• Asian Journal of Atmospheric Environment
• /
• v.11 no.2
• /
• pp.131-137
• /
• 2017

A cyclone is an effective tool to facilitate the collection of aerosol particles without using filters, and in cell exposure studies is able to collect a sufficient amount of aerosol particles to evaluate their adverse health effect. In this study, we examined two different methods to improve the aerosol particle collection efficiency of a cyclone. The individual and combined effects of reducing the surface roughness of the inner wall of the cyclone and of using a circular cone attachment were tested. The collection efficiency of particles of diameter $0.2{\mu}m$ was improved by approximately 10% when using a cyclone with a smoothened inner wall (average roughness $Ra=0.08{\mu}m$) compared with the original cyclone ($Ra=5.1{\mu}m$). A circular cone attachment placed between the bottom section of the cyclone and the top section of a collection bottle, resulted in improved collection of smaller particles without the attachment. The 50% cutoff diameter of the modified cyclone (combined use of smoothened inner wall and attachment) was $0.23{\mu}m$ compared to $0.28{\mu}m$ in the original model. The combined use of these two techniques resulted in improved collection efficiency of aerosol particles.

• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.1-13
• /
• 1989

Effects of ionizing radiation alone and combined with chemotherapy on tumor growth and it's clonal specificity monitored by changes in distribution of chromosome number were studies in A549 ceil line originated from human adenocarcinoma of the lung. Radiation (300 rad, 600 rad and 900 rad) were delivered with or without 5-FU. Forty eight hours later, 57.5% of growth inhibition of cell w8s seen in cells treated with 5-FU concentration of $0.4{\mu}g/ml$ for 24hr exposure. Cell survival curves after radiation with and without 5-FU were made. Chromosomal analysis of cells in metaphase in control, and in cells treated with 300 rad of radiation, or $0.4{\mu}g/ml$ of 5-FU treatment, and combined treatment of both were done to examine the changes in ploidy and number of chromosome. Radiation combined with S-FU enhanced growth inhibition of A549 cells. However, no evidence of synergegic effects in growth. inhibition was observed in the cells treated with the combination therapy. Pattern of chromosomal distribution of survived cells were shifted from hyperploidy to hypoploidy by single dose of radiation (300 rad). As radiation dose increased a large number of hypoploidy cells were observed. Following treatment of cells with 5-FU, chomosomal distribution of survived cells were also shifted to hypodiploidy which were seen in cells treated with radiation, The ceil treated with 5-FU and fellowed by radiation within 24 hrs had cell with increased number of hypodiploidy cells. Almost same type of chromosomal changes were reproduced in cells treated with combined treatment with radiation and 5-FU. Minor differences were that cells with fewer number of chromosome were more frequent in cells treated with combined therapy. Further increase in cells of hypoploidy (93%) having 1-10 chromosome were induced by additional radiation. Therefore, the enhanced therapeutic effect of 5-FU combined with radiation of A549 cells appeared to be additive rather than synergistic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.911-916
• /
• 2005

Noise map is a presentation of existing data or predicted noise situation in terms of noise indicator. However, it has shortcoming for assessing the number of people exposed, or the number of dwellings affected to any relevant limit values of noise level in certain areas. In this study, so called over-ride value noise mapping is proposed to make up for the shortcoming by using over-ride function of object-oriented programming and it is to show the guard of the area where it is satisfied the standard of option, or it is not satisfactory. Over-ride value noisemap data is combined with topography layer, population and house statistics, and GIS space statistical analysis. The over-ride value noise mapping can also he applied to make the road traffic noisemap, the railroad noisemap, the aircraft noisemap, and the industrial site noisemap This can express noise damage information more exactly.

• Clinical and Experimental Pediatrics
• /
• v.52 no.6
• /
• pp.649-654
• /
• 2009

The immune system is comprised of cells and molecules whose collective and coordinated response to the introduction of foreign substance is referred to as the immune response. Defense against microbes is mediated by the early reaction (innate immunity) and the late response (adaptive immunity). Innate immunity consists of the epithelial barrier, phagocytes, complement and natural killer cells. Adaptive immunity, a more complex defense reaction, consists of activation of later-developed lymphocytes that, when stimulated by exposure to infectious agents, increase in magnitude and defensive capabilities with each successive exposure. In this review we discuss recent advances in important primary immune deficiency disorders of innate immunity (chronic granulomatous disease, leukocyte adhesion deficiency) and adaptive immunity (severe combined immune deficiency, Wiskott- Aldrich syndrome).

