• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.35-41
• /
• 2006

This study was conducted to establish the post-harvest management system in rice. Harvested hulled rice was gathered into large-scale bag and combine bag, in which the rice quality and the influence on quality change were investigated on various storage periods and moisture contents. Moisture content of hulled rice ranged from 23.7% to 28.8% on different harvest times, which grew lower as harvesting time was delayed. When desiccation was retarded hulled rice in large scale bag was changed in color and emitted an of offensive odor in 3 days and that in combine bag showed similar symptom in 4 days. Inner temperature in large scale bag was changed a lot when the storage period was prolonged and also the moisture content was higher while that in combine bag increased regularly corresponding to the moisture content at the time of harvest. Moisture content of hulled rice stored in large-scale bag increased 2 days after harvest and the more moisture content showed the more increased tendency, while in the case of combine bag the moisture content was not changed much whether the hulled rice contained low or high moisture content in harvesting. As desiccation was delayed fatty acid increased much more in large-scale bag than in combine bag even though protein and amylose contentwere not changed. As desiccation was delayed more and hulled rice contained moisture more in harvesting head rice ratio of brown rice decreased and green-kerneled rice and damaged grain ratio increased and quality of milled rice also became deteriorated. As a result, desiccation day to minimize the deterioration of rice quality was estimated 1-2 days in large scale bag and 2-3 days in combine bag after harvesting.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.359-365
• /
• 2013

Chrysanthemum is one of the most popular ornamental plants worldwide. Recently, lots of new and novel chrysanthemum varieties have been developed using mutagenesis. However, there was no study for comparison of tissue culture condition among the mutant varieties derived from one original variety, until now. This study was conducted to compare the efficient regeneration condition of the two chrysanthemum mutant varieties, 'ARTI-purple' and 'ARTI-queen'. Two different flower parts (disk and ray florets) at the unopened and early blooming stages were used for comparison of regeneration condition on MS medium supplemented with combinations of three growth regulators (BA, NAA, and IAA). The highest regeneration rate was identified on the NAA and BA combination when the disk florets at unopened blooming stage are used. The best optimum combinations of growth regulators were identified as NAA $1.0mg{\cdot}L^{-1}$ and BA $0.5mg{\cdot}L^{-1}$ at 'ARTI-purple', which displayed 47.9% regeneration. However, regeneration of 'ARTI-queen' was the highest as 25.6% at NAA $2.0mg{\cdot}L^{-1}$ and BA $1.0mg{\cdot}L^{-1}$. There results indicate that there is a difference for the optimum regeneration condition between the mutant varieties derived from one original variety. These results will be useful for construction of efficient regeneration system of diverse chrysanthemum mutants developed by mutation breeding.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.244-252
• /
• 2005

This study was performed far development of new analytical method of beet red in foods. In this study, analysis of beet red in foods has been carried out by detection of betanine and isobetanine, the main color component of beet red as indicator compounds. The qualitative analysis technique consisted of clean-up of the colors with a $C_{18}$ cartridge, separation of the colors by cellulose TLC plate using acetone:3-methyl-1-butanol:distilled water (7:7:6) as a solvent system. Also, the quantitative analysis was performed using X-terra RP at wavelength 538 nm and $0.1\%$ phosphoric acid : methanol (90:10) as a solvent. The quantitative results of beet .ed were as follows:900.22$\∼$27701.60 $\mu$g/g for 60 item in nutrient supplement food, $21.95\∼713.40{\mu}g/g$ for 30 items and N.D. for 18 items in cindy, and $155.85{\∼}505.37{\mu}g/g$ for 12 items in ice creams, $43.52\∼64.75{\mu}g/g$ for 18 items and N.D. for 54 item in sauce, N.D. for 12 items in retort food.

