• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.281-288
• /
• 1991

Optical behaviors and dyeing properties of color solution extracted from arrowroot leaves were investigated. The wavelength of maximum absorption of the color solution appeared at 268 and 320 nm, respectively. The amount of colors extracted was increased with extracting temperature and time. Spectra of color solution are shifted to longer wavelength at higher pH values, and shifted to shorter wavelength by irradiation for 2 hrs. Remaining ratio of colors by irradiation decreased with increasing alkalinity of color solution. Degree of exhaustion on the silk fabrics was related to the concentration and pH of dyebath. Surface color of dyed fabrics, lightfastness and wash-fastness were variously according to mordant used. Hot water resistance and drycleaning fastness of dyed silk fabrics by treatment of mordants were all within commercially acceptable limits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.11-16
• /
• 2011

This study was aimed to apply thermochromic and photochromic pigments to coating color and to develop a speciality functional coated layer. Two special pigments were added to a conventional coating color. The effects of the special pigments on coating color properties such as water rerention, low-shear viscosity were evaluated. Also the color changes of coated paper was observed under various circumstances. The results showed that the special pigments didn't influence the coating color properties. The coated paper with the special pigments showed four different colors, under various circumstances, implying that thermochromic and photochromic pigments can be used to produce a security paper.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.2
• /
• pp.25-40
• /
• 1997

This research was carried out to investigated the effect of base paper and latex binder on printability and obtical properties of coated paper. Especially, it examined the effect of th pH of vase paper surface and functional groups of latices on the interactions between coating color components and on the structure of coated layer. It was found that the behavior of coating color containing amphoeric latex depends on the pH in the boundary region between coating color and base paper. Thus, the coating color formulated with amphoteric latex formed bulky coating layer by inducing stronger interaction between paper surface and coating components than the coating color with anionic latex. The coated paper with amphoteric latex showed better optical properties (i.e.gloss and optical) and printability (i.e. ink receptivity, wet ink receptivity, and ink set off) than the conventional anionic latex in the acidic and alkaline paper. However, dry pick strength of the coated paper was less decreased. This result indicated that amphoteric latex could also be applied practically to the alkaline paper.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.397-404
• /
• 2009

Using rice husk ash as silica, the influence of the firing temperature and holding time on the color intensity of Pr-$ZrSiO_4$ pigments were investigated. The Pr-yellow pigments were calcined at 500, 700, 800, 900, 950, 1000, $1100^{\circ}C$ in a ceramic method. The synthesized pigments were characterized by DT-TG thermal analysis, X-ray diffraction, UV-Vis spectroscopy, and SEMEDAX analysis. The relationship between the zircon phase-formation growth and Pr-yellow color development was evaluated and the optimum firing conditions were determined. The color of the pigment samples was characterized on the grounds of the Commission Internationale de l'Eclairage (CIE) standard procedure (CIE $L^*a^*b^*$ measurement) after an application on the bisque ceramic tile.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.24 no.2
• /
• pp.25-33
• /
• 2006

The reality of domestic prints neither possesses an objective standard of standard density nor a spectrophotometric method in regard to process ink. As a result, it creates a difficult communication between a designer and a Prepresser as to estimating the color of reproduction prints. There was an experiment on paper, ink, and printing company to obtain the standard point. The result shows that paper has minimum effect on color reproduction as opposed to ink and different printing companies, which had a great effect. The purpose of this paper is to confirm how different the color reproduction properties of prints are using densitometer and spectrophotometer for three different ink companies. The process color inks of three different companies were used under the same printing environment in this experiment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.733-736
• /
• 2006

In the many kind of construct-material, the concrete which has the high-strength and a durability is sufficient to use with structure-material. But the color of concrete is very monotony so generally concrete isn't used the out surface. although color concrete is a method of expressing surface, the combination of pigment and cement cause many Physical problem such as efflorescence phenomenon, strength degradation and so on. In this study, It attempt to develop the black mortar using the industrial by-product and to evaluate basic physical properties compare with general color concrete to solve the color concrete problem. The result of experiment showed that Black NSC which was made by-product has more visible black color than any mortar.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.37-46
• /
• 2001

In this study, We compared the properties of tinted and colored lenses with the standards m the ordinary optical properties, coloration, UV, IR and luminous transmittance, color acceptance for traffic signal, and chromaticity. The UV, lR and luminous transmittance was analysed in the range of 175 nm to 3000 nm by using a UV-Vis-IR spectrophotometer and was used in the synthesis of spectrum of various color lens. A experimental function was made from the slope obtained from the transmittance change as a function of coloration time. We could expect the ordinary optical properties and color acceptance for traffic signal of various color lenses with the requirements of US standard(ANSI Z-80.3).

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.379-384
• /
• 2009

Zirconia is widely used for structural materials in machinery due to its superior properties, such as high strength, high hardness, and high toughness. Zirconia generally has ivory or white color. Therefore many studies are performed for diversification of zirconia color, in order to be widely uitilized for decoration and machine parts which need distincfive color. In this study, graphite is used to prevent structural defect, to maintain superior properties, and to develop black color of zirconia by impregnation method. As specimen was impregnated at $1600^{\circ}C$ for 2 h, bending strength is 1221 MPa, density is $6.01\;g/cm^3$, hardness is 10.1 GPa, absorption coefficient is 0%, transmittance is Fail, chromaticity is 54. The results indicate that black zirconia has enough properties to be adopted as mechanical parts. Optimum impregnation time is 2 h for various observations.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.499-504
• /
• 2006

To improve the quality of coating paper, many areas, such as the manufacturing process of inorganic pigment for the coating, the property change of coating color, the surface design of coating pigment and the productivity of coated paper, were studied. In this study the physical properties and printability of coated paper were compared with the coating pigment to modify the surface of large particle and the coating pigment to mix together the large and small particles. After the coating color was mixed under the same conditions in order that the coating color has the same printability, the printability change caused by the surface modification of coating color was investigated. With the surface SEM of coated paper, the efficiency of the surface modification of coating pigment was investigated. The physical property and printability of coated paper, in addition to the physical properties of coating color, were compared and evaluated. Also, the efficiency of printability was evaluated, changing the mixing condition.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.24-29
• /
• 2002

The purpose of this study was to classify apparel fabrics according to rustling sounds and to analyze their transformed colors and mechanical properties. The rustling sounds of apparel fabrics were recorded and then transformed into colors using Mori's color-transforming program. The specimens were clustered into five groups according to sound properties, and each group was named as 'Silky', 'Crispy', 'Paper-like', 'Worsted', and 'Flaxy', respectively. The Silky consisted of smooth and soft silk fabrics had the lowest value of LPT, $\Delta$f ARC, loudness(z) and sharpness(z). Their transformed colors showed lots of red portion and color counts. The Crispy with crepe fabrics showed relatively low loudness(z) and sharpness(z), but diverse colors and color counts were appeared. The Paper-like showed the highest value of LPT, $\Delta$f and loudness(z). The Worsted composed of wool and wool-like fabrics showed high values of LPT, $\Delta$f loudness(z) and sharpness(z). The transformed colors of the Paper-like and Worsted showed the blue mostly but color counts were less than the others. The Flaxy with rugged flax fabric had the highest fluctuation strength, and their transformed colors showed diversity.