• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.82-87
• /
• 2010

The Hanji dyed with persimmon juice were useful goods in the past, but they are not widely used nowadays despite of their many strong points such as antibacterial and water-resistant properties. The object of this study is to provide useful data for developing new products by using them. We dyed traditional Korean hand-made papers (Hanji) with colorants extracted from fruits of Diospyros kaki and investigated the effect of various dyeing factors (mordant, mordanting method, pH of dyeing solution, light exposure time etc.) on optical and mechanical properties of the dyed Hanji. Changing mordant affected the color of dyed Hanji. The dyed Hanji after-mordanted with Cu mordant had the highest K/S value and showed the deepest yellow and red shade. The best mordanting method was an after-mordanting. The K/S value of dyed Hanji increased with decreasing pH of dyeing solution. The tensile index and size degree values of the Hanji were increased after dyeing.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.99-113
• /
• 2007

This study aims to investigate the concepts and characteristics of Metrosexual and Ubersexual image which are the recent fashion phenomena representing the lifestyles of comtemporary men, and to analyze the design of contemporary men's fashion based on the represented characteristics of these sexual images. To accomplish these ends, various related publications, articles and papers, divers serial publications, and numerous internet articles are collectively reviewed for theoretical studies, and design analysis are conducted for content analysis(style, color, material, detail, etc) using photo data taken from the collections from 2001 through 2006. The results of this study shows that recent appearance of Metrosexual and Ubersexual fashion image represents the change of aesthetic standards in the contemporary society. With the influence of sociocultural phenomena which allow the pursuit of individual personality, the contemporary men, instead of expressing the socialized sexual identity, came to acquire the freedom of sexual identity which represents their personal desires. As an expression of hmnan will to pursue unrestricted sensibility and aesthetic sense, these sexual phenomena of Metrosexual and Ubersexual will be reinterpreted and reappear in various forms as the social atmosphere and aesthetic standards changes.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.5
• /
• pp.117-124
• /
• 2019

When manufacturing concrete, several mineral admixture is added to improve the basic physical property and durability and to make economical concrete. Such mineral admixture includes fly ash, granulated blast furnace slag, silica fume, etc., and not only the studies about mixing these mineral admixtures but also the studies for the development of new materials have been steadily in progress. Recently, some researchers have found, as a part of the development of new materials, the rice straw ash can also be used as a pozzolanic material for concrete considering similar chemical properties of rice straw ash to that of rice husk ash. But there has been insufficient amount of study about it. So, this study was to investigate the possibility as mineral admixture of agriculture by-product, by analyzing properties of concretes using rice straw ash with replacement ratio in comparison with other mineral admixture. In order to measure amount of SiO2 of rice straw ash, XRF(X-ray fluorescence) analysis was tested. For the measure pozzolanic reaction of rice straw ash, pH change and color change was tested according to curing day. Also to evaluate properties of concrete using rice straw ash, slump test, air contents test and compressive strength was tested.

• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1063-1070
• /
• 2010

This study examined 12 types of towels with differing fabric material, function, quality, printing, pile length, twist, etc. from a towel company which manufactures and distributes products domestically. After 3 months of use by consumers, a consumer satisfaction survey was administered and results analyzed. Four types of towels were assigned to each group and the towels were used every day for 3 months. Participant feelings after using the towel for the first time and after using it for three months were investigated. The questionnaire consisted of 26 questions on a 5-point Licket-type scale. The first 13 questions measured perceptions of absorption, touch, fine fiber loss, contamination, deformation, drying speed, and design. Other questions compared differences between the two towel types in terms of their material, function, quality, printing, pile length, and degree of twisting. Results showed that, with regards to weight, consumers preferred towels between 130~150g and a thickness of around 1.7~1.8mm. The bamboo towel was considered superior to the cotton towel in terms of sense of touch and did not happen linter after washing. The antibacterial towel was considered better than the cotton towel in terms of absorption but in terms of contamination, participants felt the antibacterial towel became dirty more easily than the cotton towel. We thought that it might be influence of the color of towel. Low-quality towels became stiffer and misshapen more easily than higher-quality towels. But the study showed that the consumers did not perceive significant differences in the towels' quality. Printed towels became thinner and their color changed more with washing. The consumers preferred the design of jacquard towels to printed towels. Towels with short piles was happened more linter than the towel with long pile after washing. Non-twisted towel were better than the highly-twisted towel in terms of sense of touch and absorption but the non-twisted towel happened more linter after washing and became dirty more easily.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.231-237
• /
• 2001

