• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.646-654
• /
• 2020

This paper is to develop an electromagnetic wave-based sensor that can measure the spatial distribution of precipitation, and to a electromagnetic wave rain gauge (hereinafter, "EWRG") capable of simultaneously measuring rainfall, snowfall, and wind field, which are the core of heavy rain observation. Through this study, the LFM transmission and reception signals were theoretically analyzed. In addition, In order to develop a radar transceiver, LFM transceiver design and simulation were conducted. In this paper, we developed a K-BAND pulse-driven 6W SSPA(Solid State Power Amplifiers) transceiver using a small HMIC(Hybrid Microwave Integrated Circuit). It has more than 6W of output power and less than 5dB of receiving NF(Noise Figure) with short duty of 1% in high temperature environment of 65 degrees. The manufactured module emits LFM and Square Pulse waveform with the built-in waveform generator, and the receiver has more than 40dB of gain. The transceiver developed in this paper can be applied to the other small weather radar.

• Steel and Composite Structures
• /
• v.50 no.5
• /
• pp.595-608
• /
• 2024

In this study, aluminum lathe waste was used by replacing aggregates in certain proportions in order to obtain expansive concrete using recycled materials. For this reason, five different aluminum wastes of 1%, 2%, 3%, 4% and 5% were selected and also reference without aluminum waste was produced. Based on the mechanical tests conducted, which included slump, compression, splitting tensile, and flexural tests, it was evident that the workability of the material declined dramatically once the volume ratio of aluminum exceeded 2%. As determined by the compressive strength test (CST), the CS of concrete (1% aluminum lathe wastes replaced with aggregate) was 11% reducer than that of reference concrete. It was noted that the reference concrete's CS values, which did not include aluminum waste, were greater than those of the concrete that contained 5% aluminum. When comparing for splitting tensile strength (STS), it was observed that the results of STS generally follow the parallel inclination as the CS. The reduction in these strengths when 1% aluminum is utilized is less than 10%. These ratios modified 18% when flexural strength (FS) is considered. Therefore, 1% of aluminum waste is recommended to obtain expansive concrete with recycled materials considering minimum loss of strength. Moreover, Scanning Electron Microscope (SEM) analysis was performed and the results also confirm that there was expansion in the aluminum added concrete. The presence of pores throughout the concrete leads to the formation of gaps, resulting in its expansion. Additionally, for practical applications, basic equations were developed to forecast the CS, STS, and FS of the concrete with aluminum lathe waste using the data already available in the literature and the findings of the current study. In conclusion, this study establishes that aluminum lathe wastes are suitable, readily available in significant quantities, locally sourced eco-materials, cost-effective, and might be selected for construction using concrete, striking a balance among financially and ecological considerations.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.112-127
• /
• 1998

A meeting for Japan Society of Erosion Control Engineering took place, from May 20-21 in Sapporo, Japan, with the presentations of 21 special topics and 185 general papers. Special topics consists of 6 copies on volcanic disaster prevention, 6 copies on the activity report of Earthquake Erosion Control Engineering Society, 5 copies on the management and guidelines of riparian zone and 4 copies on debris disaster occurred in 1997. General papers consists of 10 copies on slope stability, 10 copies on slope failure, 9 copies on earthquake, 41 copies on environmental erosion control, 25 copies on debris flow, 11 copies on warning and refuge, 10 copies on erosion control plan, 11 copies on erosion control project, 10 copies on erosion control facility, 12 copies on volcanic erosion control, 4 copies on revegetation technology, 4 copies on forest hydrology, 4 copies on avalanche, 4 copies on landslide, 18 copies on debris flow and 2 other copies presented by international student. Among the special topics, 5 papers with the titles of the function and structure of riparian zone, the interactive relation of flood and riparian zone, the management method of channel and river forest for controlling debris flow, the forest restoration efforts by native population, the law and social issue for building river riparian zone were presented in the subsection of "The Management and Guidelines of Riparian Zone". Thus, this article summarize and introduce the presented contents which are very important and can be referred to keep environmentally sound-river in the erosion control field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4907-4921
• /
• 2010

