• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.587-599
• /
• 2000

This study was conducted to observe the severity of the disease and pathogenecity of Babesia gibsoni parasite on the splenectomized dogs(SPD) and nonsplenectomized(intact) dogs (NSPD) experimentally infected with B gibsoni. The average prepatent period was 4 days in the SPD and 8 days in the NSPD, respectively. Peak parasitaemia(PE) ranged from 26% to 34% of erythrocytes infected in the SPD and from 4% to 5% in the NSPD. Latent parasitaemia was still detectable 40 days as low as under 1.0% of erythrocytes infected after the initial parasitaemia in the SPD. Blood packed cell volume(PCV) decreased to as little as 6.4% to 6.9% in the SPD. The clinical signs were mild fever and anemia in the NSPD, remissions and exacervations of temperature, intermittent or spike-like increases of temperature, progressive polychromatophilic macrocytic anemia with anisocytosis, icterus, marked loss of appetite, rarely haemoglobinuria, and deep brown-yellowish urine in the SPD. Gross pathologic changes mainly involved slightly enlargement of liver and spleen in the NSPD and marked enlargement of liver in the SPD. Anatomic changes associated with the disease included diffuse periportal and centrilobular hephatitis, and membranoproliferative glomerulonephritis. Hyaline droplets, resulting protein metabolic alterations, were found in the convoluted ephithelium of the kidney. The density of lymphocytes within the liver sinusoids was markedly increased. Aggregates of large monocytes and macrophages were demonstrated in the centrilobular veins of the liver. The density of these cells in the centrilobular veins were greatest in the SPD. The forms of B gibsoni parasite found in the acute stage of SPD were large signet ring form, small signet ring form, pyriform, elongated form, comma form, head-phone form, oval form, peared form, racket-like form, amoeboid form, triangle form, quartered form, dot form, band form and multiple, and rosette form, et al. The severity of the disease and pathogenecity of B gibsoni parasite were mild in the NSPD but fatal in the SPD.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.35-39
• /
• 2007

Recently Usage statistics are widely available from online content providers. However. the statistics are not yet available in a consistent data container and the administrative cost of individual provider-by-provider downloads is high. The Standardized Usage Statistics Harvesting Initiative (SUSHI) is developing an automated request and response protocol for moving Project COUNTER (Counting Online Usage of Networked Electronic Resources) Code of Practice usage statistics from providers to library electronic repositories. SUSHI will help libraries make better decisions by reducing the administrative overhead of using Project COUNTER statistics. Publishers in the recording and exchange of usage statistics for electronic resources, initially journals and databases. By following COUNTER's Code of Practice, vendors can provide library customers with Excel or CSV (comma delimited) files of usage data using COUNTER's standardized formats and data elements. The result is a consistent, credible, and compatible set of usage data from multiple content providers. On this study, We propose the acquisition model of usage data based on SUSHI for KESLI that is overseas electronic journal consortium in korea.

• Bulletin of the Korean Mathematical Society
• /
• v.29 no.1
• /
• pp.125-135
• /
• 1992

In various viscus flow problems it has been the custom to replace the convective derivative by the ordinary partial derivative in problems for which the data are small. In this paper we consider the Benard Convection problem with small data and compare the solution of this problem (assumed to exist) with that of the linearized system resulting from dropping the nonlinear terms in the expression for the convective derivative. The objective of the present work is to derive an estimate for the error introduced in neglecting the convective inertia terms. In fact, we derive an explicit bound for the L$_{2}$ error. Indeed, if the initial data are O(.epsilon.) where .epsilon. << 1, and the Rayleigh number is sufficiently small, we show that this error is bounded by the product of a term of O(.epsilon.$^{2}$) times a decaying exponential in time. The results of the present paper then give a justification for linearizing the Benard Convection problem. We remark that although our results are derived for classical solutions, extensions to appropriately defined weak solutions are obvious. Throughout this paper we will make use of a comma to denote partial differentiation and adopt the summation convention of summing over repeated indices (in a term of an expression) from one to three. As reference to work of continuous dependence on modelling and initial data, we mention the papers of Payne and Sather [8], Ames [2] Adelson [1], Bennett [3], Payne et al. [9], and Song [11,12,13,14]. Also, a similar analysis of a micropolar fluid problem backward in time (an ill-posed problem) was given by Payne and Straughan [10] and Payne [7].

