• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.3
• /
• pp.8-13
• /
• 2010

For better picture quality in LCD TVs, it is important to reach a steady emitting state within as short a time as possible in the initial stage after the TV is turned on. The initial characteristics of LCD TVs are mainly determined by the properties of the backlight. In the present study, the photometric and spectroscopic properties of a 55-inch Cold Cathode Fluorescent Lamp (CCFL) and Light Emitting Diode (LED) backlights were investigated. The measured properties include time dependence of the spectrum, luminance, and color coordinates. The results show that the change in the spectroscopic properties of the LED backlight is smaller than that of the CCFL backlight. This indicates that the initial picture quality of the LCD TV with the LED backlight is superior to that with the CCFL backlight. The origins of this difference were discussed in relation to the inherent characteristics of the two light sources.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1547-1550
• /
• 2007

$YVO_4:Eu^{3+}$ thin film phosphor samples have been deposited by using RF magnetron sputter deposition technique with various deposition temperatures. The Effect of deposition temperature (room temperature to $450\;^{\circ}C$) on morphological, crystal structure, and luminescence properties of $YVO_4:Eu^{3+}$ thin film phosphor has also been investigated. As the deposition temperature increases, the size of crystal grain and surface roughness of thin film increases principally and its crystallinity also increases. It is found that the asdeposited $YVO_4:Eu^{3+}$ thin film excited either photon or electron shows typical luminescence spectra successfully. CIE color coordinates of $YVO_4:Eu^{3+}$ thin film phosphor with increasing deposition temperature moved towards more reddish region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1017-1020
• /
• 2003

The effect of doping Gd, La for Y into $YVO_{4}:Eu^{3+}$ red phosphor on its photoluminescence(PL) intensity has been investigated. $YVO_{4}:$Eu-based phosphors were prepared by solid-state reaction at temperature above $1200^{\circ}C$. Under UV excitation(254, 365 nm), it was measured that $YVO_{4}:Eu^{3+}$ was superior to a commercial red phosphor (Y,Gd)$BO_{3}:Eu^{3+}$ in terms of PL intensity and CIE color coordinates. When La, Gd were doped into $YVO_{4}:Eu^{3+}$, the change in the structure of the host material was observed. In result, when the ($Y{1_x}La_{x})VO_{4}:Eu^{3+}$ phosphors were excited by 365 nm excitation, its PL intensity was improved up to about 30 % for the case of x being $0.4{\sim}0.6$.

• KIEAE Journal
• /
• v.16 no.3
• /
• pp.35-46
• /
• 2016

Purpose: This paper aims to analyse the composition system of architectural elements including shape, kinetic and material elements of kinetic facades and establish the design parameter system as a common conceptual and practical knowledge sharing platform with mechanical and electrical experts. Method: This research has been conducted in a three steps. At first, 120 cases of external shading devices are analyzed and their classification criteria have been established. Secondly geometric, kinetic and material elements are categorized in a common kinetic facade coordinates system considering environmental effects and operation method, and the applicability of combination of each element are tested. Lastly core design parameters for each element have been established in a common office building installation coordinate. Result: Geometry elements are categorized into seven geometric shapes and kinetic elements is categorized into basic linear and rotational motion and combinational folding and rolling motion. The combined set of parameters for three elements composes the whole design parameters for architectural elements of kinetic façade. Design parameters of shape elements are composed of shape, installation and arrangement parameters; design parameters for kinetic elements are composed of axis and range parameters; and design parameters of material elements are composed of thermal, lighting and color parameters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.43-46
• /
• 2004

We demonstrated efficient white light emitting OLEDs with a single emissive layer structure, which was blue-emitting 1,4-bis[2,2-diphenylvinyl]biphenyl (DPVBi) doped with blue luminescent amino-substituted distyrylarylene amine (DSA-amine) and red luminescent [2,6-bis[2-[5-(dibutylamino) phenyl]vinyl]-4H -pyran-4-ylidene]propanedinitrile (DADB). Through the optimization of the device structure, the white light emission with full visible spectral range was obtained. Its CIE color coordinates was (0.32,0.42) at 10 $mA/cm^2$ and the external quantum efficiency, the luminance efficiency and the luminance yield were 3.7 %, 3.3 lm/W and 9.0 cd/A, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.46-47
• /
• 2008