• Journal of the Korean Society of Costume
• /
• v.26
• /
• pp.175-206
• /
• 1995

The costume culture of China is as old and varied as her long history. As China is a multiracial nation and consists of fifty-six min-ority races including Han race, there are not only fifty-six different costumes in China but each races' costume habit is very different. Therefore, Chinese penninsula can be considered an enor-mous exhibition center of the costumes. This study undertook on the assumption that the costumes' mainstream of Korea and east-northern Asia as well as that of China could be examined by investigating the minority races' costumes in the east-and west-northern areas of China. The process of evolution of the costume of a particular people, country or area is subject not only to constraints related to geography such as climate, topography or local products but is also affected by numorous environmental influences including cultural, economic, social and even pol-itical ones in terms of the selection of material, styling, color and standard of tailoring. In other words, things like philosophy of life, religious be-lief, aesthetic outlook, moral code, class system, degree of affluence, and cultural exchange will all be reflected directly or indirectly by features of a people's or country's style costume. Of course, there are several factors affecting to the style of costume of the minority people in China. However, the only three factors-geo-graphical and environmental, production method, and religious belef-will be touched in this study. First of all, the geograghical and eenviron-mental factor would be the decisive one because the costume should be designed to overcome the constraints of climate and geographical environ-ments. Accordingly, each race has an unique style of costume. The costume of the minority races in the northern parts are loose and wide, and made of warm furs. For instance, Mongolian robe has the quality of anti-wind, anti-cold and warmness, and the width of a sleeve is narrow and long. Secondly, the costume style can be said to be limited by the production pattern, when the geo-graphical environment was affected to decide the costume style, the production pattern was together affected to it . In case of Mongolian robe, they should satisfy the dual condition as the practical function. One is the condition that they should be fitted to the climate, and the other is the condition that they should be suit-able to the nomadic life. Mongolian robes are suitable to the nomadic peoples because they are designed for not only overcoming the cold wind and weather but being used as the bedquit at night. The costumes of Hoche people was made of the skin of the fish and wild animals because of their main means of living being fishing and hunting. Accordingly, their costumes are dur-able, warm and water-proof. Finally, the style of the costume is affected by the religious belief. In other words, the pattern in fashion is closely related with the religious be-lief or ancestor worship and nature worship. Ac-cordingly, the symbols of these worship are often emerged in the decoration of the costume. The design of costume of the people in the northern areas of China is very simple. It is related with their monotheism. On the other hand, the costumes of twen쇼 minority races in the east-northern parts of China can be devided into three racial groups such as the long robes of Man people and Mongols, Tunics of the peoples in the west-northern areas, and the pants and jackets of Hoche people. The minorority races all has not only the unique costume habit but their costumes are also related with their living style and production means.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.113-119
• /
• 2010

Software for GafChromic EBT2 film dosimetry was developed in this study. The software provides film calibration functions based on color channels, which are categorized depending on the colors red, green, blue, and gray. Evaluations of the correction effects for light scattering of a flat-bed scanner and thickness differences of the active layer are available. Dosimetric results from EBT2 films can be compared with those from the treatment planning system ECLIPSE or the two-dimensional ionization chamber array MatriXX. Dose verification using EBT2 films is implemented by carrying out the following procedures: file import, noise filtering, background correction and active layer correction, dose calculation, and evaluation. The relative and absolute background corrections are selectively applied. The calibration results and fitting equation for the sensitometric curve are exported to files. After two different types of dose matrixes are aligned through the interpolation of spatial pixel spacing, interactive translation, and rotation, profiles and isodose curves are compared. In addition, the gamma index and gamma histogram are analyzed according to the determined criteria of distance-to-agreement and dose difference. The performance evaluations were achieved by dose verification in the $60^{\circ}$-enhanced dynamic wedged field and intensity-modulated (IM) beams for prostate cancer. All pass ratios for the two types of tests showed more than 99% in the evaluation, and a gamma histogram with 3 mm and 3% criteria was used. The software was developed for use in routine periodic quality assurance and complex IM beam verification. It can also be used as a dedicated radiochromic film software tool for analyzing dose distribution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.3
• /
• pp.173-179
• /
• 1989

