• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.493-497
• /
• 2011

The basic properties and electrical characteristics of sputtering films deposited with a commercial cast target and spark plasma sintering (SPS) were compared and analyzed. The results, revealed that, the Al film prepared by heating at $60^{\circ}C/min$ (SPS process) showed a specific resistance similar to the commercial cast Al film. In addition, the results of XRD, SIMS and TEM, showed that there was not much difference in the crystal structure and impurities between the two films. Consequently, the SPS Al target was found to have properties quite similar to the commercial one and it is expected to be applied in future research to the metal wiring material for semiconductor/display devices.

• Food Science of Animal Resources
• /
• v.34 no.5
• /
• pp.709-716
• /
• 2014

The objective of this study was to compare the characteristics that define the quality of Woorimatdag$^{TM}$ (WM, a certified meat-type commercial Korea indigenous chicken breed) and a commercial broiler breed (Ross, CB). Two hundred WM and 200 CB chickens that were 1-d-old and mixed sex were obtained from a commercial hatchery and randomly assigned to floor pens (20 chickens per pen, $3.0{\times}2.0m$) and raised under the same environmental conditions. WM breast meat contained significantly higher crude protein and ash as well as lower crude fat than CB breast meat (p<0.05). WM breast meat had slightly higher alanine, histidine, isoleucine, and glycine as well as lower phenylalanine content than CB breast meat (p<0.05), and the WM breast meat had a low ratio of unsaturated to saturated fatty acid composition (p<0.05). However, arachidonic acid composition was higher in the WM than the CB breast meat. In addition, the inosin-5'-monophosphate content was also higher in the WM compared with the CB breast (p<0.05). The WM breast meat had higher total collagen content compared with CB breast meat. WM soup taste received higher scores with regard to sensory evaluation compared with CB soup (p<0.05). From these results, we conclude that higher amount of protein and flavor precursors and lower amount of fat in the breast meat of WM could be attractive by consumer when compared with CB.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.5
• /
• pp.522-526
• /
• 2014

Pyropia, economic red algae species, have been cultivated in Korea (referred to as 'gim'), Japan ('nori'), and China ('zicai') for over 300 years. Vegetable seaweed Pyropia species are sold in the public markets in various forms as commercial seafoods. In Korea, two kinds of Pyropia seafood made with species of Pyropia and Ulva (sea lettuce, referred to as 'parae') are also sold. These are referred to as 'parae-gim' (with Pyropia spp. and U. linza) and 'gamtaegim' (with Pyropia spp. and U. prolifera). There is currently no method for identifying the seaweed species that comprise Pyropia seafood products. Therefore, we developed novel molecular markers to identify Ulva species in commercial Pyropia seafoods. Based on rbcL molecular markers, we identified informative characteristics to discriminate U. linza and U. prolifera as seafood ingredients. Moreover, PCR with 3'-end mismatch primers successfully isolated the specific rbcL sequences of U. linza and U. prolifera from Pyropia seafoods. Therefore, our novel molecular markers will be useful for identifying the ingredient species of commercial seafoods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.371-379
• /
• 2015

This paper represents the structural design of the light weight axle beam for medium duty commercial vehicle using hot press. To reduce the weight of the axle, axle beam of solid type was replaced by hollow type which was made by hot press. According to the change of axle beam structure and manufacturing method, we have to investigate the structural strength and fatigue performance. To verify the axle beam performance, the structural analysis was carried out by simplified axle beam model and various design parameters that are axle beam height, thickness and width. From the analysis results, the light weight axle beam structure was founded and applied the full model analysis. This study will be used as a guidance in development of the light weight axle for medium duty commercial vehicle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.205-208
• /
• 2002

The use of chopped sugarcane stalk (CSS) as a roughage for lactating cows was examined using four Holstein crossbred cows in a private dairy farm in Khon Kaen, Thailand, in comparison with rice straw (RS), which is the conventional roughage in the dry season in the region. Cows were subjected to the following two dietary treatments: Diet 1) RS with commercial concentrate feed, and Diet 2) CSS and RS with commercial concentrate feed. The diet was switched over every 3 weeks. The amount of concentrate was determined by the experience of the owner of the cows. RS and CSS were given ad libitum. There was no difference in milk production between two groups, although the total DMI was less in cows fed CSS. Solid-not-fat (SNF) content in milk was significantly higher in the cows given CSS. The NEFA content was significantly lower in the animals given CSS, which suggested that cows given only RS as roughage would be suffering from energy malnutrition. Therefore, it was considered that CSS feeding improved energy supply, which resulted in higher SNF in milk. In the nutritional point of view, the present study clearly showed CSS can be used as a roughage for dairy cows in the dry season.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.414-424
• /
• 2010

This report describes recent advances in tissue culture, genetic transformation of commercial rose (Rosa hybrida) and in development of new rose cultivars by molecular breeding. Rose is one of major cut-flowers in global horticulture industry. Successful progresses were made in development of new cultivars for pathogen resistant, environmental stress resistant and petal color modification by molecular breeding. New cultivars, however, has not reported yet in korea, although lots of progresses were achieved in each field of conventional breeding, tissue culture and genetic transformation. Cooperation in these research fields will promote screening of useful genes to have specific traits on rose and exploiting of processes to improve in the efficiency of tissue culture and genetic transformation of rose, therefore, we hopefully expect that new rose cultivars by molecular breeding will be released in the near future.

