• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.6
• /
• pp.1348-1359
• /
• 2013

Kwamaegi is made from the flesh of Pacific saury, Cololabis Saira, which is traditional Korean seafood. It is well-recognized as a valuable health food containing EPA(eicosapentaenoic acid) and DHA(docosahexaenoic acid) to be known ${\omega}$-3 fatty acid. This study was conducted to obtain basic data which can be applied to process of canned Kwamaegi using tomato paste sauce. Commercial Kwamaegi was cut into $2{\times}3cm$ lengths, filled 90 g into can (301-3), added with 60 g water and then precooked for 10 min. at $100^{\circ}C$. After precooking, water was drained. The precooked Kwamaegi was packed into the can, and added with 60 g of tomato paste sauce(tomato paste 42%, gum guar 1.0%, salt 2.0%, starch syrup 2.0%, cooking wine 1%, water 52%). The cans were seamed using a vacuum seamer, and then sterilized for various Fo values (Fo 8~12 min.) in a steam system retort at $121^{\circ}C$. pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned Kwamaegi using tomato paste sauce produced at various sterilization condition(Fo 8~12 min.) were measured. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 8 min. was the most desirable because this condition is the most economical and tasty.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.263-275
• /
• 2012

Jurassic Daebo biotite granites, known as one of the main stone resources in the country, are widely and away distributed in the Pocheon and Yangju areas of the mid Gyeonggi massif. The objects of the study are mainly to reveal the unique characteristics of grain size, rock color, mineral composition, physical property and fracture system from the above biotite granites. Biotite granites from the Pocheon area (PG) and Yangju area (YG) are represented by coarse-grained and light gray, and medium to coarse-grained and grayish to light gray, respectively. In modes, main minerals of Qz+Af+Pl (quartz+alkali feldspar+plagioclase) are more increased in the PG, and accessories of biotite are more increased in the YG, which differences can cause the PG more bright light gray than the YG. Specific gravity (SG) shows somewhat more increasing in the YG than the PG. These differences can be caused by more increasing in biotite contents of higher specific gravity compared to the major minerals in the former than the latter. Absorption ratio (AR) and porosity (PR) of the PG and YG show the same values of 0.33 % and 0.86 %, respectively. In the correlations, PR vs SG and AR vs PR show gradually negative and distinctly positive trends, respectively. Compressive strength (CS) and tensile strength (TS) show increasing in the PG (CS: 1,775 $kg/cm^2$, TS: 87 $kg/cm^2$) than the YG (CS: 1,647 $kg/cm^2$, TS: 79 $kg/cm^2$). These strength characteristics could be attributed to the inherent rock textures of them. Abrasive hardness (AH) also shows a little increasing in PG, which can be caused by increase in quartz contents having higher hardness than the other major minerals. Orientations of fracture sets from the PG and YG were compared with those of vertical rift and grain planes in Mesozoic granites of the country. From the overlapped diagram, the distribution pattern between fracture sets and above vertical planes suggests that microcrack systems developed in Mesozoic granites in Korea occur also in the Daebo biotite granite bodies of the mid Gyeonggi massif. From the relation diagram showing the characteristics of fracture patterns for the above two area, PG and YG may have more potentiality for dimension and non-dimension stone resources, respectively.

• Food Science and Preservation
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2009

We sought to improve the methods for washing fresh raw ginseng. The quality of ginseng surface-washed by different methods was evaluated during storage at 10C and $20^{\circ}C$. The raw ginseng surface-washing method was a full-cone spray-type procedure using water and air. The water for decontamination had an electrolysis value of 80 ppm, also known as electrolysis water $2^{\circ}C$ water and water containing 5 ppm chlorine dioxide, were also used for decontamination. The Hunter color (${\Delta}E$) of ginseng washed with water withan electrolysis value of 80 ppm, or water with 5 ppm chlorine dioxide, was greater than that seen after other washing methods were used. The weight loss after washing with 5 ppm chlorine dioxide water was similar to that seen after washing with $2^{\circ}C$ water or 80 ppm electrolysis water. Reductions in total microorganism levels, and counts of yeasts and molds, assayed 10 days after washing with 5 ppm chlorine dioxide water were greater than seen after use of other sterilization methods. Quality maintenance on storage, at both 10C and 20C, after washing with 80 ppm electrolysis water, was better than that noted after other sterilization methods. The moisture content of washed ginseng was similar under all storage conditions tested.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.589-597
• /
• 2008

