• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.17-27
• /
• 2016

Parial drainage characteristics of clayey silt with low plasticity from the west coast (Incheon and Hwaseong) was analyzed using CPTU based existing correlation equations and compulsory replacement method. Generally, the estimated $OCRs={\kappa}{\cdot}((q_t-{\sigma}_{vo})/{\sigma}^{\prime}_{vo})$ using Powell and Quartman(1988) were higher than those obtained by the oeodometer tests. These trends were noticeable for the layers containing a lot of silty and sand soils. The assessment of partial drainage conditions was performed through Schnaid et al. (2004)'s equation; it is based on plotting the normalized cone resistance, $Q_t$ versus the pore pressure parameter, $B_q$ in combination with the strength incremental ratio, $s_u/{\sigma}^{\prime}_{vo}$ to the CPTU data. It is evident that more than half of the data fall in the range where $B_q$ < 0.3, corresponding to the domain in which the partial drainage prevails when testing normally consolidated soils at a standard rate of penetration (2 cm/s). To estimate the replacement depth of clayey silt with low plasticity, back analysis was carried out to evaluate the internal friction angle based on where the design depths are equal to the checked depths using bearing capacity equation. The internal friction angels obtained from the back analysis tended to increase as the plasticity index decreases, which is ranged approximately from ${\varphi}^{\prime}=2^{\circ}$ to ${\varphi}^{\prime}=7^{\circ}$.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.1
• /
• pp.33-41
• /
• 2013

Background: Prevalence of depression comorbid with neurologic disorders such as Alzheimer' disease (AD), Parkinson's disease (PD) and vascular dementia (VD) is higher than that of primary depression. Antidepressant medications, suggested by many researches for depression comorbid with neurologic disorders such as AD, PD and VD, are mainly selective serotonin reuptake inhibitors (SSRI). Objective: The primary objective of this study is the evaluation of antidepressant drug therapy for AD, PD and VD. Method: This study was a retrospective study based on medical records, carried out for 3 years and 6 months (Jan. 2007~Jul. 2010). Patients, diagnosed as comorbid depression through Beck Depression Inventory (BDI), Cornell Depression Scale (CDS), Geriatric Depression Scale (GDS) among neurologic out-patients of Chungnam National University Hospital because of AD, PD and VD, were selected. The results were evaluated by efficacy and safety of antidepressant drug therapy. Results: In result, the prescribing rates of antidepressants were 30%, 55% and 40% for each AD, PD and VD. Depression cure rates of patients receiving antidepressants vs patients not receiving antidepressants were 40% vs 39%, 33% vs 23% and 38% vs 30% for AD, PD and VD. The frequencies of prescriptoin of SSRI were 21%, 11% and 27% for each AD, PD and VD. The frequencies of prescriptoin of benzodiazepine (BZD) was 61%, 82% and 61% for each AD, PD and VD. The ratio of single BZD prescription was more than that of combination prescription of antidepressants. Tricyclic antidepressants (TCA) were rarely prescribed. The rate of patients with BZD-related side effects was 54%. The most frequent side effects of BZD were dizziness (30%), drowsiness (21%) and headache (16%). Side effects of SSRI were rare. Conclusion: In conclusion, the frequencies of prescription of antidepressants were not common for AD, PD and VD. There was little difference in depression cure rate between patient receiving antidepressants and not receiving. Even though SSRI has to be the highest priority of usage, the frequencies of prescription of SSRI were lower than those of BZD. Additional researches and efforts are required to improve antidepressant drug therapy for neurologic disorders such as AD, PD and VD.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.814-820
• /
• 2005

This study was designed to determine the effect of chitosan on in vivo lipid metabolism in male Sprague-Dawley rats treated with ethanol. Rats were divided into four groups and reared for 6 weeks: E group ($35\%$ of total calories from ethanol), EC I group ($ethanol+0.5\%$ of chitosan), EC II group ($ethanol +1\%$ of chitosan) and control group (dextrin as much as ethanol treated). The levels of serum total cholesterol (TC) and LDL-cholesterol (LDL-C), GOT and GPT in plasma, and triglyceride (TG) in liver were remarkably increased in the rats treated with ethanol. However, the treatment of $1\%$ chitosan significantly lowered those parameter levels. In particular the values of r-HDL (the ratio of HDL-C to TC) in the rats fed in combination with ethanol and chitosan were relatively higher than that of the E group. The increased lipid droplets were observed in the hepatocytes of the rats treated with ethanol, but chitosan treatment reduced in the number and the size of the lipid droplets. These results suggest that chitosan improve in vivo lipid metabolism and Potentially protect hepatotoxicity of the rat liver treated with ethanol.