Organic light-emitting diode is quick response speed, low power consumption and the self-interest has many advantages, such as insanity. So, organic light-emitting diode mechanism of light-emitting diode in order to more clearly understand the changes in the thickness of emitting materials for OLED characteristics of the simulation. emitting layer to a thickness of 10 [nm] ~ 100 [nm] changed the experiment, and hole transport layer 190 [nm] as a fixed. and emitting layer 10 [nm] ~ 100 [nm] to change the simulation results. Changes in the thickness of emitting layer gradually increased. depending on the emitting was 20 [nm] in the high 441 [lm / W] shows. and was gradually reduced. emitting layer 190 [nm] when fixed, hole transport layer, depending on changes in the thickness of 70 [nm] in the efficiency maximum value of 477 [lm / W], and was gradually reduced.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.3
• /
• pp.51-57
• /
• 2012

Pacman is known as the terminator of the loved classic game in the world. In this paper, classic pacman game without using a keyboard or a mouse we should be able to play the game with simple hand gestures. In other words, It use motion game to be a substitute for the hand direction key using the center coordinates. Also, movements of the monster is to be replaced depending on your hand movements by extracting a pointer of hand taking pictures in the MFC dialog using Cam. In this paper, YCbCbr image is convert to RGB images to extract skin color, and multiplication operations and hybrid median filtering was used in order to obtain better images. And it is used to obtain movement of the hand area based on obtain the center of gravity of the hand region.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.443-446
• /
• 2007

The novel blue light emitting material, 9,10-bis(3',5'-diphenylphenyl)anthracene (BDA) was synthesized by Suzuki coupling reaction and characterized by the measurements of 1H NMR, 13C NMR and FT-IR. The new anthracene derivative, which contains anthracene as a main core unit and 3',5'-diphenylphenyl group derivative as wings, has high fluorescence yield, good thermal stability, and high glass transition temperature at 188 oC. With the newly non-doped blue emitting material in the multilayer device structure, it was possible to achieve the current efficiency of 3.0 cd/A. The EL spectrum of the ITO/CuPc/α-NPD/BDA/Alq3/LiF/Al device showed a maximum wavelength (λmax) at 440 nm. The emitting color of device showed the blue emission (x,y) = (0.18,0.19) at 10 mA/cm2 in CIE (Commission Internationale de l'Eclairage) chromaticity coordinates.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.196-201
• /
• 2016

Rehabilitation exercises are the treatments designed to help patients who are in the process of recovery from injury or illness to restore their body functions back to the original status. However, many patients suffering from chronic diseases have found difficulties visiting hospitals for the rehabilitation program due to lack of transportation, cost of the program, their own busy schedules, etc. Also, the program usually contains a few medical check-ups which can cause patients to feel uncomfortable. In this paper, we develop a remote rehabilitation system with bio-signals by a stereo camera. A Kinect stereo camera manufactured by Microsoft corporation was used to recognize the body movement of a patient by using its infrared(IR) camera. Also, we detect the chest area of a user from the skeleton data and process to gain respiratory status. ROI coordinates are created on a user's face to detect photoplethysmography(PPG) signals to calculate heart rate values from its color sensor. Finally, rehabilitation exercises and bio-signal detecting features are combined into a Windows application for the cost effective and high performance remote rehabilitation system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.415.2-415.2
• /
• 2014

Cost-effective, robust devices for solid-state lighting industry that converts electricity to light revolutionize the current lighting industry. Phosphor materials used in these devices should be synthesized in a low-cost and effective method for use in WLEDs. In this presentation, the synthesis of Eu3+ ions doped BaMoO4 phosphor samples by a facile synthesis process for red component of WLEDs will be shown. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by using a field-emission scanning electron microscope and transmission electron microscope. These confirmed the formation of a shuttle like particles with perpendicular protrusions in the middle of the particle. The photoluminescence (PL) properties exhibited good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (~ 280-315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra, indicating the rich red emission. The results suggest that this phosphor is a good material as red region component in the development of tri-band UV excitation based WLEDs.