• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.194-196
• /
• 2005

The command processor in satellite handles the capability of the process of command transmitted from ground station and deliver the processed data to on board computer in satellite. The command processor is consisted of redundant box to increase the reliability and availability of the capability. At each command processor, the processing time of each command processor is different, so the mismatch of processing time makes it difficult to timely synchronize the reception to on board computer and even will be became worse under the command processor's fault. To minimize the tine loss induced by the command processor's fault on board computer must analyze the time distribution of command propagation. This paper presents the logic of minimizing the delay error of command propagation the logic of analyzing the output of command processor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.95-100
• /
• 2003

Electronic equipment used in satellites are demanding extremely high reliability, so they should be designed to have immunity for some critical faults by using redundancy component. Generally, Communication satellites are assigned to meet the 15 years mission lifetime, of the analysis about faults must be performed to electronic equipments of satellite. This paper is a summary of the fault tolerance design research of command processor, the improvement of reliability and trade-off study of fault tolerance design result. The reliability prediction value of the satellite component used in this research was taken from Koreasat 3 and Kompsat 1. It is important to perform many trade-off studies for fault tolerance design, especially to choose the most proper fault tolerance method for the specified fault scenario.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.51-57
• /
• 2001

How to promote students interest is very important in undergraduate engineering education. One of the techniques for achieving this is select appropriate projects and to integrated them with regular courses. In this paper, a voice recognition system for autonomous robots is proposed as a project to educate students about microprocessors efficiently. The proposed system consists of a microprocessor and a voice recognition processor that can recognize a limited unmber of voice patterns. The commands of autono-mous robots are classified and are organized such that one voice recognition processor can distinguish robot commands under each directory. Thus. the proposed system can distinguish more voice commands than one voice recognition processor can. A voice com-mand systems for three autonomous robots is implemented with a microprocessor Inter 80CI196KC and a voice recognition processor HM2007. The advantages in integrating this system with regular courses are also described.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.449-458
• /
• 2022

In a power plant, the utility operates controllers include safety program that has performed several stages verification to prevent accidents in preparation for accidents, or to stably operate in accident. This paper describes the virtualization technology so that the verified binary operating system and application program can operate on the controller processor used in the power plant safety control facility. The technology applied to this virtualization processor uses commercial tools to implement the essential components for the operation of the safety-grade controller processor module, such as command interpreters and analyzers, and the virtualization platform was developed in a Linux-based operating system using the Imperas Tool. In addition, it was checked whether the implemented virtual processor module can normally interpret and execute binary-type instructions.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.364-367
• /
• 2004

This paper presents the flight software of KoDSat (KSLV-l Demonstration Satellite) which performs demonstrating the KSLV-l (Korea Space Launch Vehicle-l)'s satellite launch capability. The KoDSat Flight Software executes in a single-processor, multi-function flight computer on the spacecraft, the OBC (On Board Computer). The flight software running on the single processor is responsible for all real-time processing associated with: processor startup and hardware initialization, task scheduling, RS422 handling function, command and data handling including uplink command and down-link telemetry, attitude determination and control, battery state of charge monitoring and control, thermal control processing.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1322-1328
• /
• 2010

Recently, keyword spotting system is greatly in the limelight as UI(User Interface) technology of ubiquitous home network system. Keyword spotting system is vulnerable to non-stationary noises such as TV, radio, dialogue. Especially, speech recognition rate goes down drastically under the embedded DSP(Digital Signal Processor) environments because it is relatively low in the computational capability to process input speech in real-time. In this paper, we propose a new keyword spotting system using the call-command method, which is consisted of small number of recognition networks. We select the call-command such as 'narae', 'home manager' and compose the small network as a token which is consisted of silence with the noise and call commands to carry the real-time recognition continuously for input speeches.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.41-50
• /
• 1999

The brushless DC motor is widely being used in unmanned factories for its easy maintenance and characteristics of controllability. In this paper, we designed a speed control servo system of a sinusoidal type bmshless DC motor which has high efficiency and usefulness in the industrial fields. This servo system is realized by a controller which is required for driving motors and a new auto-tuning PI control algorithm. The DSP(Digita1 Signal Processor) is adopted as a main controller and a sensor signal processor owing to its fast computational capability and suitable architecture. Also, the hardware PWnl(Pulse Width Modulation) current controller is implemented to pursue a speed command exactly. By experimental results, it is verified that the speed response is pursued fast after command value and the steady-state response is well converged for command value variation without overshoots.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.4
• /
• pp.250-258
• /
• 2015

In this research, we proposed a new approach to implement the real-time motion control of biped robot based on voice command for unmanned FA. Voice is one of convenient methods to communicate between human and robots. To command a lot of robot task by voice, voice of the same number have to be able to be recognition voice is, the higher the time of recognition is. In this paper, a practical voice recognition system which can recognition a lot of task commands is proposed. The proposed system consists of a general purpose microprocessor and a useful voice recognition processor which can recognize a limited number of voice patterns. Given biped robots, each robot task is, classified and organized such that the number of robot tasks under each directory is net more than the maximum recognition number of the voice recognition processor so that robot tasks under each directory can be distinguished by the voice recognition command. By simulation and experiment, it was illustrated the reliability of voice recognition rates for application of the manufacturing process.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.9-12
• /
• 2000

Voice dialing system can recognize the speaker's command and dial the destinate phone number automatically. Such a system is useful for wireless handsets and portable communication devices. As a personal voice dialing system, all the commands are used to train the HMM for speech recognition based on owner-selected phrases. Its implementation requires much less memory space and computation resource compared to a speaker-independent system. Since only two or three training utterances per command are used in this system, it is difficult to estimate exact state duration distribution to improve the recognition performance. Therefore a post-processor is presented to improve the performance. Experiments which use the database collected through the telephone line showed that the proposed post-processor improves the recognition system performance.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1049-1052
• /
• 1999

We present a use. interface(UI) simulator for developing a mobile phone. This simulator consists of 3 major modules: Graphic Tool Editor, User Interface Software(UI), and Network Command Processor(NCP). The Graphic Tool Editor can design a virtual mobile terminal. The NCP sends a command to the phone and then receives its status from the phone after completion of the command. We can add or modify lots of features easily to the phone using the UI module. These modules can interact each other by sharing the common area in the memory. By doing so, these modules can exchange their status and data to operate in real-time. We have designed and tested a virtual prototyping phone for the LGP 3200 manufactured by LGIC by using the simulator. Through a series of experiment, we have believed that our virtual prototyping interactive simulator can do shorten its development and testing cycle by applying it in the early design phase.