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.352-357
• /
• 2004

In this study. the effects of combined environmental factors on mechanical and thermal analysis properties of graphite/epoxy composites were evaluated through a 2.5KW accelerated environmental aging tester. Environmental factors such as temperature. moisture, and ultraviolet were considered. A xenon-arc lamp was utilized for ultraviolet light. and exposure times of up to 3000 hours were applied. Several types of specimens - tensile, bending, and shear specimens those are warp direction and fill direction were used to investigate the effects of environmental factors on mechanical properties of the composites. The glass fabric $\sharp$650/AP300 was used for the fabrication of specimens. Mechanical degradations for tensile, bending and shear properties were evaluated through a UTM. Also. storage shear modulus. loss shear modulus, and tan $\delta$ were measured as a function of exposure times through a dynamic mechanical analyzer. Finally exposed surfaces of the composites were examined using II scanning electron microscope.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.241-244
• /
• 2006

The basic prediction model was constructed to obtain optimal maintenance method for concrete structure under marine environment by exploring the mechanism of mono and combined deterioration in lab. This model was planned to be upgraded with data acquired from several exposure specimens under same environment as structures. The computer program developed to give useful guidance observer would be improved. Several repair materials and repair construction methods applied to exposure specimens will be tested for its performance of prohibit salt attack and freezing & thawing action during experimental period about ten years. All of these data could be available to complete the prediction system. The manager will be able to use the system for optimal maintenance of marine concrete structures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.531-534
• /
• 2005

The basic prediction model was constructed to obtain optimal maintenance method for concrete structure under marine environment by exploring the mechanism of mono and combined deterioration in lab. This model was planned to be upgraded with data acquired from several exposure specimens under same environment as structures. The computer program developed to give useful guidance observer would be improved. Several repair materials and repair construction methods applied to exposure specimens will be tested for its performance of prohibit salt attack and freezing & thawing action during experimental period about ten years. All of these data could be available to complete the prediction system. The manager will be able to use the system for optimal maintenance of marine concrete structures.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.403-415
• /
• 2021

Background: This study aimed to assess the possibility of benzene exposure in workers of a Korean semiconductor manufacturing company by reviewing the issued patents. Methods: A systematic patent search was conducted with the Google "Advanced Patent Search" engine using the keywords "semiconductor" and "benzene" combined with all of the words accessed on January 24, 2016. Results: As a result of the search, we reviewed 75 patent documents filed by a Korean semiconductor manufacturing company from 1994 to 2010. From 22 patents, we found that benzene could have been used as one of the carbon sources in chemical vapor deposition for capacitor; as diamond-like carbon for solar cell, graphene formation, or etching for transition metal thin film; and as a solvent for dielectric film, silicon oxide layer, nanomaterials, photoresist, rise for immersion lithography, electrophotography, and quantum dot ink. Conclusion: Considering the date of patent filing, it is possible that workers in the chemical vapor deposition, immersion lithography, and graphene formation processes could be exposed to benzene from 1996 to 2010.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.416-424
• /
• 2018

Objective: The objective of this study was to estimate the numbers of employees occupationally exposed to noise according to their industry and size. Methods: A Delphi panel consisting of 15 occupational health experts estimated the exposure prevalence of noise in workplace. Data on Industrial Accident Compensation Insurance provided from Occupational Safety and Health Research Institute were combined to produce the exposure population. Results: In Korea, 16.0% of employees, 2,539,890 out of 15,838,926, was estimated to exposed to noise occupationally. The rate was 32.7% and 10.3% in manufacturing sector and non-manufacturing sector, respectively. The highest rate, 52.5%, was found in manufacturing industries of wood and of products of wood and cork(except furniture) and of other transport equipment. Sorted by their size of business, the rate was higher as the number of employee was larger in manufacturing sector. Conclusions: Compared to the same rate estimated in the US, 17.2%, the result of this study seems to be in a resonable range.

• Journal of Nutrition and Health
• /
• v.39 no.6
• /
• pp.539-548
• /
• 2006

In recent years a concern of excessive intakes of vitamins and minerals from various sources is increasing, since there has been a marked increase in production and consumption of vitamin and mineral supplements and fortified foods. The purpose of this study was to assess the maximum exposure of vitamins and minerals from various sources including diet, fortified foods, and health functional foods among Koreans. As a result, the highest exposure group of most vitamins and minerals from diet was adults (30 - 49 years of age) according to 2001 Korean National Nutrition and Health Survey Report. Maximum dietary intakes of vitamin A, $B_1,\;B_2$, C, nicotinamide, calcium, phosphorus and iron were 0.5 - 7 times of the RDA for Koreans, 7th ed. Maximum intakes of vitamins and minerals from fortified foods by adults (20 - 59 years of age) were 8 - 760% of the Korean RDA. In addition, maximum exposure of vitamins and minerals from vitamin mineral health functional foods by middle aged people was 35 - 140% of the upper limits (UL: DRI for Koreans). As a consequence, maximum combined intakes of vitamin $B_6$, vitamin C, calcium, iron and zinc from the above sources including diet, fortified foods and vitamin mineral health functional foods were greater than the UL. These results would be applied for determining the safe upper limits of vitamin and mineral of health functional foods.