• 항공우주기술
• /
• 제6권1호
• /
• pp.190-200
• /
• 2007

파이로젠 형 점화기를 KSLV-I 킥모터 시스템 요구 조건을 만족하도록 설계하였다. 비행모델 제작에 앞서 신뢰성을 확보하기 위해 구조시험, 환경시험, 연소시험을 수행하였다. 점화기 구성품들의 구조적 강도를 확인하기 위해 수압 시험을 수행하였다. 극심한 환경 조건에서 점화기가 정상적으로 작동하는 지를 확인하기 위해 충격 및 진동 시험을 고려하였다. 그리고 초기 조건의 변화에 따른 점화 특성을 이해하기 위해서 연소시험을 수행하였다. 최종적으로 지상 시험을 통해 킥모터 추진제를 점화시키기에 충분한 에너지를 공급할 수 있다는 것을 검증하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.213-216
• /
• 2004

The results of combustion performance test of fuel-rich gas generator(GG) using LOx and kerosene as propellant at design and off-design point are described. The parameters used in this analysis are the average exit temperature($T_{GG}$) and the characteristic velocity($C^{\ast}$). The average gas temperature at the exit of gas generator is found to be a function of propellant O/F ratio. For the gas generator having residence time of 4msec or more, the effect of flame residence time and combustion chamber pressure on the exit temperature is not significant. The exit characteristic velocity is found to be linearly proportional to the gas temperature at the exit of gas generator.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.141-145
• /
• 2004

The objective of the present study is to conduct model combustion tests for various injectors to identify their combustion stability characteristics. Three different double swirl coaxial injectors with variation of a recess length have been tested for the comparative study of CH flame structure and dynamic characteristics. Gaseous oxygen and mixture of gaseous methane and propane have been employed for simulating actual propellants used for a full-scale thrust chamber. Upon test results, the direct comparison between various types of injectors can be realized for the selection of the best design among prospective injectors.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2002년도 추계 학술발표회 논문집
• /
• pp.17-23
• /
• 2002

The objective of this study is to develop a new oil combustion technology concerning industrial furnaces and kilns, not only to save energy but also to reduce environmental emissions. Of many kinds of such technologies we chose the high temperature air combustion technology which was initiated by the British steel company in '80s and developed further by the American burner company "North American". In this study it was carried out to test regenerative burner experimentally and to have an applicability to industry. From the variation of configuration of gas nozzle and hot test on the temperature distribution and NOx, it was found out that the reduction of NOx was due to the effect of internal gas recirculation, which will be caused by air emitting velocity from burner nozzle.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.60-66
• /
• 2004

Increased energy costs have placed demands for improved combustion efficiency, high equipment availability, low maintenance and safe operation. Simultaneously low NOx modification, installed due to stricter environmental legislations, require very careful combustion management. The flame diagnostics system has been developed specially to meet these requirements. We aimed at gaining the relationship between burner flame image and emissions such as NOx and unburned carbon in furnace by utilizing the image processing method. For the first step of development, its possibility test was undertaken with bench furnace. The test proceeded to the second step with pilot furnace, the system was observed to be effective for evaluating the combustion conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.636-640
• /
• 2002

Acoustic coupled combustion instability, which is one of the most undesirable phenomena in the development of liquid propellant rocket engine, can cause serious damage to a rocket itself, and must be avoided by all means. Unfortunately, KSR-III rocket went through combustion instability during engine start at the propulsion test article No.2. To resolve the problem, time sequence (cyclogram) has been changed, and baffle system has been applied. In consequence of change, stable combustion was achieved.

• 한국연소학회지
• /
• 제21권1호
• /
• pp.31-37
• /
• 2016

Swirler generates the overall swirling flow in the combustion chamber and this swirling flow governs the flame stability and enhances fuel atomization. This paper deals with the flare angle effects on flow streamlines, recirculation zone, Central Toroidal Recirculation Zone(CTRZ) and Corner Recirculation Zone(CRZ) in the model combustion chamber using counter-rotating swirler. 2D PIV system was employed to obtain the velocity components and test condition was obtained using Reynolds Analogy equivalent to air test. We observed transitional flow patterns of flare angle increased. The obtained results show that the flare angle controls the behavior of Recirculation zone, Central Toroidal Recirculation Zone and Corner Recirculation Zone.

• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.92-98
• /
• 2008

The flame image observation and analysis has been investigated for combustion monitoring and management of the pulverized coal firing for thermal power plant, especially for lower nitrogen oxide generation and safer operation. We aimed at obtaining the relationship between burner flame image information and emissions of nitrogen oxide and unburned carbon in furnace utilizing the flame image processing methods, by which we quantitatively determine the conditions of combustion on the individual homers. Its feasibility test was undertaken with Samchonpo thermal power plant #4 unit which has 24 burners, through which the system was observed to be effective for evaluating the combustion conditions and continuous monitoring to prevent future loss of ignition.

• 한국폐기물자원순환학회지
• /
• 제35권7호
• /
• pp.600-605
• /
• 2018

In this study, the combustion characteristics were investigated based on the biodrying solid recovered fuel (SRF) in a 5 Ton/day scale combustion boiler. The composition of the combustion gas containing the biodrying SRF was analyzed, the particulate matter, and its HCl content was determined with the air pollutant process test method. Mass balance, carbon balance, and combustion efficiency were calculated according to the equivalence ratio (ER) method; the energy recovery efficiency of the combustion boiler was also analyzed. The overall combustion efficiency of the biodrying SRF was 97.3 % and the energy recovery efficiency was 80.2%.

• 한국과학교육학회지
• /
• 제31권6호
• /
• pp.942-957
• /
• 2011

이 연구는 연소에 대해 초등교사가 가지고 있는 개념 수준을 파악하는데 그 목적이 있다. 성별, 경력, 6학년 과학교과의 지도 경험, 과학 관련 학력이 고루 분포되도록 하여 12명의 초등교사를 연구 대상으로 선정 하였다. 연구 대상자들에게 5개의 주관식 문항으로 구성된 개념 검사지를 투입하여 개념 정도를 알아본 후, 좀 더 구체적으로 개념 수준 정도를 알아보기 위해 반구조화된 면담을 실시하여 데이터를 수집하였다. 개념 검사지의 내용은 '연소의 정의', '집기병으로 덮었을 때 촛불이 꺼지는 이유', '집기병 속 연소 전과 후의 산소와 이산화탄소', '철솜의 연소', '연소 후 생성물'에 관한 것으로 구성되었다. 그리고 교사별 각 문항에 대한 응답을 과학적 개념(S), 부분개념(P), 오개념(M)의 수준으로 분류하여 정리하였다. 그 결과 모든 문항에서 오개념 또는 부분개념을 가진 교사가 50% 이상이었다. 또한 6학년 과학 교과 지도 경험이 있는 교사들이 경험이 없는 교사들에 비해 연소에 대한 과학적 개념 형성 비율이 높다는 것도 알 수 있었다. 눈에 보이지 않는 기체를 다루는 연소 개념을 눈으로 볼 수 있는 시각화 자료가 개발되어야 하며, 이를 이용해 교사 연수 또는 예비교사 교육이 이루어진다면 교사들의 과학적 개념 형성에 도움이 될 것이다.