• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.58.1-59
• /
• 2021

Exploration of asteroids' internal structure is essential for understanding their evolutional history. It also provides a fundamental information about the history of coalescence and collision of the solar system. Among several models of the internal structures, the rubble-pile model, confirmed by the near-Earth asteroid (25143) Itokawa by Hayabusa mission [1], is now widely regarded as the most common to asteroids with size ranging from 200 m to 10 km [2]. On the contrary, monolithic and core-mantle structures are also possible for small asteroids [3]. It is, however, still challenging to look through the interior of a target object using remote-sensing devices. In this presentation, we introduce our ongoing research conducted at Seoul National and propose an idea to infer the internal structure of Apophis using available instruments. Itokawa's research provides an important benchmark for Apophis exploration because both asteroids have similar size and composition [4][5]. We have conducted research on Itokawa's evolution in terms of collision and space weathering. Space weathering is the surface alteration process caused by solar wind implantation and micrometeorite bombardment [6]. Meanwhile, resurfacing via a collision acts as a counter-process of space weathering by exposing fresh materials under the matured layer and lower the overall degree of space weathering. Therefore, the balance of these two processes determine the space weathering degrees of the asteroid. We focus on the impact evidence on the boulder surface and found that space weathering progresses in only 100-10,000 years and modifies the surface optical properties (Jin & Ishiguro, KAS 2020 Fall Meeting). It is important to note that the timescale is significantly shorter than the Itokawa's age, suggesting that the asteroid can be totally processed by space weathering. Accordingly, our result triggers a further discussion about why Itokawa indicates a moderately fresh spectrum (Sq-type denotes less matured than S-type). For example, Itokawa's smooth terrains show a weaker degree of space weathering than other S-type asteroids [7]. We conjecture that the global seismic shaking caused by collisions with >1 mm-sized interplanetary dust particles induces granular convection, which hinders the progression of space weathering [8]. Note that the efficiency of seismic wave propagation is strongly dependent on the internal structure of the asteroid. Finally, we consider possible approaches to investigate Apophis's internal structure. The first idea is studying the space weathering age, as conducted for Itokawa. If Apophis indicates a younger age, the internal structure would have more voids [9]. In addition, the 2029 close encounter with Earth provides a rare natural opportunity to witness the contrast between before and after the event. If the asteroid exhibits a slight change in shape and space weathering degree, one can determine the physical structure of the internal materials (e.g., rubble-pile monolithic, thick or thin regolith layer, the cohesion of the materials). We will also consider a possible science using a seismometer.

• Journal of Biosystems Engineering
• /
• v.8 no.2
• /
• pp.18-25
• /
• 1983

The binders introduced in Korea were originally designed to be used for Japonica varieties which have realtively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during its operation. This study was intended to investigate the binding unit, one of the major factors affecting grain losses. The binding parts of three binders used in Korea were analyzed and the grain loss was experimentally assessed for these binders. The results obtained from this study are summarized as follows: 1. From the motion analysis of discharge mechanism, the trajectory of the discharge arm appeared to be either circular or skewed elliptic. The velocity of a circular path mechanism was constant and smaller than that of a skewed elliptic path mechanism. The discharge grain loss of the former was about twice less than that of the latter. 2. It was found that the grain loss incurred due to the collision of the paddy bundles and ground was considerably high for Tongil varieties. The auxiliary discharge bar gave a significant influence on the motion and posture of the bundles, and the degree of impact on ground. 3. The installation of an auxiliary bar, which guides the paddy bundles smoothly to ground in order to reduce impact when the bundles fall down on ground, appeared to be very effective since the grain losses could be decreased by about 1.6 percentage point. However, the guide bar should be installed after some mechanical modification to reduce the velocity of discharge arm has been made.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2011

