• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.19-24
• /
• 2010

Five different size of orifice were applied in a constant volume combustion chamber for evaluating the effects of torch-ignition on combustion. The initial flame development and flame propagation were analyzed by the mass burned fraction and combustion enhancement rate. The combustion pressures were measured to calculate the mass burned fractions and the combustion enhancement rates. In addition, the flame propagations were visualized by the shadowgraph method for the qualitative comparison. The result showed that the combustion pressure and mass burned fraction were increased when using the torch-ignition device. The combustion enhancement rates of torch-ignition cases were improved in comparison with conventional spark ignition. Finally, the visualization results showed that the torch-ignition induced faster burn than conventional spark ignition due to the earlier transition to turbulent flame and larger flame surface, during the initial stage.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.593-602
• /
• 1999

This paper presents combustion characteristics of LPG-air mixture ignited by the plasma jet in a cylindrical vessel with constant volume, in which our focus is placed on the multi-hole plug configuration. Four types of the plug configuration depending on the number of orifice and the arranged angle are considered, along with two cases of conventional spark ignition for comparison. Not only the flame propagation is photographed at intervals, but the pressure in the combustion chamber is also recorded through the entire combustion process. The results show that the plasma jet ignition enhances the overall combustion rate remarkably in comparison to the spark ignition by generating irregular flame front and penetrating through the unburned mixture. The combustion enhancement rate agrees favorably with the available data, which supports the validity of our experiment. Synthetically estimating, the two-hole sixty-degree plug appears to be the most desirable, in that the maximum pressure as well as the combustion duration is less affected by the sub-energy level than the others. It is also deduced that there may exist an optimal plug configuration capable of rapid combustion for a specific combustion chamber.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.96-103
• /
• 2003

In this paper, the heat loss to the constant volume vessel wall was investigated using instantaneous heat flux sensor, schlieren visualization, pressure rise curve. And the heat loss characteristics of plasma jet ignition were compared with conventional spark ignition. In case of plasma jet ignition, the flame kernel moves toward the center of combustion vessel in the initial period of combustion, and the flame surface spread out to the vessel wall. However, in case of conventional spark ignition, the flame surface contact with combustion vessel wall in the initial period of combustion. As a result, heat loss in the combustion duration for conventional spark ignition increase faster than that of plasma jet ignition. And the combustion enhancement rate of plasma jet ignition is higher than that of conventional spark ignition, and it was found that the heat loss rate is inversely proportional to the combustion enhancement rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.508-512
• /
• 2017

본 연구에서는, 고연소속도 고체 추진제 개발을 위하여 금속연료인 Al 과 Zr이 도입된 HTPB/AP계 추진제의 연소특성에 대한 연구를 수행하였다. 고체 추진제의 연소특성은 연소속도와 압력지수로서 평가하였으며 연소속도 증진을 위한 연소촉매제로서 Butacene을 적용하여 추진제를 제조하였다. Al과 Zr이 도입된 추진제가 성능 및 연소 특성이 향상되었음을 보였다.

• 한국가시화정보학회지
• /
• 제9권1호
• /
• pp.42-48
• /
• 2011

Six different size of torch-ignition device were applied in a constant volume combustion chamber for evaluating the effects of torch-ignition on combustion. The torch-ignition device was designed for six different volumes and same orifice size. The combustion pressures were measured to calculate the mass burn fraction and combustion enhancement rate. In addition, the flame propagations were visualized by shadowgraph method for the qualitative comparison. The result showed that the combustion pressure and mass burn fraction were increased when using the torch ignition device. And the combustion duration were decreased. The combustion enhancement rates of torch-ignition cases were improved in comparison with conventional spark ignition. Finally, the visualization results showed that the torch-ignition induced faster burn than conventional spark ignition due to the earlier transition to turbulent flame and larger flame surface, during the initial stage. Finally, the initial flame propagation was affected by torch-ignition volume.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.75-83
• /
• 2001

