• Coupled systems mechanics
• /
• v.11 no.3
• /
• pp.233-257
• /
• 2022

This work presents a comparative study between two different models: trapezoidal and T-shaped combined footings. The comparative study between trapezoidal and T-shaped combined footings presented in this paper generatesresultsthat have an unparalleled accuracy for all foundation engineering problems. The main part of this research is to obtain the optimal area, reinforcing steel, and thickness of the trapezoidal and T-shaped combined footings using the new models. The comparison is made for two trapezoidal combined footings and two T-shaped combined footings ofreinforced concrete subjected to the same load.Themain findings are: themodelfortrapezoidal combined footings can be used for rectangular and triangular, and the T-shaped combined footings can be used for rectangular. The structure of the paper is asfollowsfirst a very complete state of the art with extensive referencesthat describesthe methodology used for the different models clearly, presents different numerical examples, results and at the end conclusions.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• Steel and Composite Structures
• /
• v.30 no.2
• /
• pp.97-108
• /
• 2019

This paper presents a new model for the strap combined footings to obtain the most economical contact surface on the soil (optimal dimensioning) to support an axial load and moment in two directions to each column. The new model considers the soil real pressure, i.e., the pressure varies linearly. Research presented in this paper shows that can be applied to the T-shaped combined footings and the rectangular combined footings. The classical model uses the technique of test and error, i.e., a dimension is proposed, and subsequently, the equation of the biaxial bending is used to obtain the stresses acting on each vertex of the strap combined footing, which must meet the conditions following: The minimum stress should be equal or greater than zero, and maximum stress must be equal or less than the allowable capacity that can withstand the soil. Numerical examples are presented to obtain the optimal area of the contact surface on the soil for the strap combined footings subjected to an axial load and moments in two directions applied to each column. Appendix shows the Tables 4 and 5 for the strap combined footings, the Table 6 for the T-shaped combined footings, and the Table 7 for the rectangular combined footings.

• Korean Journal of Exercise Nutrition
• /
• v.13 no.3
• /
• pp.193-201
• /
• 2009

The purpose of this study was to examine the effects of combined exercise and creatine consumption to muscular function and pain in 24 middle-aged men in back pain patients. The patients were categorized into three groups; 8 patients underwent combined exercise alone, 8 patients underwent creatine consumption as well as combined exercise and the control group was 8 patients without these options. The follow-up period was 10 weeks doing aerobic exercise, resistance exercise or creatine consumption. The group that underwent creatine intake as well as combined exercise simultaneously showed significant increase on the 0°, 12°, 24°, 36°, 48°, 60° and 72° of back muscular power in the muscular function changes compared to control group, furthermore, it showed statistically significant improvement on the 24°, 36°, 48° and 60° in the combined exercise group compared to control group. However, between the group that underwent creatine consumption as well as combined exercise and the group that underwent combined exercise, the back muscular power was high in the all angles, but it was not statistically significant. The group that performed both creatine consumption and combined exercise showed pain relief relatively, comparing with either combined exercise or control group and the pain was also alleviated in the combined exercise group.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.4
• /
• pp.351-354
• /
• 2009

Objective : Combined hyperative dysfunction syndrome (HDS) defined as the combination of HDSs such as trigeminal neuralgia (TN). hemifacial spasm (HFS) and glossopharyngeal neuralgia (GPN), which mayor may not occur simultaneously on one or both sides. We reviewed patients with combined HDS and demonstrated their demographic characteristics by comparing them with those of patients with a single HDS. Methods : Between October 1994 and February 2006, we retrospectively studied a series of 1,720 patients who suffered from HDS and found 51 patients with combined HDSs. We analyzed several independent variables in order to evaluate the prevalence and etiologic factors of combined HDS. Results : The combined HDS group accounted for 51 of 1,720 (2.97%) patients with HDS; 27 cases of bilateral HFS, 10 cases of bilateral TN and 14 cases of HFS with TN. Their mean age was 52.1 years (range, 26-79 years). There were 5 men and 46 women. Seven patients had synchronous and 44 patients metachronous onset of HDSs. By comparison of combined and single HDS groups, we found that age and hypertension were closely associated with the prevalence of combined HDS (p<0.05). Conclusion : This study revealed that combined HDS was very rare. Hypertension and age might be the most important causative factors to evoke combined HDS.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.458-466
• /
• 2007