Since the study of building performance design was first undertaken by Building Research Station in 1930s, the results of such study has been reported from many parts of the world, building construction codes and standards have been revised based on performance in advanced nations as well in Korea, and various performance certification systems are in operation. The purpose of this study is to build a database of performance certification systems to investigate the co-relationship of various test methods related to the same test items. As test methods for case study, we selected test methods involving collision of the human body. Through analysis of Critical fall height test of EN 1177 and Head Model test of JIS A 6519 about 8 species of floor test-bodies, it was found that there are limits of application in terms of the depth and strength of cushion. Furthermore, although the measured physical parameters are the same, when the co-relationship between test methods is uncertain, the various physical parameters may not be compatible with the results.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.1-6
• /
• 2015

The actual condition is that environmental pollution due to the development of various industries has recently become a serious issue. An interest in improving the gas mileage is rising due to an increase in the number of vehicles in the era of high oil price in particular. In order to solve this problem, priority should be given to light-weight design of car body, However, at present, a design method enabling the conventional steel plate to be replaced is direly needed in order to guarantee passengers' safety according to excessive light-weight design of car body. In this study, in order to apply a design method that could realize fuel savings and environmental pollution prevention through an improvement in gas mileage together with meeting the safety requirements for vehicles, it was supposed that CFRP/Al composites member would be used as primary structural member. And to this end, it was intended to obtain optimum design data by experimentally implementing external impulsive load applied to the car body. According to results of impact test of CFRP/Al composites member, a collapsed shape of folding, crack, and bending occurred. So, it was possible to find that energy was observed. And in case of specimen having an angle of $90^{\circ}$ in the outermost layer and stack sequence of $[90^{\circ}{_2}/0^{\circ}2]s$, its collapsed length was shown to be short. Therefore, it was possible to find that the absorbed energy was shown to be higher by 20% or above at the maximum.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.10-19
• /
• 2014

Despite the movement of safe traffic by the Korean government to reduce deaths in traffic accidents, the casualties increase year by year. In particular, more and more accidents and casualties are reported from car collisions from the back of the vehicles parked for managing traffic accidents on the road, cleaning main roads and medial strips, repairing roads. In order to response to these accidents, the government should take protective measures for road users. In the last decade, seventy-one cases have been reported to occur during highway repair and maintenance. As a result, eight persons were killed and seventy-six were injured, showing the high death rate of 11.3 percent. Therefore, it seems urgent to take some actions against it. The United States and European countries legislate that vehicles of road repair and maintenance should be mandatorily equipped with shock absorber at the back. Korea, however, does not have such legislative measures, which are needed at this time to protect workers on the road. This study compares the performance of the traditional shock absorber for road maintenance vehicles with that of the rear safety guard using air bag, manufactured in accordance with related laws in Korea. Based on the results of the 60km/h rear collision test, this paper proposes improvements in related laws and regulations in an attempt to reduce casualties.

• Korean Journal of Food Science and Technology
• /
• v.9 no.1
• /
• pp.61-67
• /
• 1977

Seed separation from half-cut red pepper were investigated with free falling, up-and-down shaking and rotating collision methods. The separation rates were related with impact appiied and the rotating case was distinguished from the other two methods. Beside the impact effect, velocity of the pod and tumbling factors were involved. Momentum effectiveness of seed separation were calculated as $2.50{\times}10^{-6}$, $2.09{\times}10^{-6}$, and $3.94{\times}10^{-8}$ for free falling, shaking and rotating method on the same velocity basis, respectively. The tendency of separation rate was similar to that of red pepper drying rate against time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.373-384
• /
• 2013

This paper is the second paper among two papers which constitute the paper about the rigid body dynamic analysis on the spent nuclear fuel disposal canister under accidental drop and impact to the ground. This paper performed the numerical study on the rigid body dynamic analysis. Through this study the impulsive force which is occurring in the spent nuclear fuel disposal canister under accidental drop and impact to the ground and required for the structural safety design of the canister is computed numerically. The main content of this numerical study is about the technical method how to compute the impulsive forces occurring in the canister under accidental drop and impact to the ground by using the commercial rigid body dynamic analysis computer codes. On the basis of this study the impulsive force which is occurring in the canister in the case of collision with the ground is numerically computed. This numerically computed impulsive force is increasing as the canister weight is increasing, and the canister falls plumb down and collides with the ground in three types according to the analysis results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.75-86
• /
• 2019

