• The Korean Journal of Mycology
• /
• v.31 no.1
• /
• pp.40-43
• /
• 2003

Symptoms similar to anthracnose were observed on Amaranthus mangostanus in Sancheon-gun, Gyeongnam province, where the plants were autogenously formed community. The symptoms were appeared in stem and spread, eventually whole plants died. Mycelial colony of the isolate was whitish gray to dark gray on potato dextrose agar. Conidia were single celled, colorless, cylindrical and measured as $10.5{\sim}21.7{\times}3.8{\sim}6.0{\mu}m$. Appressoria were dark brown, ovate to obovate and sized as $5.6{\sim}13.7{\times}4.6{\sim}11.4{\mu}m$. Perithecia were brown to black in color and shaped as globose to obpyriform and sized as $79.7{\sim}286.7{\mu}m$. Asci had eight ascospores and sized as $47.7{\sim}89.7{\times}8.1{\sim}13.3{\mu}m$. Ascospores were slightly curved at the center cylindrical, fusiform and measured $9.3{\sim}20.3{\times}4.6{\sim}6.3{\mu}m$. Optimum temperature for growth was $30^{\circ}C$. On the basis of morphological characteristics and pathogenicity test to host plants, the fungus was identified as Glomerella cingulata. This is the first report on the Anthracnose of Amaranthus mangostanus caused by Glomerella cingulata in Korea.

• Korean Journal of Optics and Photonics
• /
• v.29 no.3
• /
• pp.119-125
• /
• 2018

Hydrogen gas is an important and promising energy resource that has no emissions of pollutants during power generation. However, hydrogen gas is very dangerous because it is colorless, odorless, highly flammable, and explosive at low concentration. Conventional techniques for hydrogen gas detection are very difficult for measuring the hydrogen gas distribution at long distances, because they sample the gas to measure its concentration. Raman lidar is one of the techniques for remotely detecting hydrogen gas and measuring the range of the hydrogen gas distribution. A Raman lidar system with an on-axis optical receiver was developed to improve the range of hydrogen gas detection at long distance. To verify the accuracy and improvement in the range of detecting the hydrogen gas, experiments measuring the hydrogen gas concentration are carried out using the developed on-axis Raman lidar system and a gas chamber, to prevent explosion of the hydrogen gas. As a result, our developed on-axis Raman lidar system can measure a minimum hydrogen gas concentration of 0.66 volume percent at a distance of 50 m.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.399-404
• /
• 1998

Genipin was obtained from hydrolysis of geniposide isolated from gardenia fruits with ${\beta}-glucosidase$. Reaction of genipin with glycine, alanine, histidine, lysine, phenylalanine and glutamate in aqueous buffer solution converted colorless starting materials to blue pigments. Effect of pH for the formation of blue pigments was tested using UV/Vis spectrophotometer. The optimum pH for the formation of blue pigments was 7.0. No pigment and trace amounts were formed at acidic (pH 3.0) and alkaline (pH 12.0) conditions, respectively. The amount and tincture of blue color were distinct with different amino acids. In contrast with lysine $({\lambda}_{max}=573\;nm)$, glycine $({\lambda}_{max}=595\;nm)$, phenylalanine $({\lambda}_{max}=602\;nm)$ and alanine $({\lambda}_{max}=595\;nm)$, the reaction of genipin with histidine $({\lambda}_{max}=601\;nm)$ and glutamate $({\lambda}_{max}=601\;nm)$ produced relatively small amounts of blue pigments. Rate constants for the formation of blue pigments from genipin with amino acids at various temperatures $(60,\;70,\;80,\;90^{\circ}C,\;pH\;7.0\;phosphate\;buffer)$ were obtained. Rate constants of genipin with basic amino acids were larger than neutral or acidic amino acids. Arrhenius activation energies of the formation of blue pigments indicated that activation energy of glycine $(E_A=9.8\;kcal/mol)$ was especially lower than those of other amino acids $(E_A=13.3{\sim}15.4\;kcal/mol)$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.12-20
• /
• 2010

Metamictization and color change in zircons from Cambodia and Tanzania were investigated. Elements analysis to detect radioactivity of elements such as U and Th, and spectroscopic analysis using UV-VIS and Fourier transform infrared spectroscopy were performed. According to the UV-VIS spectroscopic analysis, it was perceived that many and high intense absorption peaks appeared in blue and colorless zircons, while less and low intense absorption peaks appeared in uranium contained green and yellow zircons. It was found that those stones have made progress to the metamictization. After heat treatment, we could detect opposite results. As the results of FTIR spectroscopy analysis, in the metamict green and yellow zircon, it is showed that 3-phonon combination mode bands of $[SiO_4]^{4-}$ internal vibration in the region of 3100~3400 $cm^{-1}$ are broad and some of them disappear. However, the disappeared bands are observed again due to restored crystal lattice by the heat treatment. Also, $U^{4+}$ peaks that can detect the uranium content in zircon appears at near 4800 $cm^{-1}$ in the green and yellow samples. From this investigation, we could observe the metamictization effect and color change in uranium-bearing zircon by heat treatment using spectroscopic analysis.

