed in terms of equivalent rainfall of 767, 1,133, 3,318, 1,887, 16,574, and 2,227 (mm/yr), respectively, compared with 1,528 mm of Tokyo's average annual precipitation. Building types, numbers and its height were considered in this study area using geographic information system data to quantify miscellaneous water demands and the amount of rainwater utilization in each ward. Area precipitation-demand ratio was used to measure rainwater utilization potential for miscellaneous water demands. Office and commercial areas, such as Chiyoda ward, showed rainwater utilization potentials of <0.3, which was relatively low compared to those wards where many residential houses are located. This is attributed to the relatively high miscellaneous water demand. In light of rainwater utilization based on building level, the introduction of rainwater storage mechanisms with a storage depth of 50 mm for six different types of buildings was considered, and calculated as rainfall of 573, 679, 819, 766, 930, and 787 (mm), respectively. Total rainwater utilization using such storage facilities in each building from 23 wards resulted in the retention of 102,760,000 $m^3$ of water for use in miscellaneous applications annually, and this volume corresponded to 26.3% of annual miscellaneous water demand.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.3
• /
• pp.71-81
• /
• 2017

Organic dust generated inside livestock facilities includes toxic organic matters such as bacteria and endotoxin. Dust can cause respiratory disease for worker and livestock, and consequently, degradation of welfare and productivity. Influence of dust on livestock workers has been studied since the 1970s. However, exposure limit for cattle farmer has not been established, unlike exposure limit for pig and poultry farmer. Furthermore, study on air quality inside livestock facility, especially inside dairy farm has been rarely conducted in Korea. In this study, dust concentration of TSP, PM10, inhalable and respirable dust has been monitored in the commercial dairy house according to location and working activities. Bedding material inside the stall was one of the major sources of dust. The amount of dust was related to water content level of the bedding material. Dust concentration was relatively high in leeward location, and the highest concentration was measured during TMR mixing process. The maximum value of inhalable dust concentration was 29.1 times higher than the reference value as fine particles drop to the TMR mixer. Dust generated by TMR mixing was presumed to decrease by adjusting moisture and drop height of feed.

• Smart Media Journal
• /
• v.9 no.1
• /
• pp.67-74
• /
• 2020

As the demand of electric vehicles has been increased recently, their related industries are developing. In particular, the market of electric vehicles charging infrastructure is expanding rapidly and users have much demand in convenience of electric vehicles charging site. Because an charging site using electric pole of KEPCO can make use of that installed nearby public parking lots, there are many commercial construction and convenient facilities near around it. In this situation, users can do shopping or their personal business during charging. In this paper, we proposed the design of charging platform for electric vehicles to support LBS for users to do shopping or personal business conveniently.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.581-594
• /
• 2014

A feasibility study on the seismic design of nuclear reactor buildings with application of a seismic isolation system is introduced. After the Hyogo-ken Nanbu earthquake in Japan of 1995, seismic isolation technologies have been widely employed for commercial buildings. Having become a mature technology, seismic isolation systems can be applied to NPP facilities in areas of high seismicity. Two reactor buildings are discussed, representing the PWR and BWR buildings in Japan, and the application of seismic isolation systems is discussed. The isolation system employing rubber bearings with a lead plug positioned (LRB) is examined. Through a series of seismic response analyses using the so-named standard design earthquake motions covering the design basis earthquake motions obtained for NPP sites in Japan, the responses of the seismic isolated reactor buildings are evaluated. It is revealed that for the building structures examined herein: (1) the responses of both isolated buildings and isolating LRBs fulfill the specified design criteria; (2) the responses obtained for the isolating LRBs first reach the ultimate condition when intensity of motion is 2.0 to 2.5 times as large as that of the design-basis; and (3) the responses of isolated reactor building fall below the range of the prescribed criteria.

• Journal of Digital Convergence
• /
• v.9 no.5
• /
• pp.55-63
• /
• 2011

The purpose of this study is analyzes the violate behavior the Parking Area for the handicapped and monitor the management problem, therefore presents the improvement alternatives of it. We use the field interview survey method by visiting the government office of cities of 16, commercial facility, housings, medical centers, cultural and sports facilities, express highway rest area. We visited the 50 places and interviewed the 227 violating persons. As a result, violate behavior is divided into the not attachment of sticker on parking possibility and not accompaniment with walking disabled person. We presented the improvement alternatives for the lawful usage of the parking area for the handicapped. First, We have to magnify a recognition and a advertisement about the parking area for the handicapped. Second, We have to improve a management of expense, manpower and civil complains, etc. We have to prepare the legal revision which strengthens the concrete punishment for a violate behavior improvement.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.8
• /
• pp.57-64
• /
• 2016

Initial prevention activities and rapid propagation conditions is the most important to prevent diffusion of water pollution. If water pollutants flow into streams river or main stresm located in environmental conservation area or water intake facilities, we must predict immediately arrival time and the diffusion concentration to the proactive. National Institute of Environmental Research developed water pollution incident response prediction system linking dam and movable weir. the system is mathematical model which is updated daily. Therefore it can quickly predict the arrival time and the diffusion concentration when there are accident of oil spills and hazardous chemicals. Also we equipped with mathematical model and toxicity model of EFDC(Environmental Fluid Dynamics Code) to calculate the arrival time and the diffusion concentration. However these systems offer the services of an offline manner than real-time control services. we have ensured the reliability of data collection and have developed a real-time water quality measurement data transmission device by using the data linkage utilizing a mode bus communication and a commercial SCADA system, in particular, we implemented to be able to do real-time water quality prediction through information infrastructure of the water quality integrated management business created by utilizing the construction of the real-time prediction system that utilizes the data collected, the Open map, the visual representation using charts API and development of integrated management system development based on web maps.