• Textile Coloration and Finishing
• /
• v.15 no.5
• /
• pp.321-326
• /
• 2003

In order for disperse dye based ink to be fitted with the critical requirements of ink jet printing, this study was undertaken to investigate the effects of 6 different dispersants on the milling efficiency of insoluble dye particles and dispersion stability of the final ink. It was found that a polystyrene dispersant with high molecular weight exerted relatively better dispersion stability which may be associated with its steric stabilization effect in the ink solution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.4
• /
• pp.337-342
• /
• 2012

A feeding trial was conducted to investigate effect of three paprika levels (0%, 5% and 10%) with two lipid levels (4% and 10%) in diets on growth performance and skin coloration of red- and white-colored fancy carp, Cyprinus carpio var. koi. Two replicate groups (an average body weight of $4.3{\pm}0.2g$) of fish fed one of eight experimental diets for 8 weeks. Survival, weight gain and feed efficiency of the fish were not significantly affected by both dietary paprika and lipid levels (P>0.05). After 8 weeks feeding period, the values of $a^*$, $L^*$ and $b^*$ of fish skin were significantly changed by dietary paprika level (P<0.05) but not lipid level. The $a^*$ value of fish fed the diets containing paprika was higher than that of fish fed control diet (P<0.05). Additional inclusion of 50-100 ppm canthaxanthin in diets containing 5% and 10% paprika did not improve $a^*$ value of fish skin. Based on the results of this study, it can be concluded that dietary inclusion of 5% paprika powder could increase the redness of red- and white-colored fancy carp fingerling.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2000

In order to decolorize disperse dyes by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. To increase the removal efficiency of decolorization in the aqueous solutions, the optimal condition of decolorization by this strain was investigated, and continuous plant test was also developed. The optimal culture conditions of temperature and pH were found to be 4$0^{\circ}C$ and 8.5~9, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest(93%) among the nitrogen sources. The strain to be screened was excellent to adjust to pH, and it seems to be have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_4\cdot{7H}_2O$ and $KH_2PO_4$ were 0.1%(w/v) and 0.2%(w/v). The result of continuous plant process using wastewater was as following : $COD_{Mn}$ removal efficiency was over than 50%, and this strain was very excellent in decolorization-efficiency for the wastewater of Taegu dyeing complex.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.277-282
• /
• 2014

Two tert-butyl substituted phthalocyanines(Pcs), in metal-free and metallated forms, were synthesized and the fluorescence responses toward various nitro derivatives, including picric acid(PA), 2,4-dinitrotoluene(DNT), 1,4-dinitrobenzene(DNB), 4-nitrotoluene(NT), nitrobenzene(NB), 1,4-benzoquinone(BQ), and nitromethane(NM) were investigated. Among the various nitro derivatives, current Pc derivatives exhibited efficient and exclusive fluorescence quenching in the presence of picric acid, which was readily observed by a naked eye. Quenching efficiency was estimated by the Stern-Volmer relationship, in which quenching constant, KSV, was calculated to be in the range of $10^4M^{-1}$. It was also found out that the aggregational behaviors of these Pcs are heavily dependent on the nature of solvent systems, subsequently affecting the quenching efficiency.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.23-31
• /
• 2001

To improve the dyeability and colorfastness of cotton and silk fabric dyed with natural dye of safflower, cotton and silk fabrics were pre-treated with different mordants such as halliic-acid, alum, brine and tannic-acid. Also, to investigate the effect of finishing treatment of fabrics on dyeability, cotton was treated with chitosan and mercerized before dyeing. L, a, b, ΔE and colorfastness(light, Laundry, sweat) of each samples were measured and compared. Mordant treatment didn't improved significantly dyeability and colorfastness on cotton and silk. But, on cotton mercerization and chitosan treatment improved dyeability and colorfastness. To compare the efficiency of extracted dye and Powered dye, extracted red dye of safflower prepared as powder. Cotton and silk were dyed with dyeing solution which made with powdered dye according to different concentration. Efficiency of powdered dye was found out lower than extracted dye solution.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.179-186
• /
• 2011

For the application of Jeju scoria scattered around the island as a natural dye, cotton fabrics were dyed with the dye and their properties were measured including dyeability, colorfastness, antibacterial activity, deodorization efficiency, ultraviolet protection, and far-infrared emission. The dyed cotton fabrics were in yellowish red and optimal dyeing conditions were obtained with a colorant concentration of 25%(o.w.b) at a temperature of $80^{\circ}C$ for the dyeing time of 120 minutes. The ratings of colorfastness to light, rubbing, perspiration, and washing were 8, 5, 5, and 4~5 respectively. After 15 wash cycles, colorfastness remained as much as 4~5 rating. The cotton fabric dyed with Jeju scoria demonstrated excellent antimicrobial activity and deodorization efficiency of 99.9% and 93.9% respectively. Ultraviolet protection factor was 50+. Far-infrared emission rate and far-infrared emission intensity were 90% and 362(W/$m^2{\cdot}{\mu}m$) respectively. The Jeju scoria can be introduced as a new colorant for the natural dyeing of cotton.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.69-79
• /
• 2006