The biggest obstacle in the nuclear power generation is the high level radioactive waste such as the spent nuclear fuel. High level radioactivities and generated heat make the safe treatment of the spent nuclear fuel very difficult. Nowadays, the only treatment method is a deep geological disposal technology. This paper treats the structural safe design problem of the spent nuclear fuel disposal canister which is one of the core technologies of the deep geological disposal technology. Especially, this paper executed the nonlinear structural analysis for the stresses and deformations occurring in the canister due to the impulsive force applied to the spent nuclear fuel disposal canister in the case of an accidental drop and ground impact event from the transportation vehicle in the repository. The main content of the analysis is about that the impulsive force is obtained using the commercial rigid body dynamic analysis computer code, RecurDyn, and the stress and deformation caused by this impulsive force are obtained using the commercial finite element static structural analysis computer code, NISA. The analysis results show that large stresses and deformations may occur in the canister, especially in the rid or the bottom of the canister, due to the impulsive force occurring during the collision impact period.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.241-249
• /
• 2022

Humans and wild birds coexist in cities, where habitat fragmentation due to urbanization threatens the habitat and movement of birds. In this study, in order to identify landscape features associated with wild bird collide, we characterized landscape composition within a 500 m radius and points of wild bird carcasses in Suwon-city, South Korea. Dead birds were identified as having a Normalized Difference Vegetation Index (NDVI) of 0.3, Normalized Difference Built-up Index (NDBI) of -0.05, and Normalized Difference Water Index (NDWI) of -0.16 at the points of collide. And there were NDVI of 0.34, NDBI of -0.01, NDWI of -0.18, building height of 13.8 m, and soundproof wall length of 227.3 m within a radius of 500 m. Land cover type was dominated by grassland, used area, and bare land. In particular, the edges of urbanized areas, where apartments bordered forests, reservoirs, and golf courses, were identified as high-risk spaces. In order to minimize bird mortality risk in urban environments, the impact of changes to a vertical landscape should be reviewed from an environmental impact assessment approach. In addition, a preventive management plan that considers the temporal and spatial features that wild animals can safely avoid and adapt to in urbanized spaces should be prepared.

• Korean Journal of Crystallography
• /
• v.17 no.2
• /
• pp.60-65
• /
• 2006

표면 및 계면층의 결정구조, 결함구조, 불순물 편석, 표면의 전자 구조, 원자 진동 등과 같은 산화물의 표면물성은 촉매, 센서, 소결, 마찰, 부식 등과 같은 분야에서 그 특성을 좌우한다. 고체 표면의 결정구조 해석 수단으로 저에너지 이온산란 분광법이 유용한 도구로 알려져 있는데, 이 방법의 뛰어난 표면민감성은 표면에서의 효과적인 이온 중성화 과정에 기인한다. $He^+$, $Ne^+$, $Ar^+$ 등과 같은 이온은 Auger 중성화 과정에 의하여 쉽게 중성원자화 되고, 중성화 확율의 타겟에 대한 의존성이 낮기 때문에 이온빔으로서 종종 사용된다. 산란각도를 180$^{\circ}$로 고정하여 산란이온 검출기를 설치한 직충돌 이온산란 분광법의 경우는 산란된 이온의 궤적이 입사궤도와 거의 동일하기 때문에 산란궤적의 계산이 간단해지고, 수 층 깊이의 원자구조의 해석이 가능해진다. 본 고에서는 고체 표면의 원자구조를 실공간에서 해석할 수 있는 직충돌 이온산란 분광법에 대하여 측정의 기본원리, 측정장치, 간단한 분석 예 등에 관하여 기술하고자 하며, 다음 편에서는 복잡한 표면구조를 가지는 반도체 표면에서 직충돌 이온산란분광법의 이용하여 해석한 예를 중심으로 기술하고자 한다.