• Korean Journal of Head & Neck Oncology
• /
• v.10 no.2
• /
• pp.91-101
• /
• 1994

Nodular thyroid disease is a common clinical problem. The problem in clinical practice is to distinguish malignant or potentially malignant tumor from harmless nodules. The cases of thyroid nodule surgically managed at Department of General Surgery, Soon Chun Hyang Univ. Hospital during the period Jan. 1985 to July. 1992 were reviewed retrospectively. To assess method of distinguishing malignant from benign lesions of the thyroid gland, we reviewed 162 patients with thyroid nodule. There were 61(37.7%) malignant nodules and 101(62.3%) benign nodules. According to the review, distinguishing the benign from the malignant nodule with history, physical examination, clinical manifestation, and duration of illness was not suggested sufficiently. In ultrasonogram of 73 cases, 57.5% of nodules were solid, 20.6% were cystic, 21.9% were mixed solid and cystic. Of these, 28.5% of the operated solid lesions, 12.5% of the mixed lesions, and only 6.7% of the cystic lesions were malignant. Thyroid scanning of 82 cases revealed cold nodules in 60 patients(73.2%), of which 26 cases were malignant(36.6%) 137 patients underwent fine needle aspiration cytology(FNAC), and these results were as follow: sensitiviey was 70.6%, specificity was 93.0%, false-positive rate was 14.3%, and false-negative rate was 15.8%. 41 patients underwent frozen biopsy, and the results as follow: sensitivity was 80.0%, specificity was 89.7%. Neither scintigraphy nor ultrasonogram has sufficient specificity to distinguish benign from malignant nodule. But FNAC and frozen biopsy have sufficient accuracy to differentiate benign from malignant nodule. In the benign nodules, the most common type of operation was total lobectomy (60.4%). Of the malignant nodules, total thyroidectomy with or without modified radical neck dissection was performed in 30 cases(49.2%). We conclude that the single technique used to determine the differential diagnosis of a thyroid nodule are unrealiable. It is therefore essential to combine all avaiable clinical and laboratory information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.440-446
• /
• 2011

In this paper, a X-band 50 W pulsed solid state power amplifier(SSPA) is designed and fabricated for radar systems. The SSPA consists of a driver amplifier, a high power amplifier, and a pulse modulator. The high power stage employes four 25 W GaAs FET to deliver 50 W at X-band. To meet the stringent target specification for the SSPA, we used a new hybrid pulse switching method, which combine the advantage of pulse modulation and bias switching method. The fabricated SSPA shows a power gain of 44.2 dB, an output power of 50 W over a 1.12 GHz bandwidth. Also, pulse droop < 1 dB meet the design goals and a rise/fall time is less than 12.45 ns. Fabricated X-band pulsed SSPA size is compact with overall size of $150{\times}105{\times}30\;mm^3$.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1172-1184
• /
• 2003

At present, new techniques based on different component reference models for the integration of component and system of different platforms, such as EJB and COM+, are introduced. The operation between the components in the identical component platform is realized by the composition at the source level. In case of the different component platform, however, it is impossible to use combined components in real condition although they are components of similar domain. In this paper we proposed a solution for the composition problem by using component transformation methodology based on model between EJB and COM+ components which are different components. For the composition between EJB and COM+ components, we compared and analyzed each reference model, then proposed the Virtual Component Model which is implementation independent and the Implementation Table for the mutual conversion. Reffering to the Virtual Component Model and the Implementation Table, we can generalize each Implementation model to the Virtual Component Model, make the Virtual Component Model which is implementation independent through the virtual component modeling, transform EJB and COM+ components selectively. Proposing the effective Model Transformation method to the different component platform, we can combine EJB and COM+ components.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.747-754
• /
• 2009

Software product line engineering is an approach to creating core assets by systematically exploits common that can be highly reusableand different characteristics in related system families that is domain. By adapting this approachin object and component paradigm, software productivity is extended. Recently, Software development paradigm is changed to service oriented paradigm which is using services that are core assets. Therefore, to develop service oriented software more flexible, systematic and to enhance business agility about business changes, we need adaptation of product line to creation of services that are core assets. In this paper, we propose an approach to create and specify domain service through combine of product line and service oriented paradigm. Domain service explicitly specifies commonality and variability by domain service common/optional property variability, operation type variability, message type variability. By using this approach, it can support efficient and flexible service oriented development by producing various services through customization of domain service for the purpose.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.244.1-244.1
• /
• 2013

The p-type GaN which act as a hole injection layer in GaN-based LEDs has fundamental problems. The first one arises from the difficulty in growing a highly doped p-GaN (with a carrier concentration exceeding ~1018 $cm^{-3}$). And the second one is the absence of appropriate metals or conducting oxides having a work function that is larger than that of p-type GaN (7.5 eV). Moreover, the LED efficiency is decreases gradually as the injection current increases (the so-called 'efficiency droop' phenomenon). The efficiency droop phenomenon in InGaN quantum wells (QWs) has been a large obstacle that has hindered high-efficiency operation at high current density. In this study, we introduce the new approaches to improve the light-output power of LEDs by using graphene oxide sheets. Graphene oxide has many functional groups such as the oxygen epoxide, the hydroxyl, and the carboxyl groups. Due to nature of such functional groups, graphene oxide possess a lot of hole carriers. If graphene oxide combine with LED top surface, graphene oxide may supply hole carriers to p-type GaN layer which has relatively low free carrier concentration less than electron concentration in n-type GaN layer. To prove the enhancement factor of graphene oxide coated LEDs, we have investigated electrical and optical properties by using ultra-violet photo-excited spectroscopy, confocal scanning electroluminescence microscopy.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.571-577
• /
• 2021