• Journal of Veterinary Clinics
• /
• v.6 no.1
• /
• pp.185-191
• /
• 1989

A dog which was hospitalized to Veterinary Teaching Hospital, College of Veterinary Medicine, Jeonbug National University on December 28, 1988 was revealed severe anemia: hemoglobinuria and weakness. In the inspections, abdominal pain and spleno megaly at the ventral abdomen were detected by palpations. In the examinations of blood, the obtained results were summarized as follows: Babesla spp. was identified on the blood smear stained with Giemsa. The Babesia spp. was assumed to the Babesia gibsoni for the their small size and pleomorphism such as comma form, ring form and dot form. In the blood examinations of the patient, Ht: 22.5％, RBC:354${\times}$10$^4$/${\mu}\ell$, Hb: 8.8g/dl, serum protein: 8g/dl, and WBC count was 21, 425/${\mu}\ell$. In the chemical examinations of serum, the value of AST(GOT) was 30iu and ALT(GPT) was 20iu, respectively. The blood sugar was 60mg/d1. In the urine test, urine protein was 30mg/d1 and the hemoglobin In the urine was the ＋＋＋ and occult blood reaction(Benzidine test) in the feces was ＋＋＋. Splenomegaly was confirmed by X-ray examination. To confirm for the Babesia spp. infection, 5ml of the whole blood of the patient(3％ of Parasitized erythrocytes) were inoculated into the cephalic vein of the two normal dogs. In the blood of experimental dogs which were inoculated parasitized blood, Babesia spp. was detected in the two doss and pleomorphic parasites were observed, too. In the blood examinations of No. 1 the Ht and RBC were decreased to 6.8％ and 52${\times}$10$^4$/${\mu}\ell$, respectively. WBC count was 10.600/${\mu}\ell$ and serum protein was 6.8g/dl. The rates of parasitized erythrocytes were 15％ in the experimental dog. Also ＋＋＋ of the hemoglobin was detected in the urine. In the X-ray examination, splenomegaly was comfirmed and it was confirmed by autopsy of the experimental dog(No. 1).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.7
• /
• pp.63-70
• /
• 2004

This paper describes the link layer and physical layer of the Serial ATA which is the next generation for parallel ATA specification that defines data transfer between PC and peripheral storage devices. The link layer consists of CRC generation/error detection, 8b/10b decoding/encoding, primitive generation/detection block. For the physical layer, it includes CDR(Cock Data Recovery), transmission PLL, serializer/de-serializer. It also includes generation and receipt of OOB(Out-Of-Band) signal, impedance calibration, squelch circuit and comma detection/generation. Additionally, this chip includes TCB(Test Control Block) and BIST(Built-In Selt Test) block to ease debugging and verification. It is fabricated with 0.18${\mu}{\textrm}{m}$ standard CMOS cell library. All the function of the link layer operate properly. For the physical layer, all the blocks operate properly but the data transfer is limited to the 1.28Gbps. This is doe to the affection or parasitic elements and is verified with SPICE simulation.

• The Korean Journal of Physiology
• /
• v.13 no.1_2
• /
• pp.29-34
• /
• 1979

The present study was undertaken to investigate depressor action of tannic acid and the mechanism underlies it in the rabbit. The changes in arterial blood pressure were studied after intravenous administration of tannic acid in normal rabbits and the animals pretreated with atropine, propranolol, dibenamine, and hexamethonium. The results obtained were as follows; 1) Following administration of 1.5 mg/kg, 3.0 mg/kg, and 5.0 mg/kg of tannic acid into rabbits the maximum depressor responses observed were $12.0{\pm}0.9\;mmHg$, $23.4{\pm}1.0\;mmHg$, and $34.0{\pm}1.8\;mmHg$ respectively and generally depressor responses increased in proportion to dosage of tannic acid. 2) Since there were no changes in depressor responses to tannic acid in animals pretreated. separately with atropine, propranolol, dibenamine, and hexamethonium, the depressor responses appeared to be resulting from direct vasodilator action of tannic acid on the vascular smooth muscle. Comparing tannic acid and acorn extract in their mechanisms of depressor responses, it is strongly indicated that in acorn there might exist another depressor substance. 3) After administration of large doses of tannic acid, in addition to respiratory changes, the mean arterial blood pressure decreased markedly and was never recovered throughout the experiment. comma Therefore it is also suggested that the lethal action of tannic acid resides in a drastic decline of arterial blood pressure and in respiratory changes as well.

