• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.322-328
• /
• 2006

In this paper, The impulse un-tripping characteristics and the electro magnetic compatibility characteristics are compared with each other. The performance of impulse un-tripping test exists at domestic standard (KSC 4613). However test items are insufficient because the more test items such as EMC exist at international standard (IEC). Also, Electric Appliances Safety Certificate has taken the certificate test since July 2004 in Korea but did not confirm the EMC performance for RCCBs made in Korea. Thus, in this paper, We experiment with Oscillatory waves immunity test and the 7 EMC tests for 32 RCCBs of 4 types (mini, home standard, plug, outlet) for 16 brands according to IEC standard 61009-1 and 61008-1. As a result, 24 RCCBs proved to be poor for surge immunity test. However the RCCBs operating incorrectly for surge immunity test operate correctly for oscillatory waves immunity test. Thus, the correlation between oscillatory waves immunity test and EMC test is little and standard for compatibility of combination surge at IEC 61000-4-5 should be added to KS standard as soon as possible.

• 조명전기설비학회논문지
• /
• 제14권6호
• /
• pp.18-25
• /
• 2000

본 논문에서는 과도전압과 전원선 방해파로부터 가전기기틀 안전하게 보호할 수 있는 전자파 대용 단위세대 분전반의 설계 및 제작에 대하에 기술하였다. 제안한 분전반은 바리스터, 캐패시터 및 간선도채의 인덕턴스로 구성한 과도전업 차단장치와 전자파 필터를 내장하고 있다. 시제작한 분전반은 IEC 규격의 조합형 서지 발생장치와 회로밍 분석키를 이용하여, 과도전압에 대한차단특성과 전원선 방해파의 감쇠특성을 평가하였다. 실험 결과로부E] 본 연구에서 제안한 분전빈은 IEC 61000-4-5에 규정한 서지내생기준을 만족하였으며, 150[kHz]-30[MHz] 대역의 전원선 방해파에 대해 20[dB] 이상의 감소효과를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1822-1824
• /
• 1996

Damage and upset of control and communication equipment due to transient overvoltages which occur due primarily to internal switching surge and external lightning surge are an important problems in electromagnetic compatibility(EMC). In this paper, we analyzed operation characteristic of metal oxide varistor widely used low voltage AC line using the electromagnetic transients program(EMTP) and compare it with experimental results and also, we modeled combination generator producing $1.2/50{\mu}s$ open circuit voltage and $8/20{\mu}s$ short circuit current as a source which is critical in calculating operation characteristic. Simulation results showed that most of Transient energy consumes at MOV located in service entrance side than load side, and it showed similar to experimental results. Therefore, entrance side MOV should be selected more energy capacity than that of load side MOV.