This paper describes ISO/TR 4804, an international standard to describe how to design and verify autonomous cars to ensure safety and cybersecurity. Goals of ISO/TR 4804 are (1) positive risk balance and (2) avoidance of unreasonable risk. It also 12 principles of safety and cybersecurity to achieve these goals. In the design procedures, it describes (1) 13 capabilities to achieve these safety and cybersecurity principles, (2) hardware and software elements to achieve these capabilities, and (3) a generic logical architecture to combine these elements. In the verification procedures, it describes (1) 5 challenges to ensure safety and cybersecurity, (2) test goals, platforms, and solutions to achieve these challenges, (3) simulation and field operation methods, and (4) verification methods for hardware and software elements. Especially, it regards deep neural network as a software component and it describe design and verification methods of autonomous cars.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.9-17
• /
• 2019

In this paper, we propose an attribute-based broadcast encryption algorithm that can be applied to satellite broadcasting network. The encryption algorithm is a cryptographic method by which a carrier(sender) can transmit contents efficiently and securely to a plurality of legitimate users through satellites. An attribute-based encryption algorithm encrypts contents according to property of contents or a user, In this paper, we combine effectively two algorithms to improve the safety and operability of satellite broadcasting network. That is, it can efficiently transmit ciphertexts to a large number of users, and has an advantage in that decoding can be controlled by combining various attributes. The proposed algorithm reduces the network load by greatly reducing the size of the public key, the private key and the cipher text in terms of efficiency, and the decryption operation amount is reduced by half to enable fast decryption, thereby enhancing the operability of the user.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.4
• /
• pp.75-86
• /
• 2020

With the advent of the 4.0 era of logistics due to the Fourth Industrial Revolution, infrastructures have been built to receive the same services online and offline. Logistics services affected by logistics 4.0 and IT technology are rapidly changing. Logistics services are developing using technologies such as big data, artificial intelligence, blockchain, Internet of things, and augmented reality. The convergence of logistics services and various IT new technologies is accelerating, and the development of data management solution technology has led to the emergence of electronic cargo waybill to replace paper cargo waybill. The electronic waybill was developed to supplement paper waybill that lack economical and safety. However, the electronic waybill that appeared to complement the paper waybill are also in need of complementation in terms of efficiency and reliability. New research is needed to ensure that electronic cargo waybill gain the trust of users and are actively utilized. To solve this problem, electronic cargo waybill that combine blockchain technology are being developed. This study aims to improve the reliability, operational efficiency and safety of blockchain electronic cargo waybill. The purpose of this study is to analyze the blockchain-based electronic cargo waybill system and to derive evaluation indicators for system supplementation.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.539-544
• /
• 2021

The tactical data link is a military data network to improve the ability to recognize battlefield situations. The ROK military is promoting the tactical data link performance improvement programs. Tactical data link is essential to combine and integrate various platforms, sensor data, and command and control (C2) systems. Therefore, the research on related technical fields is required. However, the tactical data link has not disclosed detailed technical information due to the characteristics of military operation. In this paper, we propose a data-based automated analysis methodology using intellectual property information to understand the technology trend of tactical data link. In this paper, data related to intellectual property is automatically collected and pre-processed, and analyzed in terms of time series. In addition, the current status of each institution of patent technology information was generated, and the process of identifying key-researchers through network analysis was presented with providing results of our approach in this paper.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.550-557
• /
• 2005

Because each building is built in different time, there exists different equipment to meet the need for each age. Before the announcement of "Community Management Regulation", the old communities usually suffer the problem of lower requirement and living quality. This may bring some security problem that we should face. In this research, we construct "Building Administration System" to provide users a tool to perform a standard operation procedure in community management. This powerful tool will also help manager to effectively handle important tasks in property administrating by reducing unnecessary documentation. In the current regulation, all community committee members shall be voted each year. This will seriously affect the cumulative of management knowledge and cause a worse efficiency. In this research, we use Object Oriented concept and Visual Modeling techniques to combine with Interbase, ER/Studio, and Delphi to develop this management system for Building Property. Through the help of current computing technology, we can solve the problem that can not be inherited and the storing of the huge amount of data. In this system, we develop the modules such as Basic Data Module, Administrative Expense Calculation, Receipt Print, and Inquiring for Inheritance. In this system, we have integrated all houses, parking lots, and public equipments in it. Manager will only need to handle some basic accounting data; the system will automatically handle the rest. Through the help of this system, the community management staff can be easily accomplished and put more manpower on some needed aspect to improve the living quality.