• Current Research on Agriculture and Life Sciences
• /
• 제31권1호
• /
• pp.56-60
• /
• 2013

본 연구에서는 소비자의 새로운 색상에 대한 다양한 욕구를 충족시키기 위하여 백색 장미 데니스(R. hybrida 'Denice')를 사용하여 무지개 색상의 장미를 만들고자 하였다. 온도가 높을수록 염색 시간은 빨랐으나 높은 온도에서는 절화의 개화가 빠르게 진행되었으며, 4시간 이상에서는 꽃잎의 끝이 너무 진하게 염색되거나 건조되는 현상이 나타났다. $7.5g{\cdot}L^{-1}$보다 $11g{\cdot}L^{-1}$ 이상의 염료농도에서 염색되는 속도가 빨랐으나 큰 차이는 없었다. 개화정도는 완전봉오리에서 시각적으로는 빨리 염색이 되는 것으로 보였으나 속 꽃잎까지 흡수되는 시간은 3처리 모두 유사하였다. 그러나 상품가치 면에서는 바깥꽃잎이 3~4장 정도 개화했을 때가 가장 적합하다고 판단되었다. 단색 실험의 결과에서 가장 적합한 조건 즉, $20^{\circ}C$염료 용액에 3시간 침지, 화경장 30cm, $11g{\cdot}L^{-1}$의 염료 농도, 바깥 꽃잎이 3~4장 개화한 'Denice' 장미에 Hot Pink, True Blue, Yellow 3가지 색상을 조합하여 염료를 물올림 한 결과, 6가지 색상을 지닌 무지개색의 장미를 착색, 발현시킬 수 있었다.

• 보존과학회지
• /
• 제33권6호
• /
• pp.431-442
• /
• 2017

본 연구는 양산 통도사 괘불탱의 손상 및 채색 상태 유형에 대한 자료를 확보하고, 비파괴 방법과 박락된 시편의 교차분석을 통한 채색 안료의 종류를 밝혀내고자 하였다. 괘불탱의 손상 유형을 확인한 결과, 꺾임과 접힘, 들뜸, 결실, 박락 등이 관찰되었다. 채색 안료 분석 결과, 적색 계열의 안료는 연단과 진사, 유기 안료가 사용되었고, 녹색 안료는 공작석과 염화동(녹염동광)을 사용하였으며, 청색 안료는 석청과 군청, 백색 안료는 연백과 활석을 혼합하여 사용하였다. 또한, 황색 안료는 연백과 유기 안료를 혼합하여 사용하거나 연백 위에 유기 안료를 덧칠하였으며, 흑색 안료는 먹을 사용 했을 것으로 추정된다. 박락된 시료를 수습하여 안료의 입자상태 분석을 통해 녹색안료의 결정형을 쉽게 구분할 수 있었으며, 진한청색과 연한청색도 마찬가지로 입자의 크기나 형태가 원료의 상이함에 따라 서로 다름을 확인하였다. 또한, 황색과 자색은 입자감이 없는 유기안료를 사용하였으며, 특이하게 어두운 적색은 주황색과 먹을 혼합하여 사용한 것으로 확인되었다.

• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.10-18
• /
• 2009

Dyeing process of the natural indigo powder onto ramie and silk fabrics was investigated by using glucose and calcium hydroxide as a reducing system. Effect of reduction and dyeing conditions such as temperature and time of reduction/dyeing, and concentrations of glucose and calcium hydroxide on the dyeing process were explored. Indigo powder was obtained by drying the conventional niram paste in an oven at $50^{\circ}C$. Color strength of the dyed fabrics was evaluated by K/S value measured at the wavelength of maximum absorption(${\lamda}$max). Munsell color coordinates(H V/C) were used to compare fabric colors of ramie and silk. Ramie fabric showed purple-blue color for all the temperature and time. On the contrary, silk fabric showed wide range of color including brown, brown-green, green at the different temperature. With the increase of K/S value, the coordinate of value(lightness) decreased for both of ramie and silk fabrics. The coordinate of hue(shade) changed drastically with the increase of K/S value for silk fabric, compared with that of ramie fabric which showed nearly constant value at the whole range of K/S value. Optimum concentrations of calcium hydroxide were for 6 g/L for ramie and 4 g/L for silk at $60^{\circ}C$ and 50 min. K/S value increased with the indigo concentration. Maximum K/S value was shown at $10{\sim}12$ g/L of glucose concentration. For both of ramie and silk fabrics, the colorfastness of washing and light was lower than that of rubbing. All the colorfastness values were improved with the increase of color strength.

