• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.137-143
• /
• 2009

It is necessary to develop driving assistant information in order to prevent a rear-end collision with a crashed car which is at the blind curve on highway. Laboratory experiments were performed using a driving simulator to keep the traffic environment constant. This research was evaluated the effect of driver behavior according to providing collision avoidance information which was consisted of advisory, caution, and warning information by the dangerous degree of traffic situation. Driver behavior was evaluated to analyze the collision avoidance with a crashed car, and glance behavior was examined to measure the eye movements to the display on which provided the collision avoidance information. After experiment, the significance was evaluated on provided collision avoidance information. As the result of this research, the number of collision accident is reduced when the phased information was provided. In addition, it is clear that auditory information is more important than visual information in the case of providing the second information.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.9-15
• /
• 1999

The Analysis of spray characteristics for combined spray group are necessary to develop large rocket engine. In this study, basic effects of interaction from spray fan formed by impinging jets were investigated with respect to mass distribution, droplet velocities and diameter. Patternater and PDPA are used for experimental apparatus. Water was used as a test fluid When momentum ratio is 1, effect of interaction from collision of spray fan on mass distribution are small. Also, effect of interaction from collision of spray fan on droplet velocities and diameter are small. But, droplet diameter is smaller near collision point due to second collision. Therefor, for the same momentum ratio from spray fan formed by impinging jets, we may neglect effect of interaction on mass distribution, droplet velocities and diameter.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.634-641
• /
• 1998

Quasiclassical trajectory calculations were carried out for the reactions of $H+H_2$ (V=O, J=O) and its isotope variants on the Siegbahn-Liu-Truhlar-Horowitz potential energy surface for the relative energies E between 6 and 150 kcal/mol. The goal of the work was to understand the inter- and intramolecular isotope effects. We examine the relative motion of reactants during the collision using the method of analysis that monitors the intermolecular properties (internuclear distances, geometry of reactants, and final product). As in other works, we find that the heavier the incoming atom is, the greater the reaction cross section is at the same collision energy. Using the method of analysis we prove that the intermolecular isotope effect is contributed mainly by differences in reorientation due to the different reduced masses. We show that above E=30 kcal/mol recrossing also contributes to the intermolecular isotope effect. For the intramolecular isotope effect in the reactions of H+HD and T+HD, we reach the same conclusions as in the systems of $O(^3P)+HD$, F+HD, and Cl+HD. That is, the intramolecular isotope effect below E=150 kcal/mol is contributed by reorientation, recrossing, and knockout type reactions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.116-126
• /
• 2010

The Korean rolling stock safety regulation stipulates that the collision deceleration of a car body should be maintained under average 5g and maximum 7.5g during train collisions. One-dimensional dynamic model of a full rake train, which is made up of nonlinear springs/bars-dampers-masses, is often used to estimate the collision decelerations of car bodies in a basic design stage. By the way, the previous studies have often used some average force-deformation curve for energy absorbing structures in rolling stock. Through this study, we intended to analyse how much the collision deceleration levels are influenced by the initial peak force modeling in the one-dimensional force-deformation curve. The numerical results of the one-dimensional dynamic model for the Korean High-Speed Train show that the initial peak force modeling gives significant effect on the collision deceleration levels. Therefore the peak force modeling of the force-deformation curve should be considered in one-dimensional dynamic model of a full rake train to evaluate the article 16 of the domestic rolling stock safety regulations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2008

The ship's maneuverability is the important factor to avoid ship's collisions. The ship's maneuverability is usually measured in a deep water, and the turning ability is decreased and the course stability is improved in a shallow water. The variation of the turning ability could cause the risk of collision. In this paper, we proposes application technique of Variable Safe-Guard Ring to consider the shallow water effect and to be simple to estimate the grade of collision risk simultaneously. Through the mathematical simulation, the availability of new method was varified. Therefore this method is expected enough to support a maneuver for collision avoidance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.2
• /
• pp.65-71
• /
• 2018

