• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.191-196
• /
• 2021

In this paper, we implemented an image sensor module possible of detecting color temperature in an indoor environment. The color temperature information in the video information acquired by the image sensor was matched with a color difference illuminometer to produce an LUT. An algorithm was developed so that color temperature information according to the received RGB values can be automatically calculated. As a result of measuring the color temperature with an image sensor indoors, an accurate result of less than 5.91% was obtained compared to the reference value. It was confirmed that the uniformity of 23.5% or more was excellent compared to the color temperature measurement result using a color sensor.

• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.382-389
• /
• 1993

In this research, the surface color of 'Fuji' apples and tomatoes were measured by using Sharp PD 151 semiconductor color sensors. The measurements were compared with color-difference-meter readings and with visual sensory test scores. A negative exponential function was developed which describe the relationship between the dominant wavelength of the surface color of 'Fuji' apples and the ratio of the photoelectric currents of the color sensor. Also a linear relationship was found for the surface color of tomatoes and the color sensor output. There were good correlations between the visual test scores and the color sensor output for both 'Fuji' apples and tomatoes.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.392-396
• /
• 2018

Structural color has many advantages over pigment based color. In recent years, researches are being conducted to apply these advantages to applications such as wearable devices. In this study, strain sensor, a kind of wearable device, was developed using structural color. The use of structural color has the advantage of not using energy and complex measuring equipment to measure strain rate. Wrinkle structure was fabricated on the surface of Poly-dimethylsiloxane (PDMS) and used it as a sensor which color changes according to the applied strain. In addition, a transmittance-changing sensor was developed and fabricated by synthesizing additional glass nanoparticles. Furthermore, a strain sensor was developed that is largely transparent at the target strain and opaque otherwise.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.174-182
• /
• 2015

In this paper, we developed the small size RGB sensor that recognizes a long distance using a low-cost color sensor. Light receiving portion of the sensor was used as a camera lens for far distance recognition, and illuminating unit was increased the strength of the light by using a high-power white LED and a lens mounted on the reflector. RGB color recognition algorithm consists of the learning process and the realtime recognition process. We obtain a normalized RGB color reference data in the learning process using the specimens painted with target colors, and classifies the three colors using the Mahalanobis distance in recognition process. We apply the developed the RGB color recognition sensor to a prototype of the part classification system and evaluate the performance of its.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1049-1054
• /
• 2011

Color is discerned due to the reflectance of object and its hue is determined by the Ratio of RGB spectrum. The aim of this study is to evaluate the Color information using by the optical system in terms of convenience and simplicity. Firstly, the differential Ratio of RGB is evaluated by photodiode Sensor which achieves a high efficiency with quick tranducer output. To extract the information of RGB Ratio, light emitting diode is built in Color sensing system with photodiode. Our proposed method is very economical, simple, and convenient. Our results can be applied to confirm the accurate information of Color in the research environments and commercial purposes. Thus RGB information can be determined subjectively and thus, the inherent characteristic of Color will be revealed precisely and its related features can be resolved in a real time mode.

• Tribology and Lubricants
• /
• v.24 no.1
• /
• pp.7-13
• /
• 2008

In this work, a simple and low cost sensor technique is proposed to test oil color in real time using in-line sensor. It is presented to use a ratio of intensity in red wavelength range to intensities of green and blue wavelength ranges (defined as a 'chromatic ratio') in order to estimate the oil color change. The proposed sensor technique is realized by irradiating a white LED as light source and a RGB color sensor as photoreceiver, and the chromatic ratio of various types of used oils are measured. The results show that chromatic ratio generally reflects chemical deterioration of oil, including oil oxidation and thermal degradation. It is concluded that the proposed sensor could be used for an effective oil monitoring technology.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.15-18
• /
• 2001

Recently, CMOS image sensor is rapidly used as an image capture device such as mobile phone or notebook PC. Because of poor quality of image by CMOS image sensor, ISP is essential step to improve image quality. In this paper, we implemented and simulated ISP algorithm for real time moving picture of CMOS image sensor. Especial Iy, we concentrated on color interpolation, which extracts three color component from uncompleted color information. Several algorithms for color interpolation are implemented and analyzed to acquire a good quality of picture. Finally, we proposed an improved algorithm and confirmed the effectiveness by experimental simulation results.

• Journal of Biomedical Engineering Research
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2014

Among semi-quantitative or fully quantitative lateral flow assay readers, an image sensor-based instrument has been widely used because of its simple setup, cheap sensor price, and compact equipment size. For all previous approaches, monochrome CCD or CMOS cameras were used for lateral flow assay imaging in which the overall intensities of all colors were taken into consideration to estimate the analyte content, although the analyte related color information is only limited to a narrow wavelength range. In the present work, we introduced a color CCD camera as a sensor and a color decomposition method to improve the sensitivity of the quantitative biosensor system which utilizes the lateral flow assay successfully. The proposed setup and image processing method were applied to achieve the quantification of imitatively dispensed particles on the surface of a porous membrane first, and the measurement result was then compared with that using a monochrome CCD. The compensation method was proposed in different illumination conditions. Eventually, the color decomposition method was introduced to the commercially available lateral flow immunochromatographic assay for the diagnosis of myocardial infarction. The measurement sensitivity utilizing the color image sensor is significantly improved since the slopes of the linear curve fit are enhanced from 0.0026 to 0.0040 and from 0.0802 to 0.1141 for myoglobin and creatine kinase (CK)-MB detection, respectively.

• Journal of the Optical Society of Korea
• /
• v.15 no.1
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.14-25
• /
• 2011

Full-Color LED lighting system requires efficient control of the lighting color in order to easily achieve various color effects. In this paper, we present not only a portable color scanner using color sensors which can control lighting color directly from detected color but also methods to convert detected color to a complementary color, similar colors and so on. In addition, we propose a compensation method for measured sensor color to reduce measurement errors more than 50[%] in detected color. The developed color scanner is applied to control full-color LED ceiling light for emotional lighting.