The purpose of this study is to arrange for the systematic execution of safety control in children's foods through nutrition and hygiene standard suggestions and guidelines for quality certification system in children's preferable food. Aiming to achieve this objective, the study researched the present status of children’s preferable food sold near elementary schools, elicited the hazards and problems of those foods and selected nutritional and hygienic hazard components in those foods. To suggest the standards and guidelines for quality certification in children's preferable food, the study referred to sundry records, surveyed the practical cases of relevant policies and standards at home and abroad. We studied the standard of nutrition for the quality certification in those foods for sugar, fat, sodium, and additives (tar color: red No. 2 in a ban on use, caffeine), microorganism (aflatoxin $B_1$ (${\mu}g$/kg) and pathogenic bacteria (Staphylococcus aureus, Bacillus cereus, Salmonella spp.), which are the nutrients that may hamper health when taken in a large amount, and the standard for a diet restricted to under 200 kcal per one serving size. Results of distribution of processed foods (242 samples) by nutrition standards were as follows. In case of all ‘low’ level in total sugar, total fat and sodium, 0.4% of total samples was possible to be certified, In case of all ‘medium’ level in total sugar, total fat and sodium, maximumly 22.3% of total samples was possible to be certified. In case of all medium level in nutrients and $\leq$200 kcal/serving, 17.8% of total samples was possible to be certified. Certified food types was milk products and beverages.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1515-1520
• /
• 2012

This study evaluate the quality characteristics and antioxidative properties of acorn starch mook containing spirulina (0%, 0.5%, 1%, 1.5%) and soy protein (3%). The pH of acorn starch mook containing the spirulina and soy protein decreased with increasing amount of spirulina decrease in pH means an increase in acidity. In addition, the moisture content was 87%. The lightness of acorn starch mook containing spirulina and soy protein decreased with increasing amount of spirulina and soy protein. The L and a values of the Hunter color system were decreased significantly increasing spirulina content, and the b value increased. In contrast, with increasing spirulina and soy protein content, the L and a increased significantly and the b value. Texture analysis revealed higher hardness and springiness of acorn starch mook containing spirulina than the control. The total phenol content was highest in the acorn starch mook containing 1.5% spirulina and 3% soy protein. The antioxidant activities of the acorn starch mook containing spirulina and soy protein increased with increasing amount of spirulina and soy protein. The $IC_{50}$ value of 1.5% spirulina and 3% soy protein was 166.2 mg/mL for DPPH. The results of the sensory test were best in the acorn starch mook containing 1% spirulina.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1402-1408
• /
• 2012

Mulberry pomace, a by-product obtained from mulberry juice, has not been utilized as food. In this study, antioxidant activities, proximate composition and physiochemical characteristics of mulberry pomace were evaluated and compared with those of mulberry fruit or mulberry concentrate. Mulberry fruit was pressed and filtered. The filtrate and residue were used as mulberry juice and mulberry pomace, respectively. Mulberry juice was evaporated, after which a concentrate ($24.7^{\circ}Brix$) was obtained. Moisture contents of mulberry concentrate, freeze-dried mulberry, and pomace were 68.7%, 6.03%, and 7.32%, respectively. Reducing sugar contents were 45.7% in freeze-dried mulberry, 24.5% in pomace, and 30.9% in mulberry concentrate. The pH and acidity of the three samples ranged from 5.80~5.92 and, 0.035~0.080%, respectively. Carbohydrate and crude ash contents were the highest in mulberry fruit, whereas crude protein, fat, and fiber contents were the highest in pomace. Redness of the Hunter color system was 4.7 in mulberry and 4.3 in pomace. Total phenolic content was the highest in mulberry fruit, whereas total flavonoid content was the highest in pomace. Antioxidant activities (DPPH, hydroxyl, and ABTS radical scavenging activities) were enhanced in the order of mulberry fruit> pomace> mulberry concentrate. Especially, antioxidant activities, such as DPPH and hydroxyl radical scavenging activities, of mulberry pomace were similar with those of mulberry fruit. Based on these results, freeze-dried mulberry pomace may be considered as a functional as well as an additive material for food processing.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.96-105
• /
• 2007

