• Membrane Journal
• /
• v.21 no.1
• /
• pp.13-21
• /
• 2011

This study investigated the fouling behavior of $Al_2O_3$ colloids on polyethylene microfiltration membrane. To examine the effect of operation variation on fouling, operating pressure was increased from 0.49 to 1.96 bar along with time elapses and then was reduced to 0.49 bar reversely. A hysteresis behavior was observed in the membrane permeate flux over pressure, revealing different fluxes at the same pressure according to the pressure control type, increasing and decreasing. Permeate resistance and its rate of increase was higher in the decreasing pressure cycle than in the increasing pressure cycle. At the initial period of filtration, fouling mechanism for the both cycles was governed by the cake filtration. The degree of fouling was higher in the decreasing pressure cycle compared with in the increasing pressure cycle.

• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.207-215
• /
• 2005

We present a finite difference solution for electrokinetic flow in rectangular microchannels encompassing Navier's fluid slip phenomena. The externally applied body force originated from between the nonlinear Poisson-Boltzmann field around the channel wall and the flow-induced electric field is employed in the equation of motion. The basic principle of net current conservation is applied in the ion transport. The effects of the slip length and the long-range repulsion upon the velocity profile are examined in conjunction with the friction factor. It is evident that the fluid slip counteracts the effect by the electric double layer and induces a larger flow rate. Particle streak imaging by fluorescent microscope and the data processing method developed ourselves are applied to straight channel designed to allow for flow visualization of dilute latex colloids underlying the condition of simple fluid. The reliability of the velocity profile determined by the flow imaging is justified by comparing with the finite difference solution. We recognized the behavior of fluid slip in velocity profiles at the hydrophobic surface of polydimethylsiloxane wall, from which the slip length was evaluated for different conditions.

• Korea-Australia Rheology Journal
• /
• v.15 no.4
• /
• pp.179-185
• /
• 2003

Associating polymers act as flocculants in colloidal suspensions, because the hydrophobic groups (hydrophobes) can adsorb onto particle surfaces and create intermolecular cross-linking. The steady-shear viscosity and dynamic viscoelasticity were measured for suspensions flocculated by multichain bridging of associating polymers. The effects of surfactant on the suspension rheology are studied in relation to the bridging conformation. The surfactant molecule behaves as a displacer and the polymer chains are forced to desorb from the particle surfaces. The overall effect of surfactant is the reduction of suspension viscosity. However, the additions of a small amount of surfactant to suspensions, in which the degree of bridging is low, cause a viscosity increase, although the number of chains forming one bridge is decreased by the forced desorption of associating polymer. Since the polymer chains desorbed from one bridge can form another bridge between bare particles, the bridging density over the system is increased. Therefore, the surfactant adsorption leads to a viscosity increase. The surfactant influences the viscosity in two opposing ways depending on the degree of bridging.

• YAKHAK HOEJI
• /
• v.23 no.3_4
• /
• pp.133-140
• /
• 1979

The adsorption of erythrosine in the aliphatic alcohols by antibiotics such as ampicillin anhydrous, ampicillin trihydrate, amoxicillin trihydrate, cephalexin monohydrate was studied. The adsorption isotherms were all described with Freudlich equation. From the various experimerts, it was found that the adsorption of erythrosine by antibiotics in the aliphatic alcohols was affected by the solubility of adsorbents. The adsoption in the mixture of aliphatic alcohols and water is related with the dielectric constant of mixed solvents. According to increase in the pH values of aqueous solution, the adsorption of erythrosine for antibiotics is decreased, but increased in the mixture of aliphatic alcohols and water. The adsorption of erythrosine in the suspension of antibiotics showed a correlation with the temperature. Colloidal silica which is used as stabilizer had a favorable effect on the adsorption of erythrosine in the suspension of antibiotics.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.17-22
• /
• 2003

This paper presents an experimental investigation of a reversible colloidal seismic damper, which is statically loaded, The porous matrix is composed from silica gel (labyrinth or central-cavity architecture), coated by organo-silicones substances, in order to achieve a hydrophobic surface. Water is considered as associated lyophobic liquid. Reversible colloidal damper static test rig and the measuring technique of the static hysteresis are described. Influence of the pare and particle diameters, particle architecture and length of the grafted molecule upon the reversible colloidal damper hysteresis is investigated, for distinctive types and mixtures of porous matrices, Variation of the reversible colloidal damper dissipated energy and efficiency with temperature, pressure, is illustrated.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.442-447
• /
• 2007

