• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2010

Sodium sulfate is commonly added in reactive dyebath in order to increase substantivity of the reactive dye to cellulose fiber by reducing repulsion between anionic dye and fiber. While sodium sulfate is mostly used in solid form, it is inconvenient to dissolve a large amount of powder sodium sulfate. Furthermore, if there is undissolved salt in dyebath it might cause unlevel dyeing. In this study, sodium sulfate in liquid or solid form was used in dyeing of cellulose fabric with reactive dyes of three primary color and the effect of type or amount of sodium sulfate on dyeing and fastness properties was investigated. When the amount of sodium sulfate rose to 30-50 g/l, K/S value of the dyed fabric markedly increased; further rise in sodium sulfate concentration resulted in slow increase in K/S value. For light color, optimum amount was about 30 g/l in solid form and 50-100 g/l in liquid form while, for medium to deep color, it was 50 g/l and 100-150 g/l in solid and liquid form, respectively. When using each optimum amount of salt in solid or liquid form for medium color, shape of dyeing curve as well as exhaustion was similar to each other. On the whole, similar color fastness results were obtained regardless of type or amount of sodium sulfate.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.1
• /
• pp.79-85
• /
• 1987

The purpose of this study was to help the consumer about the care of nonwoven fabrics by investigation of the properties such as launderability. shrinkage, color fastness and strenth. Materials used were two types, soft and stiff, of commercial nonwoven fabrics. Deter-gents used were neutral detergents, synthetic detergents and dry cleaning solutions(perch-toro-ethylene) The results of this study were summerized as follows; 1. Laundering of nonwoven fabrics in low temperature is more ideal as morphological changes by laundering in high temperature were more prominent than that in low temperature. 2. Ironing of nonwoven fabrics wants more attention on environmental temperature as the rate of shrinkage in high temperature was higher than that in low temperature. Neutral detergents are more desirable as the rate of shrinkage of nonwoven fabrics by laundering with synthetic detergents was more prominent than that with neutral deter-gents. The rate of shringkage of nonwoven fabrics was not affected by dry cleanining. 3. Special care is wanted in order to prevent color transfer from non woven fabrics to polyester or wool during dry cleaning or laundering as the color fastness test show that color changes of nonwoven fabrics were not affected, but that color stain was increased on polyester or wool. 4. The strength was affected by composition of fibers and types of nonwoven fabrics, soft or stiff.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.290-296
• /
• 2014

In order to produce black disperse dye which has high heat resistance and depth color for polyester(PET), an orange disperse dye was designed and synthesized with pyridine based derivatives to get high heat resistance. Disperse blue dye adopts heterocycles structure for high molar extinction coefficient and long wavelength absorption. Synthesized disperse dye is micronized to an particle size of $0.7{\mu}m$. The mixing condition for black color using commercial disperse violet 93 is blue dye 30%, red dye 21%, and orange dye 21%, respectively. Dyed PET fabric with synthesized dye has quiet good color fastness to sublimation(grade 3-4) and has excellent rubbing, washing and light fastness grade 4-5.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.19-26
• /
• 2020

The previous study reported that the quaternary copolymer of MMA, BA, MAA, and NEA was expected to be a good monomer composition for a binder polymer with good rubbing fastness for digital textile printing(DTP) pigment ink. However, the rubbing fastness of the dyed fabric with the quaternary copolymer binder containing pigment ink is not enough to be commercially used. Therefore, this study aims to optimize MMA:BA:MAA:NEA composition for improved rubbing fastness. And the binder polymer with various MMA:BA:MAA:NEA compositions were synthesized using miniemulsion polymerization. The particle size, viscosity, molecular weight, and Tg of the synthesized binder were evaluated. And the color strength and rubbing fastness of the black pigment ink dyed cotton fabrics with the prepared binders were also evaluated. Then, the stiffness of undyed and dyed cotton fabrics were evaluated to investigate the changes in touch as the binder structure changes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.115-124
• /
• 2006

Natural dyes are environmentally and human compatible. But they are not various or not fast in color. The mixed dyeing have been attempted to solve these disadventages of natural dyes. The persimmon juice dyed fabrics have brown-color and good hygienic properities however low color fastness. The onion dyeing show similar brown-color and have good color fastness caused by querectin existed in onion outer skins. Mixed dyeing was carryied out on silk fabrics using persimmion juice and onion outer skin extract in this study. The mixing method were persimmon juice dyeing and then onion dyeing(P-O), onion dyeing and then persimmon juice dyeing(O-P) and dyeing in the mixture of persimmon juice and onion outer skin extract simultaneously(P+O). The mordants were none-mordent, gallic acid after-treatment and alum after-treatment. Several persimmon juice dyed fabrics were irradiated for 2 hours before onion dyeing(PU-O). The color values of dyed silk fabrics were as follows. The persimmon juice dyed silk fabric developed to yellow-red color after 2 hours of uv irradiation. Onion dyed fabrics show similar yellow-red color after dyeing without uv irradiation. The effect of alum after-treatment on color difference were highest in onion dyeing. The dyeabilities of both P-O and O-P were higher than persimmom juice dyeing and onion dyeing. The dyeabilities of P+O was lower than persimmom juice dyeing and onion dyeing. The value of color difference of alum-treated fabric was the highest. The color difference of P-O and O-P caused from 2 to 4 hours of uv-irradiation were lower than those of persimmon juice dyed fabrics. Onion skin extract could prevent the color-change of persimmon juice dyed fabrics in mixed dyeing. The color difference of PU-O was higher than the P-O.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.51-56
• /
• 1995

