• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.12
• /
• pp.135-146
• /
• 1993

A ner general multi-layer area router, called DINOSAUR, is presented in this paper. DINOSAUR can route various types of routing areas, such as L-shaped channel, switchbox with/without obstacles, and rectilinear area with/without internal modules/terminals. The DINOSAUR algorithm consists of three major stages: layerless maze routing, layering by coloring, and rip-up and reroute. In layerless maze roution stage, the route of each net is determined by modified maze algorithm without taking the conflicts(short. circuits) into account. In layering by coloring stage, the layer of each net is determinde by a heuristic coloring algorithm. When the conflicts are not removed, rip-up and reroute process is invoded. In rip-up and reroute stage, the conflicts are removed iteratively. Many test cases have been run, and on all the benchmark data known in the literature DINOSAUR has performed either better than or comparable to the other routers.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1022-1028
• /
• 1997

This work was performed to study the characteristics of electrochemical intercalation reactions occurring at the interface between the organic electrolyte and tungsten trioxide thin film (thickness of $4000{\AA}$) prepared by e-beam evaporation method as cathodically coloring oxide with regard to the electrochromism by the intercalating reactions of the lithium cation in the 1M $LiClO_4/PC$ organic solution. The characteristics of electrochemical intercalation reactions were investigated by various DC electrochemical methods such as cathodic Tafel polarization test, multiple and the single sweep cyclic voltammetry and the coulomety titrations method. The surfaces of thin films were observed with the patterns of X ray diffraction after the coloring and bleaching reactions. In comparison with the previous results that $WO_3$ thin film intersely detached from the surface of electrode when the hydrogen cation was intercalated into $WO_3$ thin film in the o.1N $H_2SO_4$ aqueous solution, the intercalation reaction of lithium cation into $WO_3$ thin film in the 1M $LiClO_4/PC$ organic solution was shown that the stable bleaching and coloration was appeared within 1.0V of the applied overpotential. When the overpotential of electrochromic reaction for lithium cation in the 1M $LiClO_4/PC$ organic solution had been applied up to 1.5V, the accumulation phenomenon of lithium in amorphous $WO_3$ thin film layer occurred because the inserted lithium into amorphous $WO_3$ thin layer for coloring process was not fully removed from the thin layer to the electrolyte during bleaching process. It was found that there is a limitation of applied overpotential for coloring process by the reduction of the current densities of bleaching and coloration after few number of coloring and bleaching cycles.

• Journal of Fashion Business
• /
• v.6 no.3
• /
• pp.41-51
• /
• 2002

The author of the paper investigated the changes of hairstyle along the developments in hairdressing industry in the 20th century. The development process of hairdressing industry was divided into four periods of introduction, origination, growth, and establishment. The corresponding changes of hairstyle were analyzed and the findings are as follows. 1. Hairstyle could be classified into such typical ones as traditional style, cut, bob, wave, permanent wave, up style, and hair coloring. 2. Fashion leaders affected the changes of hairstyle. 3. Whenever hairdressing appliances were introduced, new hairstyle was practiced as follows with the use of the appliances. (1) Introduction Period - Traditional Style : Chignon, pigtail ribbon $\rightarrow$ Variations were designed in hair length or split due to the limited availability of appliances. - Up Style : Pompadour, thick and up hair, encircling hair $\rightarrow$ Padding was used for sweep-up. (2) Origination Period - Bob Style : Women's first bob style. - Wave style : Wave with bob, close-cropped hair, up style $\rightarrow$ Iron, set, permanent devices were used. (3) Development Period - Wave Style : Wind wave, easily manageable wave $\rightarrow$ Blow dry, body permanent were used. (4) Establishment Period - Straight Style : Use of straight permanent. - Thick Wave Style : Development of various kinds of rod. - Hair Coloring : Advent of diverse fashion hair coloring, apart from the coloring of white hair, with the introduction of color TV. - Bob Style : Romantic bob style $^{\circ}\hat{E}$ Use of clippers and thinning scissors. Thus, the changes of hairstyle according to the development in hairdressing industry had close relationship with the improvement in hairdressing appliances.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.450-455
• /
• 2016

Color change in single-crystal, yellow, red, purple, and colorless cubic zirconias (CZs) was investigated as a function of annealing in vacuum and air atmosphere at $800-1400^{\circ}C$ for 30 min, for development of a damascene process of plugging a precious metal paste at the elevated temperature. Coloring-element contents of the CZs were evaluated using WD-XRF, and the color change determined visually by naked eye, and using a digital camera and UV-Vis-NIR color analyzer. WD-XRF showed that all of the CZs had cubic-phase stabilizer elements and coloring elements. All CZs that underwent vacuum annealing exhibited a slight color change at $<900^{\circ}C$, while their colors began to change to black at $1100^{\circ}C$, and became opaque black at $1400^{\circ}C$. After air annealing, there was almost no color change up to $1400^{\circ}C$. Since red and purple CZs showed greater color difference (CD) values than the others, the degree of CD is likely to depend on the original color of the CZ due to the different stabilities of their coloring elements during annealing. Based on our results, it is suggested that annealing in air at $<900^{\circ}C$ is advantageous, and assorted colored CZs can be used for precious metal damascene.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.422-424
• /
• 2008