• 한국염색가공학회지
• /
• 제34권4호
• /
• pp.224-233
• /
• 2022

Recently, consumer tastes of various classes at home and abroad prefer comfortable, unadorned, and simple clothing, and the athleisure trend, which can be used freely in daily life as well as exercise, has expanded to overall clothing products. Existing materials used for athleisure are composite knitted fabrics using polyester yarn and PU yarn, which has problems due to a chronic lack of color fastness and contamination by dyes even when PU laminating is applied, making it difficult to apply various colors. There is a quality problem in which deformation of the product occurs due to lack of durability. In this study, CDP yarn(75de/72f) and PU yarn(40de) were selected to commercialize the circular knitting for athleisure using CDP yarn in order to solve the problems that occur in the dyeing and laminating process when using polyester materials. CDP yarns were used to knit into single(CP75-S) and double(CP75-D) knit and single knit were found to be suitable as athleisure fabrics. After pretreatment and treatment under various conditions, the stainability of CDP circular knitting was examined. After pretreatment and dyeing process under various conditions, the property of scouring and dyeability of CP75-S were evaluated.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.496-504
• /
• 2006

This study was conducted for silver generation women, age 60 and more. Questionnaire was answered by the total 291 of women. Frequency analysis, t-test, ANOVA and Duncon-Test have been completed by using SPSS 12.0 tool. The conclusion of the study is below. First, silver generation women live in Seoul and South Gyeongsang Province. The data shows huge academic background gab among regions. Second, the following is the preferences found by 15 stimulants which expert groups identified based on demography. People in South Gyeongsang Province like default, tailored, three-button jacket more. People in South Gyeongsang Province prefer to Chanel jackets and people in their 70s prefer to it than in 60s, stand collar casual jacket for color and material, and the less they are educated, the more they like the jackets. And those who have less personal expenses tend to prefer to it. South Gyeongsang Province shows preference for semi polo-neck sweater. Highly educated did not show any preference for it. Women in their 70s tend to like blouses with round neckline. The data shows there is significant difference of preference for design, color and material for coloration vest between education levels. The less educated tends to like it. People in South Gyeongsang Province and those who live with their children are in favor with half sleeve jackets for colors and materials. All in Seoul and South Gyeongsang Province do not like three-quarter-length sleeve jackets because those jacket have wide and deep plunging neckline. The study showed people living in Seoul, in their 60s, highly-educated tend to favor polo shirts significantly. Seoul favor basic straight pants and people with any level of education excluding elementary prefer to it. The highly-educated and those who have a bigger allowance tend not to prefer to baggy trousers. In conclusion, Fifteen incentives (clothing design) for semi polo-neck sweaters, polo t-shirts, basic straight pants are more proper to silver generation women in their 60s, living in Seoul. Other designs are desirably applicable to customers on a national scale at middle prices.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.216-226
• /
• 2018

The combination dyeing have been attempted to get the various color. The objective of this research was to study the color developing effects on cotton fabrics dyed with persimmon, catechu and combination of the both by heat treatment process. These dye were applied on bleached cotton fabrics for the dyeing before post mordanting with aluminium potassium sulfate, copper sulfate, and iron sulfate. The various color changes on cotton fabric were measured by color spectrophotometer. The heat treatment of temperature around $150^{\circ}C$ for an hour can reach the highest color developing. The dyed fabrics with mordanting were heated for specific time period, which was compared without the mordanting. The post mordanted fabrics showed that more various colors can be obtained using combination dyeing. K/S values of dyed fabrics with Al, Fe, and Cu mordants were higher than the cases without mordants. The Cu mordanted fabric showed very effective color developing by the heating process. The fabrics dyed with catechu lowered L* value with little changes in a* and b* values, while the a* and b* values became higher with heat treatment. The fabrics dyed with persimmon has the lowest L* value and more changes in a*, b* value with heating process. Therefore, K/S values can be increased effectively by the combination dyeing of persimmon and catechu. Colorfastness to washing in color change was grade 2-3 in non-mordanted fabric, and grade 3 in mordanted fabric. Lightfastness of the dyed fabrics was above grade 4.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.709-725
• /
• 2021