• Safety and Health at Work
• /
• v.13 no.1
• /
• pp.40-50
• /
• 2022

Background: Underground mines have several hazards that could lead to serious consequences if they come into effect. Acquiring, evaluating, and using the real-time data from the atmospheric monitoring system and miner's positional information is crucial in deciding the best course of action. Methods: A graphical user interface-based software is developed that uses an AutoCAD-based mine map, real-time atmospheric monitoring system, and miners' positional information to guide on the shortest route to mine exit and other locations within the mine, including the refuge chamber. Several algorithms are implemented to enhance the visualization of the program and guide the miners through the shortest routes. The information relayed by the sensors and communicated by other personnel are collected, evaluated, and used by the program in proposing the best course of action. Results: The program was evaluated using two case studies involving rescue relating to elevated carbon monoxide levels and increased temperature simulating fire scenarios. The program proposed the shortest path from the miner's current location to the exit of the mine, nearest refuge chamber, and the phone location. The real-time sensor information relayed by all the sensors was collected in a comma-separated value file. Conclusion: This program presents an important tool that aggregates information relayed by sensors to propose the best rescue strategy. The visualization capability of the program allows the operator to observe all the information on a screen and monitor the rescue in real time. This program permits the incorporation of additional sensors and algorithms to further customize the tool.

• Journal of Oral Medicine and Pain
• /
• v.48 no.1
• /
• pp.16-24
• /
• 2023

Purpose: To determine the effects of botulinum toxin (BoNT) injection into the human masseter muscle on the morphology of the mandibular condyle bone using cone-beam computed tomography (CBCT). Methods: Twenty volunteers were randomly assigned to one of two groups. Group I received a single BoNT injection; Group II received two injections, with the second being administered 4 months after the first. CBCT scans of both temporomandibular joints (TMJs) were performed before and 6 months after the first injection. Bony changes in the cortical layers of the condyle heads were evaluated and the long and short axes of both mandibular condyles were measured. The thickness at the thinnest part of glenoid fossa was also quantitatively measured. Results: There was no significant difference between pre- and post-injection CBCT images. Furthermore, no changes in the cortical layers of the condyle heads were observed among the subjects who exhibited mild degenerative TMJ changes. The quantitative measurements (long axis, short axis, and the thickness of thinnest part of glenoid fossa roof) did not differ significantly between pre- and post-injection except for the long axis in Group I. Conclusions: Within the limitations of this study, it appears that BoNT injections into human masseter muscles do not alter the morphology of the mandibular condyle bone in healthy adults.

• Anatomy and Cell Biology
• /
• v.56 no.2
• /
• pp.179-184
• /
• 2023

The Functional endoscopic sinus surgery through transnasal approach is a common modality of treatment for disorders of the nasal cavity, paranasal air sinuses as well as cranial cavity. The olfactory fossa (OF) is located along the superior aspect of cribriform plate which varies in shape and depth. This variable measurement of the depth of OF is mostly responsible for greater risk of intracranial infiltration during endoscopic procedures in and around the nasal cavity. The morphology of frontal and ethmoid sinus (ES) vary from simple to complex. This cadaveric study is planned to improve the ability of the otolaryngologist, radiologist to understand the possible morphological variations and plan steps of less invasive "precision surgery" to have a safe and complication free procedures. A total of 37 human head regions were included in the study. For classification of OF, Modified Kero's classification was used. The size, shape and cells of frontal and ES were noted. We found, type II (60.8%) OF was more common followed by type I (29.7%) than type III (9.5%). The shape of frontal sinus was comma shaped (55.4%) followed by oval (18.9%) than irregular (16.2%). Most common two cells type of ES was seen in 50.0% of both anterior and posterior ES. Out of 74 ES, 8.1% of Onodi cells and 14.9% of agger nasi cells were seen.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.