This study was carried out to investigate characteristics of the red peppers for Kimchi preparation. Four cultivars of Korean red pepper with different color value, ten brands of commercial red pepper powder produced at different areas and paprika with imported from Spain were collected. These sample were analyzed for proximate composition, color, capsaicinoid and sensory evaluation, etc. Proximate composition was moisture of 12.6-17.13%, ash of 5.11-8.93%, crude lipid of 7.68-12.81% and crude protein of 11.35-16.72%. Free sugar content showed two-times among samples, the lowest sample was 11.35%(Shintaein), whereas the highest sample was 21.06% (Koisan). Capsaicinoid content of cultivars showed the highest value Dabok with 75.49 mg% and the lowest value Gusung with 18.77 mg%. American Spice Trade Association(ASTA) value, it was indicated redness of red pepper, showed very wide range of values with 47.3-144.7. Correlation coefficient($R^2$) of ASTA value and $a^* $was 0.87, while $R^2$ of 0.05 between of ASTA value and capsaicinoid contents. In sensory attributes, Dongbang(0.87 mg%) and Gusung(0.43 mg%) were not significantly different, while Dabok(1.74 mg%) was significantly different from other smaples in lag time, overall intensity and duration. The difference threshold of hot taste and ASTA value was over 1.0 mg%(capsaicinod content), 70(ASTA value), respectively.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.1-11
• /
• 2006

Many research demonstrations and commercial applications have been tried to develop face detection and recognition systems. Human face detection plays an important role in applications such as access control and video surveillance, human computer interface, identity authentication, etc. There are some special problems such as a face connected with background, faces connected via the skin color, and a face divided into several small parts after skin region segmentation in generally. It can be allowed many face detection techniques to solve the first and second problems. However, it is not easy to detect a face divided into several parts of regions for reason of different illumination conditions in the third problem. Therefore, we propose an efficient modified skin segmentation algorithm to solve this problem because the typical region segmentation algorithm can not be used to. Our algorithm detects skin regions over the entire image, and then generates face candidate regions using our skin segmentation algorithm For each face candidate, we implement the procedure of region merging for divided regions in order to make a region using adjacency between homogeneous regions. We utilize various different searching window sizes to detect different size faces and a face detection classifier based on a back-propagation algorithm in order to verify whether the searching window contains a face or not.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.129-138
• /
• 1998

Recently much attention is paid on the interest in putting Korean traditional clothes into practical use with reviewing a traditional culture. Thus, this study was made of clarifying the difference from sex and group by investigating morderns' consciousness, manner, purchasing and wearing state of Korean traditional dress. - It shows that since about the half of the person inquired doesn't wear the clothes once in a year, its frequency of wearing is very low. - The main reason for not wearing that clothes is due to its uneasiness of wearing. - In purchasing the clothes, color, tinning, quality of the clothes are important in order, and bright and luxurious colors are much favored. - About the half of the inquired possess that clothes, with most of them having about one or two dresses. - In a sort of their possession, man has Jeogori and Baji etc. and woman has only Chima, Jeogori and Sochima, or so. - It shows that while their interest in Korean traditional clothes is high, the interest in its practical wearing point of view is low. - In case of adult, interest in that clothes is relatively high in comparison with other group.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.223-230
• /
• 2012

This study researched the relationship between the element of "Favorable and Friendly" emotion on product design and the consumer's reaction to it. The emotional elements used here were proposed in the existing study. The research method was divided into 1st test and 2nd test. In the 1st test result, Favorable was related to "want to own, simple, new product and high-class", and also connected with "digital product, gaming product and computers". The products related to Friendly had association with the items about "interesting, cute, familiar, warmth and soft", and also connected with "simple product (toylike, household items, etc), low-price product, product which likes a friend, soft product, kitchen product and beauty treatments product, and so on". In the 2nd test, the preference of emotional product was high than general product, and it was known from the evaluation about design preference and design elements. If the preference was high following the order as: "Formativeness> Trend> Aesthetics> Color", the difference among the scores were small. And then the result about the relationship of emotional design factor "Favorable & Friendly" and evaluation of design preference & design elements was extraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.3
• /
• pp.42-48
• /
• 1990

This is a case report on an unusual - heavy buccal frenum in young lady which was treated by frenectomy, vestibuloplasty and total-palatal mucosal free graft. The authors noticed that this abnormal condition lead several chronic complications in young patient as like as premature loss of upper molar teeth, early and rapid loss of alveolar bone around insertion of frenum, over - extended eruption of lower molar teeth and abnormal mandibular movements, etc. After frenectomy and surgical extension of buccal vestiblue on both upper and lower posterior regions, we obtained a full - sized palatal mucosal graft and moved it on upper and lower extension area seperately as two pieces of free grafts to offer inherent function of denture - bearing mucogingiva and same color - matching with oral mucosa and to prevent post - operative relapse of vestibular height. We discussed here about unusual abnormality and their complications of unusual buccal frenum and its treatment.