This paper presents the evaluation of combustion characteristics of sing-hole plasma jet ignitions in comparison with conventional spark ignition for variable of swirl velocity. Plasma jet plugs are three types according to ejecting directions : center of chamber, positive and negative swirl flow direction. Experiments are carried out for equivalent ratio 1.0 of LPG-air mixture in a constant volume cylindrical vessel. Not only the flame propagation is photographed at intervals, but the pressure variation in the combustion chamber is also recorded throughout the entire combustion process. The results show that the plasma jet ignitions and spark ignition enhance the overall combustion rate by increasing the swirl velocity. The dependence of the combustion rate swirl velocity leade to the conclusion that the placma jet plug, which ejects plasma jet to the cwnter of combustion chamber is the most desirable ignitor than other plugs.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2010년도 춘계학술 발표회
• /
• pp.59-63
• /
• 2010

토치 점화 장치의 연소 특성을 파악하기 위하여 7개의 각기 다른 토치 점화 장치를 설계하였다. 토치 점화장치의 오리피스 직경에 따른 특성을 파악하기 위하여, 토치 점화 장치의 체적과 높이는 고정하고, 오리피스 직경을 4mm에서 16mm까지 2mm씩 증가시키며 실험하였다. 초기 화염 생성 및 전파는 질량 연소율과 연소 촉진율로 분석하였다. 질량 연소율과 연소 촉진율을 계산하기 위하여 정적 연소실 내의 평균 압력을 측정하였다. 또한 shadow graph법을 이용하여, 초기 화염 생성과 화염 전파과정 전 영역을 가시화하였다. 토치 점화 장치를 사용한 경우에는 일반적인 스파크 점화와 비교하여 질량 연소율의 기울기가 증가하였고, 연소 촉진율도 개선된것을 확인하였다. 또한 가시화된 이미지를 확인한 결과 토치 점화 장치를 사용하면 초기 화염 발달 단계에서 화염이 난류 화염으로 천이되어 연소가 촉진된것을 확인하였다.

• 한국항공운항학회지
• /
• 제23권4호
• /
• pp.1-5
• /
• 2015

In this work, a study was conducted to investigate the effect of diaphragm thickness on the regression rate of the hybrid rocket motor. To observe the flow pattern and the recirculation zone, visualizations of combustion chambers with different diaphragm thickness (5mm, 10mm) were performed. It was found that the case with 5 mm thickness had a larger recirculation zone and therefore, had a higher regression rate than the case with 10mm thickness due to the increased residence time and heat transfer toward the fuel surface. Finally, it was concluded that the thickness of diaphragm can be a critical parameter for the enhancement of the regression rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.189-193
• /
• 2005

로켓엔진에서 선형 연소 안정한계에 미치는 유한화학반응의 열적 효과와 막냉각 효과를 조사하였다. 안정한계를 평가하기위해 3차원 연소실에서 유한화학반응을 채택한 반응 유동장 계산으로부터 구한 유동변수들을 사용하였다. 주요 유동변수들의 값은 유한화학반응 모델의 채택으로 인해 상당히 달라졌으며 결과적으로 안정한계도 수정되었다. 유한화학반응은 열적 관점에서 안정성 향상에 기여함을 알았다. 또한, 막냉각을 한 경우, 안정성 경향이 향상됨을 알 수 있었다.

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.75-81
• /
• 2006

로켓엔진에서 선형 연소 안정한계에 미치는 유한화학반응의 열적 효과와 막냉각 효과를 조사하였다. 안정한계를 평가하기위해 3차원 연소실에서 유한화학반응을 채택한 반응 유동장 계산으로부터 구한 유동변수들을 사용하였다. 주요 유동변수들의 값은 유한화학반응 모델의 채택으로 인해 상당히 달라졌으며 결과적으로 안정한계도 수정되었다. 유한화학반응은 열적 관점에서 안정성 향상에 기여함을 알았다. 또한 막냉각을 한 경우, 안정성 경향이 향상됨을 알 수 있었다.