The study focused on the design features of Chanel and Fendi, directed by Carl Lagerfeld, creative director of Chanel and Fendi until his recent death. The range of the study was from the 2017 S/S Collection to the 2019 F/W Collection, which collected a total of 767 fashion photographs, including 483 Chanel, 284 Fendi, with tops, bottoms and dresses at VOGUE (https://www.vogue.com). According to the data analysis criteria organized based on prior research and related literature, it was classified in the order of form, color, material, pattern, decoration, fashion image, item and coordination, and content analysis was conducted based on statistical analysis. Overall, the design characteristics of the Chanel collection, directed by Karl Lagerfeld, were rectangle form, tone in tone coloring, combination of identical materials, geometric patterns, and classical images as the main design characteristics of the Chanel collection. The design characteristics shown in the Fendi collection directed by Karl Lagerfeld were rectangle form, tone in tone coloration, hard material combination, abstract pattern, and total coordination. Comparing the design features of Chanel and Fendi, directed by Karl Lagerfeld, is as follows. Chanel and Fendi's designs show a lot of rectangle form, tone-in-tone colors, hard-materials and combination of the same material.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.65-69
• /
• 2013

PET fabrics of various luster, fiber thickness(denier), and weaving structure were dyed at the same conditions and determined their grey scale by using naked eyes, computer color matching (CCM) system, and real industry color (RIC) device to evaluate the effectiveness of RIC device developed in this study. As for the luster of fabrics, bright PET showed more differences when compared with semi-dull and full-dull. PET in both naked eyes and RIC device since the RIC device provide the real image of fabrics to observers. As for the fiber thickness, the results of naked eyes and RIC device were very similar while the result of CCM showed lower color grade. Finally, as for the weaving structures of PET fabrics, all the test results by naked eyes, CCM, and RIC device showed almost same grey scales. In these regards, the RIC device developed in this study was comparable to naked eyes by providing the real image of fabrics, however it was difficult to compare the very bright colors such as yellow and fiber thickness(denier) and weaving structure of fabrics.

• 한국의류산업학회지
• /
• 제15권5호
• /
• pp.808-814
• /
• 2013

In this study, The mixture of three kinds of pre-treatment agents, Carboxymethyl cellulose sodium salt(CMC), Sodium alginate and Dextrin, have been prepared for the better coloration of digital textile printing. To get sharpness of outline during digital printing process, the optimal formulation is the CMC and Sodium alginate mixture 1:1 ratio by volume. Cyan, Yellow, and Black colours are excellent on the Sodium alginate mixtures. But, Magenta is excellent in the CMC and Dextrin mixture. Sharpness and printability are closely related to viscosity of the mixture. The most optimal sharpness of outline achieved with a consideration of coloring, and field operations account for production when the viscosity of the mixed pre-treatment agent approximately is 10~13 cSt. Change in shade and staining of wash fastness for all the treated samples with the mixtures rated 4-5 grade. Both dry rubbing fastness to shade change and staining are good in the treated samples, whereas wet rubbing fastness rated 2-3 grade. To improve wet rubbing fastness, the Sodium alginate and Dextrine mixture, which rated 3-4 grade for Black color, is applicable. With exception of 3 rating to black color, Light fastness is 4 rating for the remaining three colors in the regardless of treatment condition and mixing of the pre-treatment agent. Dry cleaning fastness of all samples are also 4-5 rating.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.135-145
• /
• 2022

In this study, the dyeability of 0.06-denier-per-filament (dpf) ultrafine sea-island-type nylon knitted fabric was investigated and compared with that of 1.0-dpf general nylon with respect to four types of dyes. In particular, leveling, milling, half-milling, and metal-complex dyes were compared at concentrations of 0.5%, 1.0%, 2.0%, 4.0%, and 8.0% on-weight-fabric (o.w.f). In each case, staining was performed at 100 ℃. The dyeabilities of the materials were compared in terms of the depth of color as defined by the ratio of the absorption coefficient (K) to the scattering coefficient (S). Results indicated generally low K/S values for both the 0.06-dpf ultrafine sea-island-type nylon and 1.0-dpf general nylon. In terms of the dye type, the milling and half-milling dyes exhibited K/S values of ≥20 for all colors of yellow, red, and blue for the 0.06-dpf ultrafine yarn sea-island-type nylon, which were superior to those of the other dye types. Hence, the milling and half-milling dyes are considered more suitable than the other dyes. Further, a comparison of dye fastness and compatibility revealed that the half-milling dye was the most suitable dye for the 0.06-dpf ultrafine sea-island-type nylon.