Characterization and classification of the potential acid sulfate soils found on flood-plains in Yeongnam area were summarized as follows: 1. The "Potential acid sulfate soil" layer(s) were appeared in the around 2-4m substrata of soil profiles and characterized by the fine texture, high reduction and physical unripened soft mud deposits or having higher contents of organic matter with dark color. 2. The contents of total sulfur (T-S) in those soils were ranged around 0.45-0.9% and the materials exhibited a strong acidity upon the oxidation with $H_2O_2$. Although the T-S contents was low as much as 0.15%, the sulfidic materials were also acidified strongly by the oxidation with $H_2O_2$ in the condition of lower content of carbonates. As defined in Soil Taxonomy of USDA, most of the sulfidic materials contained less than 3 times carbonate ($CaCO_3$ equivalent wt. %), but there were some which abundant in shell fragments, contained more than 3 times carbonate by weight percentage and that not much acidified by the oxidation with $H_2O_2$. 3. The contents of T-S correlated negatively with the pH oxidized by $H_2O_2$ and with the fizzing time (minutes) due to addition of $H_2O_2$. 4. The potential acid sulfate soils could be defined as soil materials that had sulfidic layer(s) more than 20cm thick within 4m of the soil profile and contained more than 0.15% of T-S with less than 3 times carbonate ($CaCO_3$ equiv. %). A tentative interpretative soil classification system was proposed, i.e., "Weak potential acid sulfate (T-S, 0.15-0.5%)", "Moderate potential acid sulfate (T-S, 0.5-0.75%)", and "Strong potential acid sulfate (T-S, more than 0.75%)". Finally, it was proposed that the "Detailed soil survey with high intensity" should be carried out in the areas of agricultural engineering works such as arableland readjustment works, in advance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.269-276
• /
• 2017

In this study, a test was conducted to examine the effects of micro-needle therapy (MTS) and cosmetics containing spirulina on improving the skin tone, skin hydration, hyper-pigmentation, and fine lines of middle-aged women in their 40s and 50s and to propose an effective skin care method. The subjects were divided into a control group of eight people who used serum and cream mask that does not contain MTS and spirulina, and an experimental group who used serum and cream containing MTS and spirulina. The test was conducted with six 30-minute sessions for one week. The change in skin was measured over three times in the week of the test, after six weeks of the test, and two weeks after the test had finished. The result showed that after six weeks of the test, in the experimental group, the skin tone (color brightness, saturation brightness, skin brightness) and moisture showed a significant increase (p<0.05), while the number of small hyper-pigmentation and large hyper-pigmentation, as well as the length of crow's feet, melanin, erythema showed a significant reduction (p<0.05). No significant differences in fine lines under the eyes and length of crow's feet were observed. Two weeks after the test was finished, the experimental group showed a significant decrease in the length of crow's feet and melanin (p<0.05), and a significant increase in skin brightness and moisture (p<0.05). Even after the test was completed, the skin brightness, fine lines, melanin, and moisture improved continuously. In conclusion, skin care using MTS and cosmetics containing spirulina was more effective on improving the skin tone, hydration, hyper-pigmentation, and fine lines, than skin care without using them.

• Microbiology and Biotechnology Letters
• /
• v.26 no.5
• /
• pp.435-441
• /
• 1998

Optimal conditions for the production of natural color, betacyanin were investigated by varying light intensity, C/N ratio, concentrations of phosphate and kinds of elicitors. Batch cultivation was employed to characterize cell growth and betacyanin production of 32 days. The maximum specific growth rate, ${\mu}$$\sub$max/, was 0.3 (1/day) for batch cultivation. The maximum specific production rate, q$\^$max/$\sub$p/, was enhanced 0.11 (mg/g-cell/day) at 3 klux. A light intensity of 3 klux was shown to the best for both cell growth and betacyanin production. The maximum specific production rate was 0.125 (mg/g-cell/day) at 0.242 (1/day), the maximum specific growth rate. The dependence of specific growth rate on the light lintensity is fit to the photoinhibition model. The correlation between ${\mu}$ and q$\sub$p/ showed that the product formation parameters, ${\alpha}$ and ${\beta}$$\sub$p/ were 0.3756 (mg/cell) and 0.001 (mg/g-cell/day), respectively. The betacyanin production was partially cell growth related process, which is different from the production of a typical product in plant cell cultures. In C/N ratio experiment, high carbon concentration, 42.1 (w/w) improved cell growth rate while lower concentration, 31.6 (w/w) increased the betacyanin production rate. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.26 (1/day) and 0.075 (mg/g-cell/day), respectively. Beta vulgaris L. cells under 1.25 mM phosphate concentration produced 10.15 mg/L betacyanin with 13.46 (g-dry wt./L) of maximum cell density. The production of betacyanin was elongated by adding 0.1 ${\mu}$M of kinetin. This also increased the cell growth. Optimum culture conditions of light intensity, C/N, phosphate concentration were obtained as 5.5 klux, 27 (w/w), 1.25 mM, respectively by the response surface methodology. The maximum cell density, X$\sub$max/, and maximum production, P$\sub$max/, in optimized conditions were 16 (g-dry wt./L), 12.5 (mg/L) which were higher than 8 (g-dry wt./L), 4.48 (mg/L) in normal conditions. The ${\mu}$$\sub$max/ and q$\^$max/$\sub$p/ were 0.376 (1/day) and 0.134 (mg/g-cell/day) at the optimal condition. The overall results may be useful in scaling up hairy root cell culture system for commercial production of betacyanin.