Cotton fabric was treated with acrylonitrile in t-butyl alcohol and then aminized by reduction of the resultant cyanoethyl cellulose with LiAIH4, under various temperatures and times. Aminized cotton fabric toras dyed with acid and reactive dye. Dyeability as to temperatures, pH, and color fastness were compared to the amiRe group content of treated cotton fabrics. The results of this study were as follow: 1. D.S of cyanoethyl cellulose has been increased by increasing treating temperatures and times. Maximum D.S of cyanoethyl cellulose was 1.45. By SEM and the tensile strength, the damage of the treated cotton was not observed. 2. Since aminized cotton has greater affinity on acid dye than untreated cotton, dyeability increased with the increase of amino group content, and the lower pH, $60^{\circ}C$. 3. Since amino group in aminized cotton changes surface charge of cotton, dyeability for reactive dye increased by increasing the amino group content. Optimum dyeability was obtained at pH 5-7, $40^{\circ}C$. And dyeability of the amine treated cotton increased with the NaCl conc. 4. Color fastness to washing & light of the amine treated cotton was very low except for the wash fastness of the reactive dye.

• Textile Coloration and Finishing
• /
• v.26 no.2
• /
• pp.131-142
• /
• 2014

This paper was focused on investigating synthetic fabrics treated with persimmon juice by padding mangle repeatedly. The merit of dyeing by pad-dry method was easier color reproduction than dyeing by immersion method. With increasing number of padding, the dyed nylon fabrics showed deeper yellow-red colors, but dyed polyester fabrics had no uniform tendency. The dyed synthetic fabrics had a 3rd grade of ligtht, 4~5th grade of perspiration fastness, 5th grade of stain washing fastness, and 3~5th grade of rubbing fastness. As the number of padding and exposed time to sunlight or UV light increase, the value of K/S and ${\Delta}E$ increased and the colors become much deeper gradually. The color development had completed about 70 hours exposure to UV light. As the padding time of dyeing with persimmon juice increased, stiffness and water repellent property were enhanced, respectively. Also, the dyed synthetic fabrics had good antibacterial activity and deodorization.

• Textile Coloration and Finishing
• /
• v.23 no.1
• /
• pp.11-20
• /
• 2011

UV-induced surface copolymerization has been widely applied as a simple, useful and versatile approach to improve the surface properties of textiles. C.I. Reactive Black 5 and acrylic acid (AA) were continuously grafted onto cotton by UV irradiation. The photografting may occur by the copolymerization of AA with the vinylsulfone reactive dye which photochemically converted from the bissulfatoethylsulfone reactive group. The graft yield and color yield were influenced by UV energy, the dye and photoinitiator concentrations, a mole ratio of AA to dye, and pH. The coloration of cotton fabrics having a K/S of 7.0 can be obtained under a UV irradiation energy of 15$J/cm^2$ by the photografting of an aqueous alkaline formulation of 6% dye concentration containing 3% photoinitiator concentration on the weight of monomers, and a 3:1 mole ratio addition of AA to the dye. Furthermore, the photochemically dyed cotton fabrics showed comparable washing (staining) and rubbing fastness to conventional reactive dyeing method except shade change in the wash fastness and light fastness.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.63-71
• /
• 2022

This paper aims to compare and verify the antibacterial effects of cotton fabrics naturally dyed with extracts of Ulmus davidiana var. japonica Nakai, Caesalpinia sappan, Saururus chinensis, and Artemisia princeps against antibiotic-resistant strains of bacteria. After natural dyeing of the test fabric, Al, Cu, Fe mordants were used. The color fastness against washing, rubbing, and perspiration of the cotton fabrics dyed with the 4 types of extracts were mostly excellent. However, the color fastness against light showed poor results for all four types. As for the antibacterial test method, MRSA (ATCC 33591) was applied to the cotton fabrics dyed with the four kinds of extracts and cultured for 24 hours. After that, the bacteria that proliferated on the fabrics were collected and spread on a solid medium. The bacteria were measured to find out the bacteriostatic reduction rate for the antibiotic-resistant strains. As a result of the analysis, all four extracts showed a high bacteriostatic reduction rate of more than 99% when the copper mordant was used. Even with the lack of a mordant, the bacteriostatic reduction rate was high, at 99.9% for Caesalpinia sappan and 94.6% for Saururus chinensis.