• 한국의류학회지
• /
• 제33권3호
• /
• pp.391-400
• /
• 2009

The purpose of this study is to investigate the efficacy of safflower yellow colorant as a natural dye for hair coloring. The dyeing properties of safflower yellow colorant on hair were explored to obtain optimum conditions. Also, the effect of mordant was studied in terms of dye uptake, colorfastness, and hair damage to better understand the characteristics of the colorant. Tensile strength measurement and SEM analysis were carried out for investigating hair damage to light exposure and washing. On the basis of obtained results considering possible hair damage, optimum dyeing conditions were set 100%(o.w.h.) colorant concentration, pH 5, $40^{\circ}C$, and 20min. Dye uptake was improved more effectively by repeated dyeing rather than by increasing concentration. Pre-mordanting method improved dye uptake slightly, irrespective of mordant type. The safflower yellow colorant produced Y colors on hair. Cu and Fe mordants improved washing and light fastness slightly. Better strength retention was obtained with the mordanted-dyed hair than the unmordanted-dyed hair after light irradiation for 40 hours and 10 repeated washing. The hair was more damaged by light exposure than by washing. It was concluded that the safflower yellow colorant can be used as a natural semi-permanent hair dye producing Y color without mordanting.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.51-51
• /
• 2011

Acetate 섬유는 고감성 제품의 대표적 핵심소재로서 실크와 같은 우아한 광택과 청량감을 주어 고가의 의류제품으로 사용되지만 편직 및 염색가공 공정이 까다롭고 비교적 저분자량의 분산염료로 염색되어 내열성, 염색견뢰도 및 물에 대한 형태안정성이 떨어진다. 특히, Acetate 편직물은 이태리나 일본 등 섬유선진국에서도 제조가 까다로운 기술적 난이도가 매우 높은 제품군이다. 반면 Tri-Acetate는 Acetate의 장점을 가지면서 내열성, 내세탁성, 원상회복력(resilience)등이 우수하여 기존 Acetate 시장의 고급제품 용도로의 전개가 가능할 뿐만 아니라 PET 등의 물성 및 형태가 다른 복수의 소재성분을 직물 사이에 공존시킴으로써 새로운 태, 기능, 외관, 광택의 부여가 가능하며 이를 활용한 차별화된 고부가가치 시장의 창출이 기대된다. Acetate와 Tri-Acetate 모두 셀룰로오스의 친수기가 아세틸화된 구조를 가지는 소수성 섬유로 분자구조가 치밀하여 분산염료로 염색된다. 그러나 일반적으로 Acetate 섬유의 경우 Acetate용 일반분산염료를 사용하여 저온상압염색을 하는 반면, Tri-Acetate의 경우 고온고압 분산염료를 사용하여 고온고압염색을 한다. PET와 Tri-Acetate 복합소재의 경우, 두 소재의 염색거동이 비슷하여 고온고압 분산염료로 염색이 가능하지만 T/P 복합소재에 상응하는 염색을 위해서는 복합소재를 구성하는 각각의 섬유소재에 적합한 염료의 선정 및 염색법의 개발이 필요하다. 본 연구에서는 Tri-Acetate 및 T/P 복합소재에 대한 염색최적조건을 규명하고자 염색온도별, 2종의 분산염료의 농도별 염색성, 염색시료의 인열강도 및 견뢰도를 측정하여 적정조건을 도출하였다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.202-209
• /
• 2021

Natural dyes are more expensive than synthetic dyes and the dyeing process, which is mainly immersion of dye, is complicated. For this reason, relatively small-scale production methods were predominant. However, awareness and interest in environmental sustainability is rising globally, and the use of synthetic dyes causes various environmental problems such as wastewater and CO₂ emission, so the consumption of natural dyes is increasing. In addition, interest in digital textile printing, an eco-friendly dyeing method that can produce products of various designs and uses less water, is growing. In this study, natural indigo dye (Indigofera tinctoria) was used as a raw material for Digital Textile Printing ink, and ¹⁴C (Biocarbon) present in it was measured to confirm whether it was derived from natural ingredients. The performance was confirmed by testing the pH, viscosity, electrical conductivity, surface tension, and particle size analysis of natural indigo ink. In addition, the performance of natural indigo DTP ink and printing fabric was evaluated by inspecting the change in color fastness and corresponding index substances before and after digital printing with natural indigo DTP ink on textiles. Through this, the possibility of commercialization of DTP ink and printing fabric using natural indigo was confirmed.