In order to make the underwater vehicle carry out the mission in a submarine environment, it is needed to plan a safe and efficient route to a given destination and prevent the autonomous submersible from colliding with obstacles while moving along the planned route. The function of collision avoidance makes the travel distance of the autonomous submersible longer. Moreover, it should move slowly near to obstacles against their moving disturbance. As a result, this invokes the degradation of the navigation efficiency in the process of collision avoidance. The side effect of the collision avoidance is not ignorable in the case of high congested environments such as the coast with many obstacles. In this paper, we suggest a path planning method which provides the route with minimum travel time considering collision avoidance in congested environment. For the purpose, we define environmental congestion map related to geometric information and obstacles. And we propose a method to consider the moving cost in the RRT scheme that provides the existing minimum distance path. We verified that the efficiency of our algorithm with simulation experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.12
• /
• pp.1039-1045
• /
• 2016

We investigated the protection capability of a plate against high speed projectiles demonstrating collision and penetration behaviors by finite element analysis. The element erosion method was used for penetration analysis, which showed that the speed of the projectile was slightly reduced by the collision with the protection plate. Protection capability was measured by the projectile's attitude angle change because the damage of our tanks by projectiles was also dependent on the projectile-tank collision angle. When the length of the protection plate was sufficiently long, the projectile was severely deformed and incapacitated. In the case of a small plate, the projectile was deformed only in the collision region. Thus, projection capability was investigated by the change of attitude angle. The effect of collision angle, velocity, and length of the plate on the rotational and vertical velocities of the projectile was investigated.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.427-432
• /
• 2006

The purpose of the present study was to investigate the effect of mariner's situation awareness(SA) training on navigation performance using a full mission ship-handling simulator. For this purpose, the mariners were trained in terms of various aspects of SA. Independent variables such as risk levels of ship-to-ship collision, navigational route types of 'target ship(TS)', and number of ships around the own ship(OS) were systematically varied, and dependent variables of closest point of approach(CPA) between TS and OS, number of collision, types of collision-avoidance strategy were measured The results can be summarized as followings. First, training on mariner's SA appeared to induce improved performances in various aspects of ship handling. Second, mariners in the routine navigation situation where TS had priority following maritime rules seemed to suffer to prepare collision avoidance when the TS altered its route. However, this tendency greatly reduced after the training These results suggest the benefit of mariner's SA training on maritime safety.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.7-11
• /
• 2003

Ship is being operated under a highly dynamic environments and many factors are related with ship's collision and those factors are interacting. So, an analysis on the ship's collision causes is very important to prepare countermeasures which will ensure the safe navigation. And the analysis confirmed that ship's collision is occurred most frequently and the cause is closely related with human factor. The main purpose of this study is to build a model of human factors in ship's collision cause using SD(System Dynamics} approach and to measure a effect which is risk control countermeasures of ship's collision. To achieve this aim, the structure analysis on the causes of ship's collision using FSM are performed, and the structure was changed by quantitative, qualitative factors and their feedback loops in casual map. This model was performed over 20 years(1993-2012) in a standard simulation model and 8 policy simulation models.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.493-498
• /
• 2003

Ship is being operated under a highly dynamic environments and many factors are related with ship's collision and those factors are interacting. So, An analysis on the ship's collision muses is very important to prepare countermeasures which will ensure the safe navigation. And the analysis confirmed that ship's collision is occurred most frequently and the muse is closely related with human factor. The main purpose of this study is to build a model of human factors in ship's collision muse using SD(System Dynamics} approach and to measure a effect which is risk control countermeasures of ship's collision. To achieve this aim, the structure analysis on the muses of ship's collision using FSM are performed, and the structure was changed by quantitative, qualitative factors and their feedback loops in casual map. This model was performed over 20 years(1993-2012) in a standard simulation model and 8 policy simulation models.