In order to improve the surface hardness of transparent plastic films, organic-inorganic hybrid coating solutions were synthesized by the sol-gel method. The coating solutions were prepared by adding GPTMS (glycidoxypropyl trimethoxysilane) to a colloidal silica (12 nm) suspension. PC(polycarbonate) substrates were dipped into the coating solutions and dried at room temperature for 10 min before being cured at $80^{\circ}C$ for 30 min. The effect of the solution pH and GPTMS content was investigated on the properties of coating films. The pencil hardness and adhesion to substrates of the coating films, prepared at acidic condition (pH 4), showed better properties than those at neutral or basic conditions. Also, the pencil hardness and adhesion to substrates of the coating films increased with increasing GPTMS content.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.2
• /
• pp.274-278
• /
• 1990

Metastases to the liver presents a common clinical problem in the management of patients with cole-rectal cancer, and are responsible for a high degree of morbidity and mortality associated with this malignancy. Unfortunately, attempts at preventing the development of liver metastases in "high risk" patients has so far been unsuccessful. Ongoing studies of adjuvant chemotherapy have not yet illustrated a significant increase in survival in patients receiving such therapy. The purpose of the study is to investigate the value of adjuvant radiotherapy given in the form of colloidal chromic phosphate P-32 suspension administered via portal vein after radical resection of the primary cancer, in preventing the growth of occult metastases in the liver. Twenty one patients (10 patients of treated group with 11 controls) were followed 18 months after operation. There was no significant change in the CBC and liver functions after administration of P-32 labeled colloidal chromic phosphate. The number of patients who showed local metastases at 18 months were 2 in the treated group and 3 in the control group. While liver metastases occurred in one patient at 6 months and in three at 12 months in the control group, there was no development of liver metastases by 12 months in the treated group. At 18 month follow-up CT scan one patient in the treated group showed a single nodule in the liver. In conclusion liver metastasis rate was lower in the patients who received colloidal P-32 chromic phosphate via portal vein after radical resection of the primary cole-rectal cancer.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.2
• /
• pp.59-66
• /
• 2003

A novel application of nano-technology in the field of engineering, called colloidal damper, is investigated. This device is complementary to the hydraulic damper, having a cylinder-piston construction. Particularly for colloidal damper, the hydraulic oil is replacedby a colloidal suspension, which is consisted from a nano-porous matrix with controlled architecture and a lyophobic fluid. In this experimental work, the porous matrix is composed from silica gel, with labyrinth architecture, coated by organo-silicones substances in order to achieve a hydrophobic surface. Water is considered as associated lyophobic fluid. The colloidal damper test rig and the measuring technique of the hysteresis are described. the influence of the hydrophobicity level upon the colloidal damper hysteresis is investigated, for silica gels with similar pores distribution. A certain desired shape of the hysteresis can be achieved by employing mixture of silica gels with different level of hydrophobicity and/or architecture. With these results, it is believed that the proposed damper can be designed and be applied to the desired structure.

• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.347-358
• /
• 2011

Two different schemes were adopted to fabricate ordered macroporous structures with face centered cubic lattice of air spheres. Monodisperse polymeric latex suspension, which was synthesized by emulsifier-free emulsion polymerization, was mixed with metal oxide ceramic nanoparticles, followed by evaporation-induced self-assembly of the mixed hetero-colloidal particles. After calcination, inverse opal was generated during burning out the organic nanospheres. Inverse opals made of silica or iron oxide were fabricated according to this procedure. Other approach, which utilizes ceramic precursors instead of nanoparticles was adopted successfully to prepare ordered macroporous structure of titania with skeleton structures as well as lithium niobate inverted structures. Similarly, two different schemes were utilized to obtain disordered macroporous structures with random arrays of macropores. Disordered macroporous structure made of indium tin oxide (ITO) was obtained by fabricating colloidal glass of polystyrene microspheres with low monodispersity and subsequent infiltration of the ITO nanoparticles followed by heat treatment at high temperature for burning out the organic microspheres. Similar random structure of titania was also fabricated by mixing polystyrene building block particles with titania nanoparticles having large particle size followed by the calcinations of the samples.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.215-232
• /
• 2000

The Valence(Z) of positively and negatively charged alumina particles in the dilute suspensions was analyzed with the electrical conductivity of the suspensions. The mobility of negative particles was lower than that of positive particles at a similar Z value because of the stronger effect of chemical bonding over the hydrated particle surfaces. The apparent viscosity of acidic suspensions of 1-40 vol % solid was lower than that of basic suspensions. This result was discussed based on the three important effects of the valence, concentration and nature of hydrated surface of alumina particles. The density of alumina compacts consolidated by filtration through gypsum molds became lower for the basic suspensions than for the acidic suspensions. This result was correlated to the properties of the colloidal alumina suspensions.