• 한국염색가공학회지
• /
• 제34권4호
• /
• pp.224-233
• /
• 2022

Recently, consumer tastes of various classes at home and abroad prefer comfortable, unadorned, and simple clothing, and the athleisure trend, which can be used freely in daily life as well as exercise, has expanded to overall clothing products. Existing materials used for athleisure are composite knitted fabrics using polyester yarn and PU yarn, which has problems due to a chronic lack of color fastness and contamination by dyes even when PU laminating is applied, making it difficult to apply various colors. There is a quality problem in which deformation of the product occurs due to lack of durability. In this study, CDP yarn(75de/72f) and PU yarn(40de) were selected to commercialize the circular knitting for athleisure using CDP yarn in order to solve the problems that occur in the dyeing and laminating process when using polyester materials. CDP yarns were used to knit into single(CP75-S) and double(CP75-D) knit and single knit were found to be suitable as athleisure fabrics. After pretreatment and treatment under various conditions, the stainability of CDP circular knitting was examined. After pretreatment and dyeing process under various conditions, the property of scouring and dyeability of CP75-S were evaluated.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.

• 보존과학회지
• /
• 제34권3호
• /
• pp.157-166
• /
• 2018

본 연구에서는 아교의 접착 특성 향상을 위해 가교제(Cross-linking Agent)를 첨가하는 방법으로 젤라틴 결합력을 증대하였다. 제니핀 첨가 아교는 물성 측정, 구조 분석, 색잔류도, 용출도, 파단강도를 측정하였으며, 수분과 자외선에 대한 내수성과 내광성을 비교하였다. 연구 결과 겔강도와 점도는 제니핀 첨가량에 따라 증가하였다. 구조분석 결과, 젤라틴에서는 구조적으로 안정된 콜라겐의 3중 구조의 흡수 피크가 관찰되었다. 색잔류도 결과, 명도가 낮아지기 때문에 피막이 관찰되는 것으로 판단된다. 용출량은 $50^{\circ}C$ 증류수에서 제니핀 첨가량이 증가할수록 용출된 아교 양이 증가하였고 파단강도는 제니핀 첨가량에 따라 증가하였다. 내수성과 내광성은 제니핀 첨가에 따른 열화 전 후 양상이 나타나지 않았다. 본 연구 결과를 바탕으로 제니핀 첨가 아교의 접착 특성을 확인할 수 있었으며 아교에 적용 가능한 실험 방법을 고찰하였다. 제니핀을 첨가한 후에도 아교 고유의 특성인 유연성, 재용해성, 접착력, 경화속도가 사라지지 않고 향상되기 때문에 균질한 아교가 확보된다면 문화재 보존 및 아교 제작에 적용이 가능할 것으로 기대한다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• 한국의류학회지
• /
• 제32권6호
• /
• pp.882-889
• /
• 2008

국내에서 자라는 지의류의 한 종류인 Parmotrema austrosinence를 채취하여 염액을 제조하고, 제조된 염액을 사용하여 견직물, 나일론직물과 면직물을 염색하였다. Parmotrema austrosinence를 암모니아수에 넣고 발효시켜 얻은 염액을 사용하여 pH를 4, 7, 10으로, 염색온도를 $30^{\circ}C$, 50^{\circ}C$, $80^{\circ}C$로 각각 조절한 후 염색을 하였다. 면직물은 견직물과 나일론직물에 비해 염색성이 낮게 나타났다. 면직물의 염색성 향상을 위해 키토산 액으로 처리하고 염색성과 염색견뢰도의 변화를 검토하였다. 염색된 시료들의 염색성은 K/S값, ${\Delta}E$와 Munsell값을 측정하여 평가하였다. 염색된 시료들의 K/S값은 견직물의 경우에는 520nm에서, 나일론직물과 면직물은 480nm에서 최대 흡광파장을 나타냈다. 견직물 염색포의 K/S값은 $4.6{\sim}9.3$으로 $1.0{\sim}2.7$인 나일론직물이나 $0.8{\sim}1.6$인 면직물에 비해 매우 높게 나타나 견직물이 Parmotrema austrosinence 염액에 대해 우수한 염색성을 가짐을 확인하였다. 염색온도가 높아질수록 먼셀 색상값이 red나 yellow red에서 yellow쪽으로 이동하는 색상변화가 나타났다. 견직물의 경우, 염색온도가 $50^{\circ}C$와 $80^{\circ}C$일 때의 염색성이 비슷하였으며, 다른 직물의 경우에는 염색온도 상승에 따라 K/S값도 높아졌다. 따라서 지의류를 사용한 적정 염색온도는 견직물의 경우 $50^{\circ}C$, 다른 직물의 경우 $80^{\circ}C$임을 확인하였다. 염색된 시료의 먼셀 색상은 견직물에서는 R(red) 영역에서, 나일론 직물에서는 YR(yellow red)-R 영역에서, 면직물은 YR 영역으로 나타났다. 면직물과 나일론직물은 중성 또는 산성염액에서 염색이 잘 되었고, 견직물의 경우는 중성 염액에서의 염색성이 가장 우수하였다. 염색성이 낮게 나타난 면직물은 키토산 가공에 의해 염색성과 염색견뢰도를 향상시킬 수 있음을 확인하였다 염색된 시료들의 일광견뢰도와 세탁견뢰도는 대체로 낮게 나타났으나 드라이크리닝 견뢰도는 4-5급 또는 5급으로 모두 우수하였다.