A pair of maroon clownfishes with an indonesian native, reared in recirculation culture system to develope its aquaculture techniques. Courtship, spawning behavior, egg developments and rearing of the maroon clownfish larvae were documented. The larval development were described with illustrative figures. The spawning was occurred 8 times between Feburary and August 2004. The gravid female spawned during 15:00-20:00. The male mainly took care of the eggs supplying oxygen by water currents using their pectoral fins, anal fin and mouth. The fertilized eggs were separative-adhesive and oval in shape, and $1.99{\pm}0.03\;mm$ in longer diameter and $0.88{\pm}0.03\;mm$ in shorter diameter. The fertilized eggs were in deep-orange color. Cleavage occurred in 30 minutes after fertilization, and the egg reached 2 cells stage in 1 hour 10 minutes after fertilization at $27.0^{\circ}{\pm}0.5^{\circ}C$. The embryo was formed in 23 hours 40 minutes after fertilization. Hatching began in between $120{\pm}2$ hours and $150{\pm}12$ hours after fertilization at $27.0^{\circ}C$ in the incubator. Total length (TL) of the newly hatched larvae was 3.22 mm with mouth and anus opened. Ten days after hatching, mean TL of the larvae were 6.21 mm with 28 dorsal fin rays, 17 anal fin rays and 28 caudal fin rays. Nineteen days after hatching, mean TL of the larvae were 9.34 mm. At this stage the larva had three white bands on the body, and they began to feed on commercial diet.

• Korean Journal of Poultry Science
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2017

This study examined the effects of adding dried blood mixed with Macsumsuk to the feed of broiler chickens. The blood had been dried at $200^{\circ}C$ in an ultra-high-temperature injection system and mixed in a 70:30 proportion of blood meal to Macsumsuk. The experiment consisted of four treatment groups of 150 chickens each. The control group received common broiler feed only, while treatment groups T1, T2, and T3 received feed supplemented with 0.5, 1.0, and 3.0% of the blood meal/Macsumsuk mixture, respectively. The diets were fed for a total of 35 days. Compared with the controls, body weight gain was improved in groups T1 (1,621 g), T2 (1,749 g), and T3 (1,739 g) (1,621-1,749 g vs. 1,448.5 g, respectively) and feed efficiency increased (p<0.01). The carcass rate in group T3 was higher by 83.26% than that in the controls (75.96 %) (p<0.01). The water holding capacity (WHC) increased in groups T1 and T2 (62.27 and 63.80% respectively) compared with controls (p<0.01). The intestine length was longer in groups T1 and T2 (53.98-55.48) than in controls (45.81) (p<0.01). Adding 0.5-1.0% of the dried blood meal Macsumsuk supplement resulted in a significant reduction in the cholesterol content (39.28~47.34 mg/100 g) compared with the controls (50.44 mg/100 g) (p<0.001); furthermore, the proportions of fatty acids including oleic (C18:1n9), ${\gamma}-linoleic$ (C18:3n6), eicosenoic (C20:1n9), and arachidonic (C20:4n6) acids were significantly increased (p<0.01). Compared with controls, the proportion of unsaturated fatty acids (UFA), mono-unsaturated fatty acids (MUFA), and proportion of UFA / SFA in group T1 was (68.66 vs. 69.35%, 51.22 vs 52.00%, and 2.19 vs. 2.26%, respectively) (p<0.05). However, the amino acid content of cystine and methionine of the treatment group (0.43~0.57%) was significantly higher than that of controls (0.38~0.46%) (p<0.05). Overall, supplementing the feed with 0.5-1.0% of the mixture of blood meal Macsumsuk improved productivity by increasing weight gain and feed efficiency, improved meat quality by increasing the water-holding capacity and levels of unsaturated fatty acids, and improved meat color.

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.568-576
• /
• 2000

Physicochemical and sensory properties of turnip kimchi prepared with traditional two cultivars were examined during fermentation at 0$\^{C}$ Greater decrease in pH and reducing sugar content, and higher increase of acidity' was observed in green-colored turnip kimchi than red-colored one. Lactobacilli number of green one was greater than that of red one. Antocyanin content increased upto day 45-50 and then decreased, the anthocyanin content of red one was higher than that of green one. The Hunter color L and a values increased gradually upto day 30 and then decreased, and the a value of green one was lower than that of red one. The hardness, fracturability and chewiness of turnip, determined by texture analyser, decreased during fermentation, and the values of textural parameters were smaller than those of red one. Sensory evaluation showed that the scores of 'sour odor', 'sour taste, 'sweet taste', 'savory taste, and carbonate taste' of green one were higher than those of red one, but the scores of 'hardness', 'fracturability' and 'chewiness' were lower than those of red one. Meanwhile there were no difference in 'juiciness'. Score of 'over-all acceptability' of green one was the highest with 8.8-8.9 on day 30, 40 and 45, but the score of red one was the highest with 8.5-9.1 at day 40 and 45. On the 70th day, this score of green one decreased to 2.2, but the red one maintained 6.3 on the 70th day of fermentation.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.