• Journal of Gastric Cancer
• /
• v.19 no.4
• /
• pp.408-416
• /
• 2019

Purpose: To study the efficacy of capecitabine or S-1 plus oxaliplatin (CAPOX or SOX) for treating thymidine phosphorylase (TP)- or dihydropyrimidine dehydrogenase (DPD)-positive advanced gastric cancer. Materials and Methods: Eighty-six patients with stage IIIC to IV gastric cancer were assessed for TP and DPD expression by immunohistochemistry. The association between CAPOX or SOX efficacy and TP/DPD expression was retrospectively analyzed. Results: There were no significant differences in the objective remission rate (ORR, 52.27% vs. 47.62%; P>0.05), disease control rate (72.73% vs. 73.81%, P>0.05), progression-free survival (hazard ratio [HR], 1.119; 95% confidence interval [CI], 0.739-1.741; P=0.586), and overall survival (OS; HR, 0.855; 95% CI, 0.481-1.511; P=0.588) between CAPOX and SOX. A higher number of stage IV patients showed TP positivity, while DPD-positive patients predominantly showed intestinal type of gastric cancer. In TP-positive patients, the ORRs associated with CAPOX and SOX treatments were 57.14% and 38.10%, respectively; OS was better with CAPOX than with SOX (HR, 0.447; 95% CI, 0.179-0.978; P=0.046). Among DPD-positive patients, the SOX treatment-associated ORR (60.87%) was significantly higher than the CAPOX treatment-associated ORR (43.48%). Furthermore, SOX treatment resulted in better OS than did CAPOX treatment (HR, 2.020; 95% CI, 1.019-4.837; P=0.049). Conclusions: No significant difference in clinical efficacy was found between CAPOX and SOX. TP-positive patients might respond better to CAPOX while DPD-positive patients may respond better to SOX. Our findings might serve as a guide for personalized chemotherapy for gastric cancer.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.119-128
• /
• 1998

This paper describes a filtering algorithm which employs apriori information of SPECT lesion detectability potential for the filtering of degraded projection images prior to the backprojection reconstruction. In this algorithm, we determined m minimum detectable lesion sized(MDLSs) by assuming m object contrasts uniformly-chosen in the range of 0.0-1.0, based on a signal/noise model which provides the capability potential of SPECT in terms of physical factors. A best estimate of given projection image is attempted as a weighted combination of the subimages from m optimal filters whose design is focused on maximizing the local S/N ratios for the MDLS-lesions. These subimages show relatively larger resolution recovery effect and relatively smaller noise reduction effect with the decreased MDLS, and the weighting on each subimage was controlled by the difference between the subimage and the maximum-resolution-recovered projection image. The proposed filtering algoritym was tested on SPECT image reconstruction problems, and produced good results. Especially, this algorithm showed the adaptive effect that approximately averages the filter outputs in homogeneous areas and sensitively depends on each filter strength on contrast preserving/enhancing in textured lesion areas of the reconstructed image.

• Korean Journal of Organic Agriculture
• /
• v.25 no.1
• /
• pp.171-185
• /
• 2017

${\gamma}$-aminobutyric acid (GABA) is a non-proteinogenic amino acid biosynthesized through decarboxylation of L-glutamic acid by glutamic acid decarboxylase. GABA is believed to play a role in defense against stress in plants. In humans, it is known as one of the major inhibitory neurotransmitters in the central nervous system, exerting anti-hypertensive and anti-diabetic effects. In this report, we wanted to enhance the GABA production from the barley leaf and corn silk by culturing them with lactic acid bacteria (LAB). The barley leaf and corn silk were mixed with various weight combinations and were fermented with Lactobacillus plantarum in an incubator at $30^{\circ}C$ for 48 h. After extracting the fermented mixture with hot water, we evaluated the GABA production by thin layer chromatography and GABase assay. We found that the fermented mixture of the barley leaf and corn silk in a nine to one ratio contained a higher level of GABA than other ratios, meaning that the intermixture and fermentation technique was effective in increasing the GABA content. We also tested several biological activities of the fermented extracts and found that the extracts of the fermented mixture showed improved antioxidant activities than the non-fermented extracts and no indication of cytotoxicity. These results suggest that our approach on combining the barley leaf and corn silk and its fermentation with LAB could lead to the possibility of the development of functional foods with high levels of GABA content and improved biological activities.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1705-1714
• /
• 2019