The object of this descriptive survey research was to provide basic information source for building objective standards of DNR (Do Not Resuscitate) that can be clinically applied, by analyzing college students' awareness and attitude toward DNR. The participants of the study were 1,267 students from one college of Daegu, South Korea. The structured survey questionnaire was used for data collection, and the survey was conducted from 1-31 July, 2010. The error and percentage was estimated by SPSS 17.0 program, and analyzed with $x^2$-test. As a result of comparing the nursing students' and non-health care major students' awareness and attitude toward DNR, the significant differences were found in the necessity of DNR, reason for supporting DNR, reason for opposing DNR, and DNR decision-maker, among the awareness dimension; among the attitude dimension, significant differences were found in implication of family DNR and self-DNR. Comparing the nursing students' and non-health care major students' awareness toward DNR related information provision, researchers have found significant differences in the necessity of giving information on DNR, timing of the DNR information provision, result of the DNR-related information provision, and guidelines for the DNR information provision. In terms of the difference in DNR's necessity recognition by the demographic information, the significant differences existed based on the religion and the history of blood donation; in terms of the differences in attitude toward DNR decision-maker, the differences were found on the religion and the number of siblings. For the attitude toward family member's DNR, the significant differences existed for the sex, age, economic status, religion, the number of siblings, the history of familial illness and death, and experience of blood donation; the attitude toward the DNR for the self was significantly differed by the sex, economic status, the number of siblings, and the history of familial illness and death. To establish the standards for DNR based on the study, we suggest more well-designed future studies.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.48-53
• /
• 1998

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 1st Industrial Complex that has started since 1975. Soils sampled in 0-3㎝ and 3-6㎝ soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. Change of heavy metal content in soil of the industrial complex were more accumulated 16 to 25% of Cd and Cu, 93% of Pb and Zn, respectively in samples compared with natural soil uncontaminated. But there was no different in Ni content between two soil. Distribution of Cd in soil layer of 0 to 3cm was the highest concentration of 5 ppm more at the textile industries, and then higher at the chemicals and the food processing industries. In 3 to 6㎝ soil layer Cd content was the highest concentration of 5 ppm more at the metal processing industries, and then higher at the textile industries. Cd accumulation in soil was different according to a kind of industry and soil depth. Cu content was the highest value of 400 ppm more in soil layer of 0 to 3cm at the manufacturing electric wires industry area and showed the accumulation phenomenon in soil layer 3 to 6cm at the ohmmeter, machines and electric wires industry area. Ni content was 35 ppm more in soil of the metal plating and processing industries regardless of soil sampling layer. Then it was 25 ppm more in soil of the building stones and semiconductor industries. Pb content was from 400 to 1000 ppm in soil of the chemicals and textiles industries regardless of soil sampling layer. Zn content was 1200 ppm more in soil of the chemicals and silk fabrics industries regardless of soil depth, and then lower in order to soil of leather processing${\le}$metal plating industries. In conclusion, changes of heavy metal kinds and content in soil of this industrial complex area were caused by the type or kinds of industrial activities. Changes of Pb and Zn content in soil were dominated at this area.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.1 s.52
• /
• pp.1-14
• /
• 1996

To evaluate the health risk of the workplace environment of a general hospital toward the hospital workers, a questionnaire survey on the perception of risk at the workplace environment and environmental measurements at 27 locations with 240 workers in the hospital were made from October 25th, 1993 to October 30th, 1994. The results were as follows ; 1. By the environmental measurements, 86 workers(36%) were found to be exposed to poor or harmful degree of general illumination, 193 workers(80%) were exposed to poor or harmful local illumination, 34 workers(14%) were exposed to poor or harmful degree of thermal condition and 180 workers(75%) were exposed to poor or harmful noise level, but nobody was exposed to poor or harmful dust and toluene concentration. Also nobody was exposed to poor or harmful level of radiation or anticancer/antibiotic agents. 2. The subjective perceptions on the environmental conditions felt by the workers were different from the objective findings by the environmental measurements. The workers underscored the poor illumination state and overscored the dust concentrations. Also workers oversensitized about the thermal condition, the noise level, the radiation level, the toluene concentration and anticancer/antibiotic agents 3. The sources of noise were the dialogue(179 workers) and the office instruments(131 workers). The sources of dust came from the clothes(108 workers) and the building materials(79 workers). 4. The questionnaire survey showed that the 28 workers were exposed to poor or harmful level of the antibiotics, 10 workers to alkali or acid and 6 workers to drug dust in the pharmacy but the above findings could not be proved by the environmental measurements.