• Journal of Arbitration Studies
• /
• v.20 no.2
• /
• pp.27-47
• /
• 2010

It is well recognized that the availability of prompt, effective and economical means of dispute resolution is an important element in the orderly growth and encouragement of international trade and investment. Increasingly, arbitration, instead of litigation in national courts, has become the preferred means of resolving private international commercial disputes. Under the situation, it will be important thing for arbitral institutions to reach an agreement to promote the dispute settlement of the commercial disputes, for which efforts have been made between the Korean Commercial Arbitral Board(KCAB) and principal arbitration institutions of the foreign countries. Since 1973, the KCAB has entered into many arbitration agreements with well-known foreign institutions of arbitration. If the place of arbitration is not so designated by the parties, it, as a general rule, shall be the country of the respondent(s) under the Korea-Japanese Arbitration Agreement. On the other hand, the U.S.-Korean Commercial Arbitration Agreement maintains 'Joint Arbitration Committee which finally decide the place of arbitration. In 1996, the Korea-Austria Agreement of Cooperation was concluded for the prompt and equitable settlement on an amicable basis of commercial disputes. Under this Agreement, arbitral institutions between Korea and Austria agreed to act as an appointing authority in accordance with the UNCITRAL Arbitration Rules. It is also very important for Korea and China including North Korea to cooperate each other for the settlement of the commercial disputes within the Pan Yellow Sea Economic Bloc(PYSEB). The PYSEB is quickly becoming a distinctive and crucial region in the world sharing geographical proximity, many common historical experiences, and similar cultural norms and values although they have disparities in stages of development, trade and economic policies, and financial and legal frameworks. Finally, it should be considered to establish a central common system for settlement promotion of the commercial disputes within the PYSEB through the arbitration agreement. Such a dispute resolution system was already introduced and established within the area of the NAFTA, and it is called the Commercial Arbitration and Mediation Center for the Americas(CAMCA).

• Journal of Distribution Science
• /
• v.17 no.6
• /
• pp.43-56
• /
• 2019

Purpose - With the increasing number of small business owners who reports the cessation of their businesses, the rate of closing the business within the year is increasing as well. The efforts have been made continuously to revitalize the business through the inflow of government or private capital. Maintaining the fast-changing commercial districts with the existing support is difficult, so it is urgent state that needs for commercial district reorganization. The differentiate aspect is that this new measures for small-block-unit commercial modeling can be introduced to promote these aging/deposit private-owned shops politically. Research design, data, and methodology - This study is to develop a sustainable theme shopping rehabilitation method which considers the characteristics of local cities based on the case studies of developed countries' commercial areas to revitalize the central urban areas of local cities. Results - The purpose of this study as stated above is to manage the local commercial area through the program that purchases the empty stores, and the measure to secure the autonomy among stores. Conclusions - The government should concentrate on projects such as vacant store purchase programs, which are omitted from past achievements, and maximize the effect of the project through inter-departmental project packages.

• Journal of Distribution Science
• /
• v.14 no.10
• /
• pp.29-38
• /
• 2016

Purpose - This research examines the effects of local universities on urban regeneration to recover commercial supremacy in the original urban area and provides clear information on the "University Cooperation Project for Traditional Market." Research design, data, and methodology - The "University Cooperation Project for Traditional Market" started in 2015. This study was conducted focusing on 22 places selected in 2015 and the project content in those locations. Results - This study analyzes the link to urban regeneration and spreads the concept along with theoretical consideration of university cooperation for traditional markets. Additionally, it promotes policies to help propel the project based on characteristics of the region. Conclusions - A differentiated project should be created, with characteristics of the region reflected, and detailed programs developed and implemented resulting in meaningful achievement from the perspective of members of the local community, who may have deviated from existing perspectives. Additionally, opportunities should be established for the direct application of young consumer ideas through experimental business to regenerate the traditional market (commercial supremacy), the center of the local economic society.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.1
• /
• pp.50-55
• /
• 2013

When it comes to commercial vehicles, their unique characteristics - center of gravity, size, weight distribution - make them particularly vulnerable to rollover. On top of that, conventional heavy vehicle brake exhibits longer actuation delays caused in part by long air lines from brake pedal to tires. This paper describes rollover prevention algorithm that copes with the characteristics of commercial vehicles. In regard of compensating for high actuating delay, predicted rollover index with short preview time has been designed. Moreover, predicted rollover index with longer preview time has been calculated by using road curvature information based on environment information. When rollover index becomes larger than specific threshold value, desired braking force is calculated in order to decrease the index. At the same time, braking force is distributed to each tire to make yaw rate track desired value.