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.15-24
• /
• 1999

From January 1997 to May, the red marbled rockfish, Sebastiscus tertius (Barsukov et Chen) was reared in the laboratory, and observed the morphological characteristies of egg and development of larvae and juveniles. The egg is spherical in shape colorless and transparent, measuring 0.72~0.80mm in diameter (mean 0.75mm, n=50). The naturally bearing larvae were 3.79~3.97mm in total length with 7~8＋15~16=22~24 myomeres, and mouth and anus were open. Melanophores were present on the yolk of the larva and ventral margins of the tail. The 1~2 days after bearing larvae measured 3.90~4.13mm in total length, and transformed to postlarval stage, and yolk sac were completely resorbed. On the lower jaw melanophores were present. Total length of the larvae was 4.23~4.60mm in total length (11 days after bearing), number of elongated pectoral fin rays was 9~10, and melanophores distributed on the top of head, around the intestine tube, ventral margins of the tail and on the pectoral fin. In 21 days after bearing, the larva were 5.83~7.10mm in total length, and the caudal notochord flex $45^{\circ}$. Individuals of 9.80~12.36mm in total length (33 days after bearing) are regarded to have reached to the juvenile stage with all the fins were developed.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.570-574
• /
• 2011

Large colorless single crystals of analcime with diameters up to 0.20 mm have been synthesized from gels with the composition of $3.00SiO_2$ : $1.50NaAlO_2$ : 8.02NaOH : $454H_2O$ : 5.00TEA. The fully $Na^+$-exchanged analcime have been prepared with aqueous 0.1 M NaCl (pH adjusted from 6 to 11 by dropwise addition of NaOH). The single-crystal structure of hydrated $|Na_{0.94}(H_2O)|[Si_{2.06}Al_{0.94}O_6]$-ANA per unit cell, a=13.703(3) ${\AA}$, has been determined by single-crystal X-ray diffraction technique in the orthorhombic space group Ibca at 294 K. The structure was refined using all intenties to the final error indices (using only the 1,446 reflections for which $F_o$ > $4{\sigma}(F_o))R_1/wR_2$ = 0.054/0.143. About 15 $Na^+$ ions are located at three nonequivalent positions and octahedrally coordinated. The chemical composition is $Na_{0.94}(H_2O)Si_{2.06}Al_{0.94}O_6$. The Si/Al ratio of synthetic analcime is 2.19 determined by the occupations of cations, 14.79, in the single-crystal determination work.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.385-393
• /
• 2009

The spectroscopic characteristics of Madagascar tourmaline were investigated by UV-Vis and FTIR spectroscopy. Physical features were similar to other region's tourmalines. The green and blue samples showed strong absorption band in the 714~743 nm due to $Fe^{3+}$, pink samples showed strong absorption band in the 510~530 nm due to $Mn^{3+}$, brown samples showed strong absorption at 324 nm due to $Mn^{2+}-Ti^{4+}$ IVCT and the colorless samples only revealed weak absorption at 406~413 nm or no absorptions due to low quantity of Mn. Combination of the stretching and bending mode cationic hydroxyl units (metal-OH) are observed in the 4300~4500 $cm^{-1}$. The parallel tube-shaped inclusions which contain hematite were detected generally. This investigation revealed that Cu was not detected but Fe and Mn were detected in the Madagascar tourmalines, and the various colors appear according to the amount of those impurity elements.

• Tuberculosis and Respiratory Diseases
• /
• v.76 no.2
• /
• pp.75-79
• /
• 2014

Trichloroethylene (TCE) is a toxic chemical commonly used as a degreasing agent, and it is usually found in a colorless or blue liquid form. TCE has a sweet, chloroform-like odor, and this volatile chlorinated organic chemical can cause toxic hepatitis, neurophysiological disorders, skin disorders, and hypersensitivity syndromes. However, the hypersensitivity pneumonitis (HP) attributed to TCE has rarely been reported. We hereby describe a case of HP associated with TCE in a 29-year-old man who was employed as a lead welder at a computer repair center. He was installing the capacitors on computer chip boards and had been wiped down with TCE. He was admitted to our hospital with complaints of dry coughs, night sweats, and weight losses for the past two months. HP due to TCE exposure was being suspected due to his occupational history, and the results of a video-associated thoracoscopic biopsy confirmed the suspicions. Symptoms have resolved after the steroid pulse therapy and his occupational change. TCE should be taken into consideration as a potential trigger of HP. Early recognition and avoidance of the TCE exposure in the future is important for the treatment of TCE induced HP.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.171-181
• /
• 2012

The demand characteristics of the conventional 12 kinds of epoxy resins which have been used for restoration of the ceramic relics were investigated to provide standards of the effective materials in this study. The result of durability analysis showed that a liquid type is more effective in ceramic relics (low damage, high strength), and a paste type is more effective in earthenware relics (high damage, low strength). The result of workability analysis appears that the liquid type is higher than the paste type, and a slow curing type is higher than a fast curing type in surface hardness. Therefore, in the case of the liquid type which is hard to reprocess due to high surface hardness, it is necessary to conduct a study on improving physical properties by adding filler. The result of the gloss analysis on epoxy resins showed that the liquid type (colorless) has higher gloss than the paste type, and the slow curing type has higher gloss than the fast curing type in liquid types. CDK-520A/520B and Araldite SV 427-2/HV 427-1 showed the most similar gloss to $700^{\circ}C$ earthenware, Devcon 5 minute, EPO-TEK 301-2, and Quik Wood showed the most similar gloss to celadon and whiteware, Quik Wood, EPO-TEK 301-2, and Devcon 5 minute showed the most similar gloss to buncheongware. It is necessary for conservator to decide the range of the restoration surface by predicting the increase and decrease of the restoration surface because most of the epoxy resins caused the volume change in curing process.