• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.23-28
• /
• 2015

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol for WSN(wireless sensor networks), was developed to provide higher synchronization accuracy and energy efficiency. So, TPSN's approach has been referenced by so many other WSN synchronization schemes till now. However, TPSN has a collision problem due to simultaneous transmission among competing nodes, which causes more network convergence delay for a network-wide synchronization. A Polling-based scheme for TPSN is proposed in this paper. The proposed scheme not only shortens network-wide synchronization time of TPSN, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2022

Collision analysis involving a vehicle frame that includes a battery and a battery case was performed using a carbon fiber composite material (CFRP) and a glass fiber-reinforced plastic (GFRP), which are lightweight materials. Three types of collisions were analyzed: frontal collisions, partial frontal collisions, and side collisions. The maximum stress and deformation levels were measured for each case. To evaluate the stability of ignition and explosion potential of the battery, the maximum stress of the frame was measured before measuring the direct stress to confirm whether the collision energy was sufficiently absorbed. The deformation level of the battery case was measured to confirm whether the battery case affects the battery directly.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.1
• /
• pp.33-39
• /
• 1982

An experimental investigation on the ultimate load and energy absorption of thin plates is presented, which enables the damage to ship involved in a collision to be estimated in terms of the lost kinetic energy. The derived formulae are based upon experimental analysis and compared with theoretical presentations published by some authors. A relationship is found between the absorbed energy and the volume of damaged steel plates.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.4
• /
• pp.1-10
• /
• 1982

An experimental investigation on the energy absorption of two staged combined structures is presented, which deals with the plastic collapse test as a series of research on soft bow structure involved in a ship collision. The principle of arithmetic superposition of energy absorption is derived upon experimental analysis and based upon the characteristics of the energy absorptions of component structures. This relationship is related to the further approach toward the design of soft bow.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.283-288
• /
• 2001

We have investigated aluminum cluster deposition using a classical molecular dynamics simulations. We studied the variations of the cluster momentum and the impulse force during collisions, and found that the close-packed cluster impact has some of properties of the single particle collision and the linear atomic chain collisions. We also simulated the series of energetic cluster deposition with energy Per atom. When energy Per atom in cluster has some eV rather than very low, the intermixing occurred easily in growth film and we can obtain a good film without subsequent annealing process.

• Journal of the Korean Ceramic Society
• /
• v.34 no.11
• /
• pp.1121-1128
• /
• 1997

In this study, the Ar plasma treatment was used to improve the surface roughness of Poly-Si1-xGex thin film deposited by RTCVD. The surface roughness and the resistivity of Si1-xGex thin film were investigated with variation of Ar plasma treatment parameters (electrode distance, working pressure, time, substrate temperature and R.F power). When the Ar plasma treatment was used, the cluster size decreased by the surface etching effect due to the increasing surface collision energy of particles (ion, neutral atom) in plasma under the conditions of decreasing electrode distance and increasing pressure, time, temperature, and R. F power. Although the surface roughness value decreased by the reduction of the cluster size due to surface etching effect, however, the resistivity increased. This may be due to the surface damage caused by the increasing surface collision energy. It was concluded that the surface roughness could be improved by the Ar plasma treatment, while the resistivity was increased by the surface damage on the substrate.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.180-191
• /
• 2001

The widely used spot welded sections of automobiles(hat and double hat shaped section members) absorb most of the energy in a front-end collision. The sections were tested with respect to axial static(10mm/min) and quasi-static(1000mm/min) loads. Based on these test results, specimens with various thicknesses, width ratios and spot weld pitches on the flange were tested at high impact velocity(7.19m/sec and 7.94m/sec) which simulates an actual car crash. Characteristics of collapse have been reviewed and structures for optimal energy absorbing capacity is suggested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1494-1500
• /
• 2004

A zero-dimensional direct simulation Monte Carlo(DSMC) model is developed for simulating diatomic gas including vibrational kinetics. The method is applied to the simulation of two systems: vibrational relaxation of a simple harmonic oscillator and translational-rotational-vibrational energy exchange process under heating and cooling. In the present DSMC method, the variable hard sphere molecular model and no time counter technique are used to simulate the molecular collision kinetics. For simulation of diatomic gas flows, the Borgnakke-Larsen phenomenological model is adopted to redistribute the translational and internal energies.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.469-477
• /
• 2012

This paper describes the characteristic analysis of ice impact force for the Arctic structure shape. In the present study an energy method has been used to predict the impact force during the ice-structure collision. This study also employs two concepts for reference contact area and normalized stress in analysis procedure. The influences of factors, such as impact velocity, full penetration depth, structure shape and ice floe size, are investigated. Full penetration occurs, particularly at lower impact velocity when ice thickness increase. But "typical size" ice floe does not expected ever to achieve full penetration during the impact procedure. The structure shape is the dominant factor in ice impact force characteristic. The results for various ice-structure collision scenarios are analyzed.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.660-667
• /
• 1996

The electron transport characteristics in $SF_6$ gas is calculated for range of E/N values from 150 -800(Td) by the Monte Carlo simulation using a set of electron collision cross sections determined by the authors. The results suggest that the value of an electron swarm parameter such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients in nearly agreement with the respective experimental and theoretical for a range of E/N. The electron energy distributions function were analysed in sulphur hexaflouride at E/N:500 and 800(Td) for a case of the equilibrium region in the mean electron energy. The validity of the results obtained has been confirmed by a Time of Flight method also investigated as a set of electron collision cross section for sulphur Hexaflouride.