This study is to evaluate control effects of separation wall by surveying water quality and sewer overflows during dry and wet periods in combined sewer and separated sewer systems. Ravine water from the combined Seokgyo outfall with the separation wall was separated about four times larger than sewage flow during dry periods. The water quality of the combined Seokgyo outfall with separation wall during dry periods is flow weighed average BOD 61 mg/L, the combined Cheonseokgyo outfall without the separation wall is average BOD 71 mg/L, and the separated Pyeongsong center outfall is average BOD 41 mg/L. The BOD concentration in separated outfall form about 57% of the combined outfall, and this means the separated outfall (i.e. storm sewer) is polluted by inflow of sewage. The overflow load of the separated outfall is ten times higher than the combined outfall and its overflow load per rainfall is three times than combined outfall during the wet periods. Therefore, the control plan of overflow load is required in storm sewer. The control effects of the overflow load increased 79% by setting the separation wall in the combined sewer, and showed 27% increase without the separation wall in separated sewer, but forecasted over 80% increase of effects if the separation wall was set.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2004.05a
• /
• pp.63-68
• /
• 2004

The objective of this paper is to analyze the combined productivity at container terminal. We present a mode3 for combined productivity that perform the container transportation between apron and yard. Usually, the efficiency of container terminal is evaluated by productivity of container cranes at apron, but there are other equipment such as transport vehicles and yard cranes. Therefore, a method that can estimate the combined productivity of equipment of container terminal is required. We performed various simulation experiment and analyzed combined productivity to estimate the required number of equipment.

• Korean Journal of Biological Psychiatry
• /
• v.30 no.1
• /
• pp.24-30
• /
• 2023

Objectives Alzheimer's disease (AD) is the most common form of dementia in older adults, damaging the brain and resulting in impaired memory, thinking, and behavior. The identification of differentially expressed genes and related pathways among affected brain regions can provide more information on the mechanisms of AD. The aim of our study was to identify differentially expressed genes associated with AD and combined biomarkers among them to improve AD risk prediction accuracy. Methods Machine learning methods were used to compare the performance of the identified combined biomarkers. In this study, three publicly available gene expression datasets from the hippocampal brain region were used. Results We detected 31 significant common genes from two different microarray datasets using the limma package. Some of them belonged to 11 biological pathways. Combined biomarkers were identified in two microarray datasets and were evaluated in a different dataset. The performance of the predictive models using the combined biomarkers was superior to those of models using a single gene. When two genes were combined, the most predictive gene set in the evaluation dataset was ATR and PRKCB when linear discriminant analysis was applied. Conclusions Combined biomarkers showed good performance in predicting the risk of AD. The constructed predictive nomogram using combined biomarkers could easily be used by clinicians to identify high-risk individuals so that more efficient trials could be designed to reduce the incidence of AD.

• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.43-51
• /
• 2001

When consumer evaluates a product, every aspec of the product affects the evaluation. Human uses at least five sensory organs for the evaluation. Multi-sensory or multi-modal design tries to add auditory and olfactory factors to the traditional visual-centered design. For the multi-modal design, it is essential to understand relationships between combined sensory stimuli and human sensibility. Information between simple sensory stimulus and human sensibility is pre-requisite to combine multi-modal stimuli. This study investigated human sensibility against 8 colors and 30 sounds, presented independently. The combined stimuli of color and sound were made based on the sensibility generated by each stimulus. Human sensibility generated by the combined stimuli of color and sound were made based on the sensibility generated by each stimulus. Human sensibility generated by the combined stimuli was investigated with 20 female subjects. For combined stimuli that generated the same kind of sensibility respectively, generated sensibility was same but strength was diminished. For combined stimuli that generated the different sensibilities respectively, subjects showed neutral sensibility or no special sensibilities. Sensibilities to the same stimuli also showed difference depending on personal background of the subjects.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.158-161
• /
• 2003

Extrusion of forward-gear and backward-rod by combined extrusion with controlling the extrusion velocity using a counter tool is studied. In the combined forward-backward extrusion with controlling extrusion velocity, only parts with short gear can be formed. To obtain longer gear parts, extrusion with reverse ram motion is carried out after the combined forward-backward extrusion process. In this method, combined forward-backward extrusion is carried out until excessive extrusion length is attained and then, the motion of the punch is stopped and the counter tool is moved in the inverse direction and returned to the position for obtaining the desired extrusion length. The experiment is carried out by using lead for billets as a model material. With reverse ram motion, longer gear teeth without under-filling defect can be formed than that by only combined extrusion with controlling extrusion velocity.