• Journal of agricultural medicine and community health
• /
• v.28 no.1
• /
• pp.67-77
• /
• 2003

Objectives: This study is designed to suggest the health service goals necessary for providing the more efficient services relevant to the requests of the community, through the evaluation on the operating status of the unified health subcenters. Methods: We visited total 5 unified health subcenters comprising 3 ones located in Gyeongsangbuk-do and 2 ones located in Gyeongsangnam-do from December 2000 to January 2001, and interviewed about the pre- and post-unified status related to manpower, facilities, equipment, medical service and health service quality, and the problems and improvement plans of the unified management. Results: According to the evaluation on the manpower before and after the unification of the health subcenters, the total employees increased by 2.8 persons on average from 6.8 to 9.6 persons in the investigated subjects. The numbers of doctors, dentists and nurses were almost the same as before. There were no clinical pathologic technician and radiological technician before but they were appointed to duty in 3 unified health subcenters later. The unification of the health subcenters has produced slight increases in the frequency of the medical service and dental treatment and considerable increases in that of the physical therapy and laboratory tests. In relating to the changes of the health service, the cases of visiting health care and ambulatory medical service, and the total number of health education participants were greatly increased after the unification. The number of cases undergoing the vaccination and cervical cancer screening was similar to that of the pre-unification while the patient number of the registration to hypertension or diabetes showed a tendency to increase a little. Since the unification of the health subcenters, the frequency of laboratory tests has been increased, but the quality of health service has not been improved yet. Nevertheless, the unification seems to be positive according to the result of the great improvement in visiting health care, ambulatory medical service and health education service. The problems of the unification of the health subcenters were indicated in indefiniteness of the service details between the workers; excessively large building hard to be effectively managed; insufficient medical instruments, inappropriation of working expenses, lack of professional training for the health education, etc. Conclusions: For further active functions of the unified health subcenters, the minimal allocation basis to appoint doctors, nurses and administrative workers to do the duty should be differentiated from the basis for a health subcenter, and the fundamental instruments needs to be expanded to improve the quality of the medical service and visiting health care service. Moreover, the unified health subcenter needs to have definite service details between the workers, and should improve the working efficiency through the development of service-related guidelines.

• Journal of Hospice and Palliative Care
• /
• v.4 no.1
• /
• pp.26-40
• /
• 2001

Purpose : The purpose of this study was to develop task guidelines for hospice team members. The task range of all personnel who work for hospice institutions was identified, and a tool describing roles and tasks of the hospice team members was developed based on review of related literature, both domestic and international. Methods : The content validity of the tool was assured by an expert panel through two phases of discussion. The first phase of the study included a survey conducted from December 1999 to January 2000 for a total of 126 hospice experts and practitioners affiliated with domestic hospice institutions. The second phase of the study included 35 subjects. The data were collected using a survey when the investigators visited each hospice institution. The data were analyzed using descriptive statistics. Results : 1) In the first phase of the study, all items scored over 80 points in CVI were selected as the roles and tasks of hospice coordinator, nurse, pastor, social worker, pharmacist, nutritionist, therapist, volunteer, and nurse aide. However, two items were excluded because they scored below 80 points: an item describing eligibility of a physician, a person who has a license for managing anesthetic agents was scored as 78.6 points, and an item describing the eligibility of the team leader of volunteers, a person educated at the graduate level was scored as 74.7 points. 2) In the second phase of the study, all items scored over 80 points in CVI were selected as the roles and tasks of hospice nurse, pastor, social worker, pharmacist, nutritionist, therapist, volunteer, and nurse aide. Of the roles of the hospice coordinator, however, the item scored as 77.9 points, assess and plan a patients physical, social, emotional, and spiritual status, and, of the roles of the team leaders of volunteers, the item scored as 78.6, attend a team meeting once a week and participate in building an standard nursing plan for patients were included in the tool since they scored over 80 points in the first phase of the study. Conclusion : The developed task guideline should be further modified and revised based on the findings of a preliminary application in the actual field. There is also a need of continuous research for developing more culturally-appropriate task guidelines for hospice team members.