The washing characteristics of steam jet heating process have been compared with other washing processes, such as low temperature process(standard process, below $40^{\circ}C$) and high temperature process(boiling process, up to $95^{\circ}C$) with the standard soil fabric, EPMA 105. Steam jet heating process showed almost the same washing efficiency as high maximum temperature process for pig's blood and wine. This result can be explained with the higher surface temperature of washing materials in steam jet process compared with direct boiling process. In terms of the energy and water consumption, the steam jet washing process showed significant savings compared with direct boiling type washing process.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2000

This paper surveys the fabric weavability and machine efficiency in the various weaving looms such as Projectile, Rapiers, and Air-jet. Used projectile loom was Sulzer-PU, and FAST-R, THEMA-11E, and Picanol-GTX were used for Rapier looms, as the Air-Jet looms, Picanol PAT and OMNI types were used. Using these looms, 5 harness worsted satin fabrics were woven for surveying the fabric weavability and machine efficiency. Warp yam count of fabric is 1/40Nm, Sirofil, and filling is 1/30 Nm, worsted. End breaks of warp and filling directions for the various types of looms are measured and discussed with the mechanism of each loom. Warp and filling yam tensions are also measured and analysed with open width of shedding motion of each weaving machine. And various warp yam tensions with open width of shedding are measured and analysed according to the warp yam in various heald frame. These results fire also discussed with temples such as bar and ring. Warp yam tensions at the various positions on the fabric with various looms are measured and discussed with fabric mechanical properties such as tensile, bending, shear and surface.

• Korean Journal of Poultry Science
• /
• v.9 no.1
• /
• pp.17-33
• /
• 1982

The purpose of this experiment is to clarify the additional effect of antibiotics for the chicken breeding feed. This experiment was carried out with 6,560 individuals which were collected from four farms, Dugil, Hyubhoi, Sanggog and Kumsan. The duration of this experiment was 6 months from July to December in 1981. 1. Body weight and body gain. (1) The range of the body gain was 1.91-7.60% The most effective sections was T$_3$, and the effect was T$_2$, T$_4$, T$_1$, T$\sub$5/ in order. (2) The environmental sanitation of the Sanggog farm was not so good. In this farm the body gain was severely occurred in T$_3$ and T$_2$ sections. Mere gain obtained from T$\sub$5/ section. (3) The environmental sanitation was good in Dugil, Hyubhoi and Kumsan. A little body gain was occurred in these farms, but differences were shown according to the place or breeds. 2. Amount of feed intake feed conversion ratio. (1) Amount of feed intake was increased 0.13-3.19%, and feed conversion ratio was improved 1.68-4.62% compared with control. T$_3$ section showed high percent and T$_4$ T$_1$, T$\sub$5/, Is, C in order. (2) The keeping method of the chicken breed in Hyubhoi was floor brooding. From Hyubhoi and Sanggog farms, the efficiency was increased 9.4-9.8%. (3) From Dugil and Kumsan, the rate of improvement was low. 3. Mortality : Mortality was merely decreased in Sanggog and Kumsan farms which the sanitary and fowl caring conditions had been had, by additional antibiotics. But there was no worthy effect. 4. The ratio of carcass and the degree of skin coloration. The additional antibiotics in feed had no effect on the ratio of carcass but had the influence on the yellowish skin coloration. Skin coloring was good in T$\sub$7/ section and T$_1$, T$\sub$6/, T$_4$, C, T$_3$, T$\sub$5/, T$_2$ in order. 5. Economical efficiency (1) The addition of the antibiotics in feed increased 3.76-10.95% of gross earning. The highest earning was occurred in T$_4$ section and T$_3$, T$_1$, T$_2$, T$\sub$5/, C sections in order. (2) The earning rate was influenced by the antibiotic products. (3) In Dugil and Kumsan farms, there was no difference in earning, however, in Hyubhoi and Sanggog farms there was wide difference in earning. Conclusionally, the addition of antibiotics in chicken breeding feed is necessary. Especially in bad condition of environmental sanitation and floor brooding, the effect of additional antibiotics is clear. Selection of antibiotics from various kinds, maker's confidence and quality problems are important.