• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.32-38
• /
• 2020

본 연구에서는 1차원 충돌해석 방법을 이용하여 기존 철도차량 화물차량의 충돌 가속도 분석을 통해 기존 차량의 문제점을 확인하고, 충돌 안전성 향상 대안을 제시하고자 한다. 화물 철도차량의 국내 충돌사고 사례 및 유럽 및 북미 규격 분석을 통해 입환충격 상황과 충돌사고 상황 시나리오를 선정하였다. 차량의 질량과 연결기의 하중-변위 특성을 고려하여 화차용 1차원 충돌해석 모델을 개발하였으며, 상용 유한요소 해석솔버인 LS-DYNA를 이용한 1차원 충돌 해석을 수행하였다. 해석 결과 충돌속도 10km/h 이내의 입환충격 상황에서 화차의 가속도 레벨은 EN 12663 규격에서 제시하는 2g 이하로 안정된 수준으로 예측되었지만, 충돌속도 15~30 km/h 사이의 충돌사고 상황에서는 연결기의 완충용량 부족으로 차체의 변형 및 가속도 레벨의 증가가 예측되어 차체 구조 및 적재 화물의 안전에 취약한 구조임을 확인하였다. 충돌안전성 향상 방안으로 화차에 재료의 소성변형을 이용한 비가역적 충돌에너지 흡수장치를 적용하여 동일 시나리오로 충돌해석을 수행하였고, 기존 차량 대비 최대 12% 수준으로 가속도 레벨이 감소된 것을 확인하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.223-228
• /
• 2001

In this paper, crashworthiness of the KHST carbodies is evaluated by numerical simulation under the SNCF accident scenario (collision against a movable rigid mass of 15 ton at 110 kph) and the scenario of train-to-train collision at 30 kph. The numerical results of the several simulations, such as the accident collided against a deformable dump truck of 15 tons at 110 kph, the driver's dummy analysis using the integrated analysis method, and the accident of train-to-train collision for the first three units at 30 kph, show good performances in the viewpoint of energy absorption and survival space.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.396-408
• /
• 2019

The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.

• Journal of Ship and Ocean Technology
• /
• 제6권3호
• /
• pp.1-12
• /
• 2002

In this paper the results are reported of sixty-nine lateral collision tests, which were performed to investigate the collision resistance of plates. For the tests a collision testing machine of spring-roller conveyer type was designed and fabricated. Using this machine, various plates were tested with different masses and velocities and various headers of the striker. A simple analytical method has also been developed to predict the extent of damage of struck plates due to lateral collision. In the method, it is assumed that the kinetic energy of the striker can be dissipated by the formation of yield lines and membrane tensions in the impacted plate. The calculated predictions of extent of damage using the developed method have been substantiated with the test results, which shows reasonably acceptable correlations.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.193-200
• /
• 2004

In this study, the impact load on bridge by vessel collision in consideration of fender system is evaluated by numerical method. The bow of object vessel(DWT5000) is standardized, and modeled by shell elements. The main body of objective vessel is modeled by beam elements that present mass distribution and stiffness of vessel. The buoyancy effect of vessel is considered as linear spring. The two types of fender systems, such as steel and rubber are analyzed in this study. In steel fender system, the steel plates that absorb collision energy by its collapse are modeled by shell element with stiffener. The steel is material modeled elastic-plastic material. In the rubber fender system, the rubber material is modeled hyper-elastic material and the main body of fender is modeled by solid elements. The global impact responses of vessel and fender system are evaluated by explicit dynamic scheme. The results show that the magnitude of vessel collision force are depended on the material behavior of fender system. Also the values of collision load are conservative compare to the those of design codes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.318-321
• /
• 2005

Crashworthy design of a train is a systematic approach to ensure the safety of passengers and crews in railway transportation for the prescribed accident scenarios. This approach needs new structural arrangements and designs to absorb higher levels of impact energy in a controlled manner and interior designs to minimize passenger injuries. In this paper, an evaluation method for crashworthiness of Korean tilting train express is introduced. Crush characteristics for each part of tilting train express are evaluated numerically through 3-dimensional shell element analysis with LS-DYNA. Based on a head-on collision and a level crossing collision scenarios, the crash behaviors of tilting train express are evaluated numerically using full-rake collision simulations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.233-237
• /
• 2009

In this study, we suggest that several approaches to evaluate the collision acceleration value of a car in the article 35 and the guideline 16 of Korean rolling stock safety regulation. There are various methods to evaluate collision acceleration such as; a displacement comparison method by the double integration of filtered acceleration data, a velocity comparison method by the integration of filtered acceleration data, an analysis method of time-velocity curve, or a differential method of time-velocity curve. We compared these methods one another using 1D dynamic simulation model composed of nonlinear dampers, springs and bars, and masses. Also, we applied these methods to a hybrid model, which is made of 3D shell element model and 2D collision dynamics model, in order to evaluate whether 1D force-displacement curve modeling for energy absorbing structures have an effect on the collision acceleration levels or not.

• 터널과지하공간
• /
• 제27권5호
• /
• pp.282-294
• /
• 2017

본 연구에서는 광산안전관리를 위한 충돌방지시스템의 개발 현황과 적용사례를 분석하였다. 광업 선진국인 미국과 호주에서 사용하는 충돌방지시스템의 용어를 정의하고 이용되는 센서 기술들을 비교하였다. 또한 해외의 광산 회사들이 개발한 충돌방지시스템인 $MineAlert^{TM}$ Collision Awareness System, Cat $MineStar^{TM}$, Intelligent Proximity Detection 기술 등에 대해 소개하였다. 국내 광업 분야에서는 충돌방지시스템을 개발한 사례가 없었으며 건설과 철도 분야에서 이와 유사한 개념의 시스템을 확인할 수 있었다. 충돌방지시스템을 도입하면 광산에서 발생할 수 있는 충돌사고를 방지하여 작업자의 안전을 개선시킬 수 있을 것이며, 해외의 개발 사례를 통해 국내 광산 환경에 적합한 센서 기술을 개발하고 적용하는 연구가 필요할 것으로 판단된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.84-87
• /
• 2000

Square tubes used for vehicle structure components have an important role on keeping its stiffness and preserving occupant safety in vehicle collision and rollover in which it experience axial collapse, bending collapse or both. Bending collapse, which absorbs kinetic energy of the impact and retains a survival space for the occupant, is a dominant failure mode in oblique collision and rollover. Thus, in this paper, the bending collapse characteristics such as the maximum bending moment and energy absorption capacity of the square tube replaced by light-weight material were evaluated and presented. The bending test of cantilever tubes which were fabricated with aluminum, GFRP and aluminum/ GFRP hybrid by co-curing process was performed. Then the maximum bending moment and the energy absorption capacity from the moment-angle curve were evaluated. Based on the test results, it was found that aluminum/ GFRP hybrid tube can show better specific energy absorption capacity compared to the pure aluminum or GFRP tube and can convert unstable collapse mode which may occur in pure GFRP tube to stable collapse mode like a aluminum tube in which plastic hinge is developed.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1223-1226
• /
• 2003