• Journal of agricultural medicine and community health
• /
• v.30 no.2
• /
• pp.227-240
• /
• 2005

Health promotion has more comprehensive approaches in recent years. Nevertheless we accept the concept of health promotion differently, we are agree on that community is the most important field in health promotion which includes population at the aspect of health policy, individual skill and, environment. And there are a number of different approaches to health promotion. In them, 'population approaches' and 'high -risk group approaches' has the most different characteristics. 'Population approaches' is equally important or more important than 'individual approaches' for maintaining and promoting population health. Almost part of this article contents is the summary of the guideline and population strategy of health promotion in Korea, 1999 - 2005. Community based health promotion program should be reinforced, integrated, comprehensive, collaborative through efficiently utilizing community resources. Recent new orientation of community health program is integrated health program, we can find this orientation at Ottawa charter 1986. Comprehensive approaches with the determinant factors for health are essential task. Physical activity is a key health determinant. The population-health approach suggests that educating people about physical activity is not enough. Individual behavior changes are important too, but need to be balanced with strategies for environmental change. Population strategy with physical activity for health promotion should be developed through improving social and physical supportive environment, linking and integrating community resources between public and private sectors in national, regional and local level. Continuous public education and social marketing should be provided through collaborating with community physical activity organization, facilities, work-places and school for increasing concern of all the people of community about physical activity. Governments, agencies and citizens should held and participate to building movement. And the strategy that various 'active for life' program should be developed, delivered, maintained and reinforced continuously. Basically, adequate and sufficient financing, developing human resources, policies and legislation would be provided and supported fully too. At last, research development and knowledge exchange are required domestically and internationally. In Korea, we had classified the category of strategic priority of physical activity programs by environmental support, life-course approach, high-risk group approach and disease group approach for physical activity program based on community health center. Community based core programs for physical activity that includes infrastructure building and establishment of supporting environment, community campaign, health promotion education and public service announcement, physical activity programs for elderly and obesity, exercise prescription program.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.138-144
• /
• 2010

Purpose: Despite the rapidly changing healthcare environment, healthcare organizations have recognized the importance of patient safety management. But patient safety management has the problem of the lack of participation of members due to the process of focusing on the follow-up service and punishment. The department of nuclear medicine in Uijeongbu St. Mary's Hospital started this research to reduce the near miss and prevent patient safety accidents by both initiating the participatory near-miss-proof activities as an advance management and constructing a system without disadvantages of reporting. In addition, this research aims to establish a differentiated patient safety management system in the department of nuclear medicine. Materials and Methods: 1. Colleting cases of team members' past and present near miss and accidents(First data collection). 2. Quantifying the cases of near miss and accidents after identifying the degree of importance and urgency through surveys(Second data collection). 3. Quantifying cases and indentifying important points of contact through data analysis. 4. Making and standardizing a manual for important points of contact, and initiating participatory activities to prevent errors. 5. Activating web-based community for establishing the report system of near miss. 6. Estimating the result of before and after activities through surveys and focus group interviews. Results: 1) Quantified safety accidents and near miss in the department of nuclear medicine. About 50 near misses a month and one safety accident a year. 2) Establishing improvement measurements based on quantified data. About 11 participatory activities, the improvement of process, a manual for standardization. 3) Creating a system of safety culture and high participation rate of team members. Constructing a report system, making a check list and a slogan for safety culture, and establishing assessment index. 4) Activating communities for sharing the information of cases of near misses and accidents. 5) As the result of activities, the rate of near miss occurrence declined by 50% and the safety accident did not happen. Conclusion: The best service in the department of nuclear medicine is to provide patients with safety-guaranteed high-quality examination and cure. This research started from the question, 'what is the most faithful-to-the-basics way to provide the best service for patients?' and team members' common answer for this question was building a system with participation of all members. Building a system through the participatory improvement activities for preventing near miss and creating safety culture resulted in the 50% decline of near miss occurrence and no accident. This is a meaningful result from the perspective of advance management for patient safety. Moreover, this research paved the way for creating a culture to report and admit near miss or accidents by establishing a report system with no disadvantage of reporting. The system which sticks to the basics is the best service for patients and will form a patient safety culture system, which will lead to the customer satisfaction. Therefore, all members of the department of nuclear medicine will develop a differentiated patient safety culture with stabilizing the established system.