• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.19-27
• /
• 2002

This paper surveys the mordanting and dyeing properties of Sophora japonica L. Appropriate extraction, dyeing and mordanting condition of Sophora japonica L. were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Sophora japonica L. solution was 367.6mn, rutin solution was 365.6mn. The color of Sophora japonica L. solution was affected at pH 2 and pH 8~9. The optimum temperature to extract Sophora japonica L. was during 1 hour in 8$0^{\circ}C$. The effective dyeing temperature and time of silk were 10$0^{\circ}C$, 60min. K/S value of dyeing fabrics was increased by pre-mordanting treatment, especially Fe, Sn, Cr. In the case of Sophora japonica L. light fastness was increased by Fe mordanting. Perspiration fastness was better in acidic solution than that in alkaline solution. Fastness to rubbing and dry-cleaning were good in general.

• Textile Coloration and Finishing
• /
• v.7 no.3
• /
• pp.1-10
• /
• 1995

The optical behavior of coloring matter extracted from onion's coats, the depression effects of destruction, yellowing and W transmittance of silk treated with color solution of onion's coats color difference of silk fabrics dyed with acid dyes and drycleaning fastness of silk treated with color solution has been investigated. The results are as follows : 1) The coloring matter extracted from onion's coats by alkali-acid method appeared properties of aglycon type. 2) &{\lambda}_{max}&of color solution extracted by distilled water was found at 280 and 327nm. 3) The decrease of tensile strength and the elongation of the silk treated with color solution were depressed but those of untreated silk were increased by irradiation of UV light. 4) The yellowness index of silk treated with color solution showed a little change by irradiation. 5) The UV transmittance of silk treated with color solution was decreased as increasing concentration of color solution. 6) The color difference after dyeing with several acid dyes on treated and untreated silk fabrics showed remarkable changes. 7) Drycleaning fastness of silk treated by color solution was excellent.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.1
• /
• pp.5-9
• /
• 1999

In recent years, the line of increase in policy on tobacco production triggered a rise in the loading volume per bulk curing barn, and manufacturers boosted the output of their blowers in order to prevent dirty leaves in the process of curing. for this reason, we studied the effect of the reducing air flow in bulk curing chamber from the color fixing stage to the stem drying stage of flue curing process on physical properties of cured leaves. The control of air flow was composed of the reducing air velocity of blower by means of a voltage regulator (slidac), and condition before color fixing stage was all the same with the conventional curing method. As a result, an effectiveness of improvement in the physical properties of cured leaves were observed. The leaves cured by this method were somewhat orange in color of upper stalk position, better bodied, and less brittle compared with the leaves produced by conventional curing. However, the leaves cured by this method had a little sharpness and harshness. As to the physical properties, there was decreased in occurrence of flat leaves than that of conventional ones. On the other hand, in case of reducing air flow during the curing process, increase of price per kg reached to about 5 % compared with those of conventional curing method.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.31-40
• /
• 1997

The objectives of color reproduction in printing, photography, and digital hard-copy is an important problem. The Color is obsorved differently from illumination an obsorvation condition, and varied according to individual taste. Generally, the color reproduction system is designed with colorimetric color reproduction method. But the color gamut of the color reproduction system is different each other and the one device has nonlinear relationalship between the other. By these reason, to predict the reproduced color based on linear color transform method is difficult. Some methods of non-linear color transform by neural network was proposed. These method was theoretical useful and valid to transform from CIE color to device color. But more studies were needed to realize the non-linear color transform system. In this paper, we described a method to realize the non-linear color transform system by neural network. The optimum structure of the non-linear color transform system was found out. The structure of descrived system has four layer( input, output and two hidden layers.) Input and output layer have 3 units, and a hidden layer has 27 units. We trained 216 color-samples, and estimated the realized color transform system by 1115 color-samples. The average color difference between original color samples and transformed color samples was 2.54.

• Journal of the East Asian Society of Dietary Life
• /
• v.8 no.2
• /
• pp.155-161
• /
• 1998

Response surface methodology (RSM) was used for optimizing preparation conditions and monitoring the quality of buckwheat mook prepared using buckwheat starch. The textures(hardness, adhesiveness, cohesiveness and gumminess) of buckwheat mook were decreased in inverse proportion to the increase of water content. the L and b values of Hunter color parameters in buckwheat mook were increased in proportion to the increase of water content. However, The a value of Hunter color parameters of buckwheat mook were decreased in inverse proportion to the increase of water content. Organoleptic properties(color, form, taste and mouth-feel) of buckwheat mook showed a maximum score in 700ml(water content), 14min(gelatinization time)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.68-73
• /
• 2001

This experiment was executed to clarify the optimum condition of reductive bleaching for 100% color papers. The reductive bleaching of the color paper was desirable to be done under such conditions as high temperature over $60^{\circ}C$ and high consistency within possibly short time. The FAS bleaching like the sodium hydrosulfite required oxygen-free condition. Especially, as the mixture between pulps and chemicals was favored in case of the high consistency, it was actively recommended. Therefore, it is desirable to control the dosage with the type of the dyes, the nature, the dye content, the paper compositions, and the targeting initial and final brightness.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.30-38
• /
• 2003

Research to dyeing properties of Ulmi cortex extract, silk and cotton fabrics were dyed and mordanted. Dyes were extracted from distilled water according to different pH values. The dyeability of Ulmi cortex extract were evaluated by conditions of dyeing temperature, dyeing time, dyeing pH, mordanting temperature, mordanting time, mordanting concentration and color fastness, etc. IR spectrum possessed absorption band of -OH at $3400cm^{-1},\;C-H\;at\; 2940cm^{ -1},\;aromatic\;C=C\;at\;1628cm^{-1},\;1518cm^{-1},\;C-O\;at\; 1107cm^{ -1},\;1043cm^{-1}$. And the $\labmda$max of extract appeared at 220nm and 280nm, so the substance of Ulmi cortex extract were catechin and tannin. Surface color of dyed fabrics were reddish yellow~yellow~greenish yellow. From the color fastness test, the fabrics dyed with PH 7 extract were excellent in irradiation and washing. Mordanting improved the color fastness and K/S value of dyed fabrics.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.39-45
• /
• 2012

For a fundamental study for high concentration pigment coating, the effects of alkali swellable emulsion (ASE) type rheology modifier and surface adsorption emulsion (SAE) type rheology modifier on both the stability and the viscoelastic behavior of a coating color were elucidated. The coating color prepared with SAE type rheology modifier showed superior thermal and mechanical stability than that with ASE type. In the high concentration and high speed coating process, the mechanical stability of a coating color was a key parameter since both impact force and shear force were increased with the increase of coating color concentration and coating speed, respectively.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.993-1000
• /
• 2009

The development of a new type of soil-cement concrete pavement using volcaniclastic is the main purpose of this study. Various mixture ratios, specimens' penetration resistance, time of setting, slump flow of fleshly mixed concrete, compressive strength and color characteristics of hardened concrete were studied. It was concluded that the optimum weight ratio of cement:volcaniclastic to produce good properties of soil-cement concrete is 1:3 and the use of volcaniclastic as main aggregate can improve the concrete surface color that is warm earth-tone road color. Therefore, commercial development for soil-cement concrete pavement using volcaniclastic is highly promising.