Objective: Reducing roughage feeding without negatively affecting rumen health is of interest in ruminant nutrition. We investigated the effects of roughage sources and concentrate types on growth performance, ruminal fermentation, and blood metabolite levels in growing cattle. Methods: In this 24-week trial, 24 Hanwoo cattle ($224{\pm}24.7kg$) were fed similar nitrous and energy levels of total mixed ration formulated using two kinds of roughage (timothy hay and ryegrass straw) and two types of concentrate mixes (high starch [HS] and high fiber [HF]). The treatments were arranged in a $2{\times}2$ factorial, consisting of 32% timothy-68% HS, 24% timothy-76% HF, 24% ryegrass-76% HS, and 17% ryegrass-83% HF. Daily feed intakes were measured. Every four weeks, blood were sampled, and body weight was measured before morning feeding. Every eight weeks, rumen fluid was collected using a stomach tube over five consecutive days. Results: The mean dry matter intake (7.33 kg) and average daily gain (1,033 g) did not differ among treatments. However, significant interactions between roughage source and concentrate type were observed for the rumen and blood parameters (p<0.05). Total volatile fatty acid concentration was highest (p<0.05) in timothy-HF-fed calves. With ryegrass as the roughage source, decreasing the roughage inclusion rate increased the molar proportion of propionate and decreased the acetate-to-propionate ratio; the opposite was observed with timothy as the roughage source. Similarly, the effects of concentrate types on plasma total protein, alanine transaminase, Ca, inorganic P, total cholesterol, triglycerides, and creatinine concentrations differed with roughage source (p<0.05). Conclusion: Decreasing the dietary roughage inclusion rate by replacing forage neutral detergent fiber with that from non-roughage fiber source might be a feasible feeding practice in growing cattle. A combination of low-quality roughage with a high fiber concentrate might be economically beneficial.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.690-695
• /
• 2018

Advanced oxidation processes (AOPs) composed of O3 and UV were applied to degrade penicillin (PEN). The degradation efficiency was evaluated in terms of changes in the absorbance (ABS) and total organic carbon (TOC). The combination of $O_3/H_2O_2/UV$ and $O_3/UV$ showed the best performance for the reduction of ABS (100% for 9 min) and TOC (70% for 60 min) values, although the mineralization was uncompleted under the experimental condition in this study. The change in biotoxicy was monitored with Escherichia coli susceptibility and Vibrio fischeri biofluorescence. The E. coli susceptibility was eliminated completely for 9 min by $O_3/UV$, and the toxicity to V. fischeri biofluorescence was 57% reduced by $O_3/H_2O_2/UV$. For the ultimate treatment of PEN, it is suggested that an AOP using $O_3/UV$ is followed by biological treatment, utilizing the enhanced biodegradability by the AOP. During 30 min of $O_3/UV$ treatment, the $BOD_5/COD$ ratio as an indication of biodegradability showed about 4-fold increment, compared to that of using a non-treated sample. TOC removal rate for AOP-pretreated PEN wastewater increased 55% compared to that of using the non-pretreated one through an aerobic biological treatment by Pseudomonas putida for artificial wastewater containing 20 mg/L of PEN. In conclusion, $O_3/UV$ process is recommended as a pretreatment step prior to an aerobic biological process to improve the ultimate degradation of penicillin.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.557-568
• /
• 2018

The manufacturing techniques were studied by investigating a precise analysis on wall structure, features of materials and the painting layer of the bracket mural paintings at Daeungbojeon Hall in Naesosa temple. The wall frame is a single-branch structure, and The mural paintings are composed of 3 layers which are a support layer, a finishing layer and a painting layer. The support layer and the finishing layer are an earth wall that sand and clay such as Quartz, Feldspar, and etc. are mixed. The support and the finishing layers have a combination of medium particle sand and smaller than fine particle sand in the approximate ratios of 0.8:9.2 and 6:4, respectively. Therefore, the aforementioned ratio of sand with medium or large particles is relatively higher in the finishing layer than the support layer. As a result of a precise analysis on the painting layer, it has a relatively thick ground layer for painting which is maximum $456.15{\mu}m$ by using Celadonite or Glauconite and the paintings were colored by using pigments such as Atacamite, Kaolinite or Halloysite, Oxidized steel, and etc. on it. The manufacturing style and the painting techniques of an earth wall are included in the category of the Joseon Dynasty style that have been studied up to now, but the facts that the finishing layer has a high content of sand and a middle layer and chopped straw have not been identified. These are remarkable points in terms of structure and materials, and can be crucial in the evaluation of the state of conservation of mural paintings or preparation of a conservation plan.