A serious problem of the 21st century is the supply of energy resources. Reserves of fossil fuels are facing depletion: renewable energy resources must be developed in this era. Dye sensitizedsolar cells(DSC) have been very economical and easy method to convert solar energy to electricity. DSC can reach low costs in future outdoor power applications. However, to commercialize the DSC, there are still many shortages to overcome. When the DSC is commercialized in the near future, the productivity is an important factor. In the process of soaking in a dye, it usually takes $12\sim24$ hours. In this study, we varied the dye coloring temperature from $0^{\circ}C$ to $60^{\circ}C$. At the temperature of $40^{\circ}C$, DSC cell showed the best performance. We also expect the reduction of the time soaking in a dye. Counter electrode surface of DSC is deposited by RF magnetron sputtering under the conditions of Ar $2.8{\times}10^{-3}$ torr, RF power of 120W and substrate temperature of $100^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1102-1110
• /
• 2005

In this paper, we proposed a advanced approach to resolve the trade-off problem for the threshold value determining the photo-consistency in the previous algorithms. The threshold value for the surface voxel is substituted the photo-consistency value of the inside voxel. As iterating the voxel coloring process, the threshold is approached to the optimal value for the individual surface voxel. we present an energy minimization formulation of the binary labeling problem that surface voxels classify into opacity or transparency. The energy formula consists of the data term and the smoothness term. As considering neighboring voxels in the labeling problem, the unevenness of reconstructed surface is reduced. The labeling whose energy is the global minimum can be computed using a graph cut.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.5
• /
• pp.665-674
• /
• 2014

An analysis of the components of clay mineral before and after coloration (XRF) showed that the elements involved in coloration are Fe, Cr, and Ni. Fe accounts for 65% of coloring components on dyed fabric; in addition, Cr and Ni also affect coloring. The optimal coloration condition was to repeat the process of immersing the cotton fabric in $80^{\circ}C$ slurry of 8g of clay mineral to 1g cotton for 60 minutes, dry it for 24 hours and rinse three times. Especially, as the repetition of coloration increased, the $(K/S)_{440}$ value of sample A increased from 1.0 to 2.5, and sample B increased from 1.0 to 1.6. The effect of the repeated process on coloration was significant; consequently, the rinsing and drying process were important to decrease the coloration level. It also showed excellent results in regard to color fastness to washing, light, rubbing, perspiration, and antibiotic effect.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.52-60
• /
• 2008

A simple Time Division Multiplex(TDM) switching system which has been widely in satellite networks provides any size of bandwidth for a number of low bandwidth subscribers by allocating proper number of time slots in a frame. In this paper, we propose a new approach based on graph coloring model for efficient time slot assignment algorithm in contrast to network flow model in previous works. When the frame length of an initial matrix of time slot requests is 2's power, this matrix is divided into two matrices of time slot requests using binary divide and conquer method based on the graph coloring model. This process is continued until resulting matrices of time slot requests are of length one. While the most efficient algorithm proposed in the literature has time complexity of $O(N^{4.5})$, the time complexity of the proposed algorithm is $O(NLlog_2L)$, where N is the number of input/output links and L is the number of time slot alloted to each link in the frame.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.651-657
• /
• 2012

In the Busan North port redevelopment project, which is the first large scale port redevelopment project in this country, it adopted the national landscape plan for competitiveness of port city. Furthermore, it includes many efforts on landscape formation in the process of improvement of ocean city image and enhancement of its value, which fits for the situation and characteristics of the original nature, history, and culture resources, together with all facilities, structures, symbols, and eco green belt. Firstly this study attempted to analyze the characteristics of Busan landscape, Busan city design plan(2010), especially coloring plan, together with the case study of landscape color plan for foreign countries. From the basis of this analysis, it was proposed a landscape enhancement strategy in the Busan North port redevelopment project through the coloring plan and it is expected that the result would be used for the basic data for other redevelopment project.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.5
• /
• pp.325-329
• /
• 2002

We investigated the oxide thickness and color evolution with the oxidation temperatures between $370^{\circ}C$ and $950^{\circ}C$ for 30 minutes in an electric furnace. Oxide thickness and color index were determined by cross sectional field emission scanning electron microscopy (FESEM) images and digital camera images, respectively. We confirmed that thermal oxidation was suitable for the mass production of color-titanium products, while coloring process window was narrow compared with anodizing oxidation process.