• Journal of Animal Science and Technology
• /
• v.48 no.4
• /
• pp.493-502
• /
• 2006

The slaughter weight (wt) is a most important economic factor in swine roduction. The present study was undertaken to determine if it is feasible to increase the slaughter wt of finishing pigs to 130kg without significantly affecting the growth efficiency and carcass quality. One hundred and sixty gilts and 160 barrows born from lean-type Yorkshire×Landrace (YL)-dam and Duroc (D)-sire lines, which are most widely used for terminal breeding for pork production in Gyeongsangnam-do, were randomly allocated into 16 pens under a 2 (sex)×2 (slaughter wt; 110 vs. 130kg) factorial arrangement of treatments. The animals were fed ad libitum a diet containing 3,200kcal DE/kg and 15.5% crude protein. After slaughter at the predetermined wt, yields of trimmed primal cuts and physicochemical characteristics of the longissimus dorsi muscle (LD) were measured or analyzed. Average daily gain was greater (P<0.01) in barrows than in gilts (0.86 vs. 0.79kg), but it was not different between the 110- and 130-kg slaughter wt groups (P>0.05). Backfat thickness was greater in the 130- vs. 110-kg group in both sexes (gilts: 21.6 vs. 17.6 mm, barrows: 25.1 vs. 20.8 mm). The yield percentage of belly was greater in barrows than in gilts (21.2 vs. 20.5%) and also in the 130-kg vs. 110-kg group (21.4 vs. 20.2%). Major physicochemical characteristics of LD including the color, percentage of 48-h drip loss, 24-h pH and percentages of crude protein and fat were not influenced by slaughter wt. Marginal profit of the 130-kg vs. 110-kg market pig was approximately 󰠏20,000 won/head, which resulted primarily from the heavy carcass weight of the former exceeding the upper limit of the A- or B-grade. However, if it had not been for the carcass weight limit of the current grading system, a 130-kg market pig would have had a potential marginal profit greater than 20,000 won. Results suggest that slaughter wt of lean-line finishing pigs can be increased to 130kg without significantly compromising the growth efficiency and carcass quality and accordingly, the upper weight limit of the ‘good-grade’ carcass needs to be increased or abolished to accommodate the larger market pigs.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.5
• /
• pp.1175-1184
• /
• 2014

Fermented anchovy of the favorite sea food in Korea made from anchovy (Engraulis japonica) and salt. The study was undertaken to investigate the effects of different retorting conditions on the quality of canned salt-fermented anchovy fillet. The salt fermented anchovy fillet was prepared by fermenting anchovy(Engraulis japonica) with salt(15%) at $5^{\circ}C$ for 15 days and then cold air drying the fermented fillet for 1 hour. The dried fermented anchovy fillet(85g) was filled with olive oil(60g) into can(301-1) and seamed using a vacuum seamer, and then sterilized at Fo 9 and 11 mins in a steam system retort at 12 $1^{\circ}C$, respectively. After sterilization with different heating conditions, the pH, VBN, amino-N, color value (L, a, b), texture profile, TBA value, sensory evaluation and viable bacterial count of the canned salt-fermented anchovy fillet were measured. In both sterilized cans, the viable bacterial counts were not detected. There was no remarkable difference in physicochemical and sensory quality between sterilization conditions. The results showed that sterilization of Fo 9 min was more desirable than that of Fo 11 min to prepare canned salt-fermented anchovy fillet.